I thought it will be good to write a brief explanation for the people who use the PwnageTool for the first time like me :) Yes I did it and unlock works for me. I also checked the exchange support, youtube, appstore... All works fine.
I had a 2g iphone 1.1.4 that has been unlocked by ziphone software. I did it once and I used it till now without a problem. I was a little bit afraid to try pwnagetool 2.0 because of what zibri may have done to my iphone, but it worked great and it will work for you.
Here are the steps I took;
1. I upgraded to Itunes 7.7 2. Connected my iphone. It deteced the iphone and asked for an upgrade, I just cliked download only. This is how I got the original firmware form apple :)Then disconnected iphone just after the download started. 3. Before opening the pwnagetool I put my iphone in dfu mode. I tried at least 4 times to do that. The trick was to hold down the power and home botton wait until it restarts. Then pluck it into the dock wait for ten seconds during the apple logo and then release it . It is totally black but itunes recognized it as in recovery. This is the dfu we need. 4. I did not choose the expert mode. Chosed iphone 1g . It had found the restore firmware that itunes had already downloaded. Asked me for the bootloaders. I browsed both of them respectively and then it created the custom ipws. 5.Clicked next and it recognized the dfu but asked for shutdown. I had problem here before, It said that it can not put the device in dfu mode. This time it detected and asked for a shutdown. I just pressed both power and home button until it restarted. Then watch for the screen. It tells you when to release the power button and when to release home button. Then it was ok. My iphone was ready to be restored with the custom ipws. The tool gave a message everything ok and i must just close pwnagetool and use itunes.
6. I didn't do anything to iphone just left it where it was in dfu mode. Itunes had already gave the message that it needs to restore my iphone. I just said ok. The restore screen was in front of me. Just pressed alt button on the keyboard and while pressing it i clicked restore, and I showed itunes gently my custom ipws. It restored it successfully.
7. After that the phone rebooted, bootneutral was opened automatically , first it neutral the boot and then flashed the baseband. All was automatic. Then after the last reboot, there it was jailbroken and unlocked with all features working.
I hope you guys get lucky as I did.
Thanks again to the dev team.
jon
· 1 year ago
This is for a Mac only huh? Not windows yet?
andrew
· 1 year ago
When's the Windows version coming out????
kanna
· 1 year ago
here are the essential links for the iphone unlock boot loader bl39.bin and bl46.bin
Guys, I'd like to help you translating PwnageTool in French, could you please give me an email adresse on my Disqus profile ? (There is a link to my Facebook profile on Disqus) I don't want to post my email adress here.
Sohaibkkhan
· 1 year ago
Hi there! Any other links than these ones?? Does "3G iPhone Firmware 2.0 Pwnage for Windows" really work on windows?
ciavaldp
· 1 year ago
Just have a look at the torrent's description, you'll see the tutorial. I haven't tested yet but seeing the tuto I think it works, that's why I spent time bringing the files on Demonoid and creating IPSW for win users.
I have a great FAST download link posted on my website! Go to http://www.herefordhosting.com to download the iPhone Pwnage Tool 2.0 now! There have been over 190,000 people on my site as of yet! Thanks Dev Team for all their hard work!
@ sendblink23 can you please tell me how to create a boot image on Photoshop CS2?? I am trying but i can't. or please direct me to some place where they have instruction for that. thank you
mano1979
· 1 year ago
Find your pwnage tool in your programs folder Klick with right mouse button and select " show package files" (or something like that) Then look for the file called logo.PNG. Open it in photoshop. Mak sure that you use the color profile of logo.png and not the one you use with photoshop!!!. Adjust the size and pictures and what you want. Make sure that before you save the file, that you flatten the image!!!
Then click save and you're done (make sure to backup the original logo or save as another name )
Haque
· 1 year ago
How can i make sure that the color profiles are the same. this is where i am having trouble. because i made a custom boot image before using Photoshop CS and now i have upgraded to Photoshop CS2 and when CS2 saves the .PNG file it saves it in a different color profile than the CS did. Sorry if this a very amateurish question. I am no graphic designer I use photoshop for fun. Thank you guys
I was able to load my .PNG created on CS2 into the new .iswp. But with a work around. It was initially rejected by pwnage tool when I browsed and selected it (i am guessing because of different color profile). then i selected the one that created in CS and it accepted it. Then i went to the folder where i saved my custom boot image (made in CS) and moved that .png file and replaced it with the new .png file (made is CS2, the one pwnage was rejecting) and renamed with the same file name as the .png created in CS. then returned to Pwnage tool and created the custom .iswp. then when i restored it to my iPhone voila my newly created boot .png (the CS2 created one) image was on the screen. I don't why or how it worked, but i can say is that it did. so thought i would share for people if they are having similar problems like me.
I would still like to learn how to create it on Photoshop without pwnage rejecting it. thank you guys
P.s. Thank you Dev-Team you guys are very generous for providing us with this fantastic tool at free of charge. Very very grateful. And wonderful work!!! A++++++++++
Samuel Jackson
· 1 year ago
Holy Shit Fuck that was hairy!!!! Excuse my fowl language but hell almighty. I had used iLiberty+ before. I downloaded the two BL thingy's 3.9 and 4.6. Then stumble fucked my self around for two hours. Thank for the details in your post it clarified a few things I had not gotten correct. 20 Clout Points to you good sir.
kanna
· 1 year ago
here are the essential links for the iphone unlock boot loader bl39.bin and bl46.bin
I tried on two completely different macbooks. The program bounces in the dock but doesn't load. I see the pwnage tool in the upper left hand side of the screen but no application window.
I have tried everything. people are having the same problem and posting but generally getting ignored.
any ideas?
Michael
· 1 year ago
yer i got the same problem, i tryed on both my macs,, there both runnig leopard and still the same thingss
has anyone got any ideas??
will
· 1 year ago
ahhhhhh same thing on my macbook!! i think there might have been an osx update in the past few days, if that helps
Leebo
· 1 year ago
nope its not that Im running 10.5.4
popel75
· 1 year ago
running Intel IMAC with Leopard 10.5.4 with all latest updates, app bounces and does not start...., can't even quit the software
vlad
· 1 year ago
did you try another mirror? after uninstalling the entire program? also try under root user that helped me out.
OrangesApples
· 1 year ago
I managed to get the app running by going in the OS-X Activity Monitor and killing the PS sub process of pwnage tool. I don't know if it works after this btut at least the app is running.
Eidan
· 1 year ago
Same Here....it's just jumpin' in the dock..
Leebo
· 1 year ago
This works, in so much as it gets the app working. Ive no idea whether it'll pwn the iphone or not yet as Im not that brave. I may wait for the Dev team to address this and update the app before using it. Suffice to say though by going into Activity Monitor & choosing 'All processes' I saw the process called 'ps', I force quit and the Pwnage tool just started. Itd be good for more people who try this method , and who are braver, to try to see if it gets the app working on their Macs and try to upgrade their phone, as I say if they're feeling brave. I know that seems cowardly but Id prefer to wait and see
Eidan
· 1 year ago
i've no ps process..
MRM
· 1 year ago
I'm running intel iMac with the latest OS, latest iTunes, and mine worked right away.
Mike
· 1 year ago
It works fine now, but only on my second mac. I tried killing ps sub - did nothing. I booting into safe mode after clearing all 3 caches and repairing permissions and it worked then on the second book.
First book did everything and still doesn't work.
I did the pwnage and the phone is now pwned 2.0 and works fine. couple of weird errors with some apps from the app store but otherwise works perfectly.
thanks pwnage folk
Leebo
· 1 year ago
I cant get this to work either. Running latest everything, fully up to date with apps too.
Ryan
· 1 year ago
Add me to the list of people with the "bounce but no launch" problem. My Machine is Leopard, PowerBook G4, I have run that program that strips out Intel and foreign language libraries, and besides that I'm basically running 'stock'
Brian
· 1 year ago
Me too. Icon bounces but doesn't launch. I'm running a Mac Pro 2.66, 3GB of Ram, 10.5.4. AND, I have the same reaction on my Powerbook (G4 800) running Tiger. What the heckstein?
Ryan
· 1 year ago
GOT MINE WORKING!!
Well I got it to launch, I haven't tried to update yet, but I thought I'd post here anyway.
This could be caused by lots of different things, so if it doesn't work for you sorry Charlie, but what I did was updated iTunes to the latest version (I had not updated yet). Still wouldn't work so I did a crazy thing, I rebooted. Now it launches. I don't know if it was the iTunes update, the reboot, or a combination of both, but after I did both it launches.
justme
· 1 year ago
Neither of those did the trick for me... I have the same bouncing problem but rebooting didn't work, and I already had the latest iTunes.
However, I found these iTunes errors in the log: "Could not perform SSL Handshake" and "Could not enable SSL". I think they are related because they happen every time I start PwnageTool.
Maybe this is of some help to the devvers? PS Thanks for releasing the app!!!
Lancelot
· 1 year ago
Maybe before you use pwnage, do a restore in itunes to factory default. after that us the pwnage.
Lancelot
· 1 year ago
sorry realize now it is about the app
kLAcK
· 1 year ago
same problem.... got mine from a rapidshare, can we anyone post an md5 sum one that works?
kLAcK
· 1 year ago
got mine from an offical mirror, same problem
kLAcK
· 1 year ago
I have a PowerBook G4 running 10.5.4 if that helps
jakeyboy
· 1 year ago
mine doesn't work either, anyone got any success?
funkymo
· 1 year ago
Same Issue with leopard 10.5.4 on my macbook Pro
Kyrios
· 1 year ago
Me2. Just bouncing and bouncing. Already deleted all caches, rebootet 5 times, ..
Nothing in console log for me.
bala
· 1 year ago
you'll have to be at least 10.5 to get pwnage 2.0 to work. that's what i'm suspecting. Im on Leopard 10.5.4 and it works perfectly.
kelly Hendricks
· 1 year ago
------------TO EVERYONE HAVING THE "BOUNCING," NOT LAUNCHING PROBLEM-----------
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem. please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
- Launch Pwnage Tool 2.0 - Open "Activity Monitor" (in utilities folder) - Find the process "ps" (make sure you look under "all processes") - KILL IT!
Pwnage Tool will now open!
Thanks to flag420 for discovering this.
zoinks
· 1 year ago
This worked for me, thanks for solving the problem.
Maybe update the post with these steps?
vmx
· 1 year ago
thank you is the solution its work right now
random_guy
· 1 year ago
to fix not lunching problem: 1. open pwnage tool 2. open activity monitor (applications/Utilities/activity monitor) 3. in activity monitor scroll down the list until you find "ps" 4. highlight ps and click quit process in the upper left hand corner and click force quit. 5 change to pwnage tool again, it should work.
this worked for me but i take no liblitey if your computer is messed up afterward. I did not discover this!
Pagoboy96799
· 1 year ago
Doesn't work, darn it. Pwnage icon appears in the doc, shows up in the upper left, then... nothing. I've gotten an error or two, in addition. MacBook Pro, 10.5.4, iTune 7.7, 1G iPhone.
jc
· 1 year ago
put it in dfu
HanoiMac
· 1 year ago
I've got the same problem on 2 iMacs, then i tried to shut the wifi (or internet, i don't know..) then it worked (apparently only on 1 iMac, but it worked!!!)
Thanks iphone dev team!
ducos
· 1 year ago
No problems! Running 10.4.11 iTunes7.7 Great work Dev Team.
cez1
· 1 year ago
what happens if you can't turn off your iphone or put it into DFU mode????
Anthony
· 1 year ago
how can you not turn your phone off. just hold down the buttons till they do
cez1
· 1 year ago
i've tried this in "emergency call" mode and screen gos off, but inthe recovery mode (usb + iTunes logo) it does not work
cez1
· 1 year ago
Actually, even in "emergency call" mode, pwnage does not recognize its off. I never get the red slider.
noobatron hackzoarer
· 1 year ago
hold down the home button and the sleep/wake button (while iphone is on) for a few seconds and this will force shutdown
craq
· 1 year ago
im stuck at this point too :(
i can get everything to work up until the very last part. it asks if my iphone has been pwnd before, i say no, it says dfu mode failed to recognize.
noobatron hackzoarer
· 1 year ago
just restore your phone with itunes then quit pwnagetool and just try everything again it worked para yo :)
krijn
· 1 year ago
try using NOT LEGIT instead of LEGIT. It seems to work with my ipone
thanks i just posted ... it seems as though there is either a problem with my sleep/wake button or i'm an idiot ... or a bit of both?
bala
· 1 year ago
you'll have to learn DFU or no go. It's an important process. Pwnage 2.0 needs this mode for it to do it's work.
Jesper from Sweden
· 1 year ago
I followed your steps and it works :) Thank you!
jash
· 1 year ago
Did they explain why there isn't installer support yet?
clarion
· 1 year ago
Because Installer doesn't work on 2.0 yet?
fshalabi
· 1 year ago
Just had one question.... well I be able to cancel the $30 internet media package, that was mandatory when activating, once i jailbreak the iphone 3g?
dh
· 1 year ago
I don't think so. Jailbreak means you can install other software on it, not just software from the Apple apstore. Even with unlock, which you can't do yet with 3g, you will still need internet access. I think this will still be traced to your sim card, so not having a package could lead to roaming charges. However, I am not sure how this will work. I am assuming the internet media package you have is to access the net from your phone, likely on a 3g network. To be frank, sounds cheap to me - I am in Canada.
fshalabi
· 1 year ago
see, my plan was to buy the iphone 3g with a $40 a month talking plan and a mandatory $30 a month internet plan with At&T(phone company). A representative at at&t told me once if i were to cancel the internet plan on that line later, the iphone will no longer function for use on that line. I figured jailbreaking it would allow me to cancel the internet plan and still be able to use the iphone. I would just use wifi for internet or get charged the standard charge per byte. Would jailbreaking allow me to do this?
elmirod
· 1 year ago
Hey your from Canada So am I i just did the whole process but the phone no longer connect to the Fido network, are you fido or rogers?
let me know if you had the same issue and how did you rresolve it!
Thanks
dh
· 1 year ago
fido...mine doesn't work either. Doesn't recognize the sim card.
dh
· 1 year ago
Working now. I discovered just how much of an idiot I am - i wasn't exactly following the last instruction. Once the ipws is created, you actually have to use it - if you just click on restore in itunes, it uses the ipsw from apple; you must use "option-click" on restore then browse on your desktop (mac) to find the custom ipsw and then you are good to go.
alme
· 1 year ago
I did exactly what u said here.everything went fine but now I dont have my iphone unlocked.It says slide for emergency calls and when I connect to itunes is says that it doesnt support this sim card.Before i was using 1.1.4 with ziphone.any help please?
edc
· 1 year ago
same problem here ...
Yëco
· 1 year ago
Same here :(
Andy
· 1 year ago
same here as well . . .
Chris
· 1 year ago
same here
Sam
· 1 year ago
same here!!! HELP !!!!
dh
· 1 year ago
At the very end of the process, make sure when you are in itunes you don't just click on the restore button - you must hit option click (alt click with an external keyboard) to browse for the ipws that is now on your desktop, and once you find it, then click OK, and you should be good to go. If you don't, it just uses the file you downloaded from Apple by default, not the one you just created. Of course, this locks out your phone.
jash
· 1 year ago
you probably said you had a LEGIT iphone when you DON'T! so the program didn't use bootneuter to UNLOCK your iphone... START ALL OVER... if you have any other questions I'll try to answer at http://coachhowland.blogspot.com/2008/07/pwnage...
Beffy
· 1 year ago
@jash: thanks a bunch mate. I did it EXACTLY like you said. Left everything alone when iTunes showed a window and the iPhone was being flashed. After the process I configured as a new iPhone.
edc
· 1 year ago
thanks, that solved my problem
noobatron hackzoarer
· 1 year ago
dear god i love you i couldnt figure out how to restore to a custom ipsw
smm
· 1 year ago
thank you
Zerokid
· 1 year ago
WINDOWS VERSION HEREWINDOWS VERSION HEREWINDOWS VERSION HERE
Thanks for it but im in UAE and dowload link of Custom 2.0 frimware is block :s do you have any other link to download this frimware?
isotonic
· 1 year ago
Seems I just de-activated my phone. It was previously 1.1.3, unlocked and jailbroken with iNdependence.
I used the Pwnage tool to create the custom ISPW, restored my phone first in recovery mode (my fatl mistake?), the in proper DFU mode. iTunes now gives me this error, and I can only make emergency calls. -------------- The iPhone "iPhone" cannot be used with iTunes because the information required for activation could not be obtained from the iPhone.
Check that the sim card is inserted in your iPhone and that it is not PIN-locked. ------------- Help please!
jash
· 1 year ago
just try to pwn it again... put it in DFU mode
HOLD DOWN BOTH POWER AND HOME TILL SCREEN GOES BLACK LET GO OF POWER BUTTON LEAVE HOME BUTTON PRESSED TILL ITUNES RECOGNIZES IT...
If Itunes doesn't recognize it after 20 seconds REPEAT process... timing is VERY important and it takes everyone a few tries to get it... your phone is fine! relax...
isotonic
· 1 year ago
Thanks. I tried that but I ended up solving it by doing it in expert mode and trying a couple of different options. I think I selected Neuter bootloader > Update bootloader > downgrade to 3.9.
vilgrain
· 1 year ago
you probably said that you were a legit iphone user, when you actually aren't. The app is way to cute and it makes it hard to use. The question was really meant to be 'Do you need to unlock your phone to run on an unofficial provider?'
Answering that you are not a legit user will create a firmware that will unlock the phone on first run using 'Bootneuter'.
Honestly I respect the impressive skillz that went into this app, and I think geeks should have their chance to have fun and include jokes, but this app has a pretty low usability factor.
Andy
· 1 year ago
Everything seemed to install just fine until it booted for the last time. It continues to show nothing but the "Slide for Emergency" screen. How do I get out of this? Thank You
Josh
· 1 year ago
Can you help I cant seem to get it right I keep getting error 6 when trying to restore with custom. I hold both until it restarts count the 10 sec and it goes black but nothing still. It will restore to the apple official like nothing happened but cant seem to get it to take with the custom. A video or anything would be helpful
tonyD
· 1 year ago
I am having exactly the same problem and I am unable to find and earlier version of pwnage to try that.
have tried this on 3 intel macs all with the same results...
Jatoskep
· 1 year ago
I'm getting this error as well, has anyone found a solution?
trout4u
· 1 year ago
Hay guys. This is what I needed to do. Its kind of tricky. I shut off my phone --complete shut off. Then I held down the power button and the home button for 8 seconds--TOGETHER!! Then I let go of the power button but still holding down the home button. The iphone screen is black but is working. It, the pwnage tool, will let you know then that is in DFU mode or not. If you fail just keep trying it. try not to pay much attebtion to the "counter" instructions on the screen. they are incorrect. Remember, its tricky but keep trying. It took me 2 or 3 times to get it but thats how you get it in the correct DFU mode. Then, when you succeeded, go to itunes and OK in the box that tells you "your iphone is in restore mode and needs restoring"
Then press OPTION key (ALT) and click RESTORE at the same time. you will see a drop down menu--click the ipsw in the applications folder and click open. That will work.
I will answer more questions if you reply...Thanks from Seattle
Connor Brown
· 1 year ago
do you start with the phone plugged in? and does this work with the 3G?
Connor Brown
· 1 year ago
nevermind it worked perfectly thanks
trout4u
· 1 year ago
No. you dont plug in the phone until you get to the DFU page in the tool. After it asks if you have ev.r PWND your phone before. If your not sure, click no and then plug in your phone. I dont know if it works with the 3g. I have a 2g and it works well for me.
Josh
· 1 year ago
Can you lend me a hand I just cant seem to get the DFU right
Frederick231
· 1 year ago
Hi Everyone,
I had 2 iphones - mine was running 1.1.4 hacked in Australia and this tool worked no problems.
HOWEVER - the point of this post is that I also had a friends iphone who had upgraded to 2.0 by mistake and pwned ALSO WORKED.
The steps to take for hacking an already upgraded 2.0 are (do NOT have your iphone plugged in)
1. Open up the pwned 2.0 2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work 3. Select the 2.0 firmware and also select relevant *.bins 4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6" 5. Go back to main menu and enter General Settings --> select Enable Baseband Update 6. Then build the firmware and save it to your desktop 7. Once the firmware is built, pwned will ask you to plug in your iphone via USB. 8. It will then step you through the process of enter DFU mode 9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded) 10. Hold down ALT (on MAC) and select the firmware on your desktop 11. iPhone will update - LEAVE IT for the entire process. 12. It should install and all will work :)
Cheers
raffi
· 1 year ago
i'm still getting the 'u fail' cannot enter dfu mode!
Frederick231
· 1 year ago
Hi,
I actually REINSTALLED Firmware 2.0 on this phone as my mate had tried to downgrade. This meant it was a FRESH copy of 2.0. I then started at Step 1 above.
iloveiphone
· 1 year ago
Dear Frederick231, Thank you very much for your instructions. I followed your steps to the letter and now my "baby" is born again!
machappy
· 1 year ago
Thanks, I have this problem myself. I'm just wondering which are the relevnat *bins to select? And how do you build firmware? Does it do it for you? Thanks.
SuperRedhead
· 1 year ago
Short question: when i am trying to buit the custom firmware the tool ist not asking me for the *.bin. It will built the custom firmware but as ia said no *.bin is included. Does anybody has the same situation? Thanks for Help
Frederick231
· 1 year ago
Hi
If it doesn't ask you for the bins - just try it anyway as you have already upgraded to a higher baseband anyway as your at 2.0.
Let us know if works :)
Fred
Horseandhound
· 1 year ago
Thank you so very much. My iphone is reborne.
Annietofu
· 1 year ago
hi frederick231, where did you find the 2.0 firmare and relavan *.bins files? please respond back. I accidently upgraded to 2.0 as well
Frederick231
· 1 year ago
Hi Annietofu,
Look at the very top of this page. You should find lots of links to all the files you need.
Frederick
cell
· 1 year ago
Hi!
I have the 3G. There is the error 6. Any idea what i have to do?
StartsWithAnF
· 1 year ago
Thanks Frederick231! These were finally the steps bringing my iPhone back to life.
Annietofu
· 1 year ago
hi i found it but after it made the custome file it said it fail to go into DFU mode. When exactly did you plug your iphone in thanks.. can you email me if you have time at van213@nyu.edu thanks
Frederick231
· 1 year ago
Hi Annietofu,
Doesn't really matter if the pwned APP can't put you into DFU mode. You can do it yourself.
1. Turn off the phone & plug into USB (connected obviously :P) 2. Hold the power and home buttons at the same time for 10 secs 3. Release power button and continue holding home button 4. iTunes will recognize the phone 5. Hit "Option/ALT" key and click restore. 6. Select the firmware on your desktop 7. Await 2.0 love (feel free to drink a beer at this point)
Frederick
Annietofu
· 1 year ago
hi theres an unknown error occurred (1600) now.. I dont know what that means :( can you still help me with this problem
Annietofu
· 1 year ago
ok i think i did something bad. It now gives me an unknown error (16). I tried restoring it many times and it always pops with this msg, even restoring on the non custom version. What do you think this means?
Frederick231
· 1 year ago
You can't stuff anything up :)
If nothing works - reinstall an "official" version of firmware 2.0 and start again at the beginning making sure everything is correctly set up.( i.e. device support folder etc etc and follow steps at the top)
Its really "impossible" to brick your iphone (famous last words! :D)
Annietofu
· 1 year ago
hi fred.. i have a couple of questions. I tried playing around with the app store and I cant seem to use any of the programs there becuase they said they do not recognize my password.. the ones i downloaded into my app file in itunes does not work nor when I open up an app it automactically quits. Let me know if you can solve this problem. Thanks
Frederick231
· 1 year ago
Hmm not sure. You need an Apple iTunes password to make any apps work. Try logging into iTunes and resetting your password.
This is the password thats required to make the apps work.
F.
Annietofu
· 1 year ago
hi frederick, after the custom built the file, it told me if i pwnage the iphone before and i press no. then after it didnt take me to the steps to go into DFU mode or anything it basically gave me "
2008-07-20 09:36:17 - Successfully built custom .ipsw file at '/Users/dannynguyen/Desktop/iPhone1,1_2.0_5A347_Custom_Restore.ipsw'. 2008-07-20 09:36:25 - Failed to prepare x12220000_4_Recovery.ipsw file."
idont know what that means, if you can help me that would be awesome!
Frederick231
· 1 year ago
No probs - you just need to follow the instructions at the top.
1. Open Finder 2. Goto "Mac HD" 3. Goto "Library" and then to "Itunes" 4. If "Device Support" EXISTS - open folder and delete everything in there. 5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
:) It will solve the "Failed to prepare x12220000_4_Recovery.ipsw file."
Frederick
Frederick231
· 1 year ago
PS - you will need to start again at the beginning again so you correctly create a *.ipsw file.
Annietofu
· 1 year ago
IT works NOW!!!!! THANKs FREDERICK231 and dev team! I have one last question, I have a backup from my old iphone. Should i restore it or set up as a new iphone? Let me know thanks. Again thank you sooooooo much Annie
Frederick231
· 1 year ago
Glad I could help Annietofu. My friend was pretty upset as well and now she is stoked - so can imagine you are too :)
BTW - yes you can upload the backup. Backups don't affect the firmware - its just sms, phone nos etc (and I think it says this when you load it in itunes. i.e. something like "backup old file? this wont affect firmware"
Cheers & Goodluck with 2.0!
Frederick
Tiffany
· 1 year ago
I took a deep breath and just clicked Restore from Backup and everything works fine with me! All my recents and favorites are in place and pictures and my old apps that I had on my platform.
iplay
· 1 year ago
disconect your iphone untile pw ask for it
Frederick231
· 1 year ago
iPhone 2.0 Upgrade Steps for 2G iPhones ACCIDENTALLY Upgraded to 2.0 already.
Follow and check all steps and all will work.
=== Pre-upgrade Checks === 1. Restore your iPhone with the Original & Official Apple iphone 2.0 software. 2. Phone will be "emergency" only status.
=== Device Support Folder === 1. Open Finder 2. Goto "Mac HD" 3. Goto "Library" and then to "Itunes" 4. If "Device Support" EXISTS - open folder and delete everything in there. 5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
=== Download Bootloaders === 1. You need both 3.9 and 4.6 (available via 100s of links on this page - particularly at the top)
=== Upgrade Steps === 1. Open up the pwned 2.0 2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work 3. Select the 2.0 firmware and also select relevant *.bins 4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6" 5. Go back to main menu and enter General Settings --> select Enable Baseband Update 6. Then build the firmware and save it to your desktop 7. Once the firmware is built, pwned will ask you to plug in your iphone via USB. 8. It will then step you through the process of enter DFU mode 9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded) 10. Hold down ALT (on MAC) and select the firmware on your desktop 11. iPhone will update - LEAVE IT for the entire process. 12. It should install and all will work :)
=== If DFU Fails === 1. Plug iPhone into USB & then TURN OFF (connected obviously :P) 2. Hold the power and home buttons at the same time for 10 secs 3. Release power button and continue holding home button 4. iTunes will recognize the phone in "Restore Mode" 5. Hit "Option/ALT" key and click restore. 6. Select the firmware on your desktop 7. Await 2.0 love (feel free to drink a beer at this point)
Hope this is all clear enough for everyone :)
Frederick!
Sereni
· 1 year ago
For the device support folder steps: 1. Open Finder 2. Goto "Home" (command-shift-h) 3. Goto "Library" and then to "iTunes" 4. If "Device Support" EXISTS - open folder and delete everything in there. 5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
Very subtle difference; the folder needs to be in your home directory's Library (too?)
silberg
· 1 year ago
Thank you for the clear instructions Frederick and thank you Dev Team for the tool.
Elias Lima
· 1 year ago
Thank you a lot, Frederick. I've tried a lot of things before, none worked. I followed your instruction and it worked !!!
Gaby
· 1 year ago
Thanks Frederick231 !!! I had the the error 6 from itunes, did as you instructed and my 1st generation iPhone is working with 2.0 firm, unlock with a non-official carrier in South America. Everything works well: wi-fi, bluetooth, app store, unlock. BTW THANKS DEV TEAM !!!!!!!
nebeling
· 1 year ago
Thanks Frederick231, your instructions woke my iPhone to live again.
uchlee
· 1 year ago
Thanks alot, dev team.
cimekri, I couldn't figure out how to use the tool and your description helped me greatly. Thanks for sharing your experience.
kelly Hendricks
· 1 year ago
------------TO EVERYONE HAVING THE "BOUNCING," NOT LAUNCHING PROBLEM-----------
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem. please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
solution found on my blog listed below... Dev Team really doesn't need to respond to this one it's kind of silly... papi found out the funny way
jash
· 1 year ago
I already have done 4 phones... it works like a charm... if you want a more visual tutorial look at http://coachhowland.blogspot.com/2008/07/pwnage... i've posted images and a more detailed description of DFU which seems to be tripping a ton of kids up...
I see a lot of you are fretting over these phones like you've destroyed them... even the most ignorant moron can't "brick" an iphone anymore... everything is reversible save dropping it in the toilet... even that's reversible if you get a drunk enough genius.
Joostieke
· 1 year ago
IT WORKED AS YOU SAID IT WOULD !
Thanks EVERYONE !!!
BOB HOLCEPL
· 1 year ago
it is the OPTION button not the ALT button~~ wasted at least an hour on that
Rick
· 1 year ago
option == alt :P
xa4
· 1 year ago
Thanks Cimkery, after struggling last night to update my 1.1.4 I went to sleep and read your cristal clear instructions this morning. It worked like a charm!
kudos to the dev-team you've made a lot of people very happy here. Thanks for making it so easy for us.
now go and celebrate and give those sleep-depraved eyes som rest now :)
Can't wait to try mobileme push support now.
grtz from Belgium
clem
· 1 year ago
Got my first gen iPhone updated from 1.1.4 to 2.0 too after a couple tries. This is great! Thank you so much! The simple mode didn't work for me though, I had to use the expert mode to get rid of the 1600 and 1601 errors (both happened to me in two different runs).
bugfaceuk
· 1 year ago
Kudos, nice clear post. I am just going through the process right now and your steps helped me be certain I was doing the right things (I have to also say to dev-team, wonderful wonderful UI, insecurity about am I doing the right thing aside)...
DWags
· 1 year ago
I kept getting the DFU Failure notice but I knew that my phone was in DFU mode. So I just grabbed the .ipsw off the desktop and used the restore function. Worked like a charm!
gr.mon
· 1 year ago
Thanks from me also, but as we waited for the dummy proof version, why not just follow the onscreen instructions, works like a charme!
Big Up devteam!
Kevan
· 1 year ago
Thanks for your list of steps. I would have given up if they were not on here. Heaps of respect to the Team for creating this. My first gen iPhone had been unlocked with ZiPhone from Zibri. I have to say that ZiPhone has a far superior interface that didn't require DFU mode and all that jazz.
Such a shame that the various people who worked on unlocks etc couldn't stick together for the common good. I hope Zibri manages to create a new version of ZiPhone that works in the same way as the existing one does.
Thanks for all your work Dev Team.
Ralf
· 1 year ago
I did all steps you explained, but in the end the iPhones comes up with the message "SIM locked". What can I do?
Ralf
· 1 year ago
works no, in Expert Mode! Thanks!!
dh
· 1 year ago
why do you unplug your phone during the download in step 2? i would think that Pwnage tool would unlock the phone once this upgrade was installed? So, isn't the point to install the upgrade, then unlock the phone with the tool? Sorry, seems too "hacky" a process for me.
Kerem
· 1 year ago
Is there a way to change IMEI Number in the 2.0 Software?
My IMEI number blocked here in Turkey because i bought my phone from USA.
The new baseband is flashable i know it because it is already unclocked and Its a first gen iPhone (not a 3G).
All i wanna know is: Is there a tool out there to fake the imei number? (Like the feature in Stupid Ziphone)
Viktor
· 1 year ago
Thanks a lot mate. Worked perfectly! <3
Thoma Rai
· 1 year ago
THANK YOU DEV BLOG, You made my day...and it worked like a charm...
Marco
· 1 year ago
My pwnage experience was very similar. It went uneventful. Everything seems to work fine.
Much thanks to the dev team! Without your efforts, the "full" iPhone experience is limited only to the Apple-carrier followers.
Thanks for the info, but did you try it on Windows XP? anyone else??
gman4354-douchebag
· 1 year ago
THANKS GUYS EVERYTHING IS FINE :-)
VinScap
· 1 year ago
after i select iphone in the tool it cannot find the firmware bundle even though i upgraded to 2.0 last week. any ideas what to do next?
jon
· 1 year ago
Im using the one for windows. Where do I do the bootloader part? Is that after I pic the ipws?
gb
· 1 year ago
Thanks cimkery! those instructions really helped me; happy 2.0 user now :)
bodgejob
· 1 year ago
took me a while but finally got it working after reading through this a few times and trying various things. Had fun playing about with all the cool new stuff,
THANKS DEV TEAM, REALLY APPRECIATE IT!!' CAN'T WAIT FOR THE 2.0 APPS TO START ROLLING OUT.... OH HOW I WISH THERE WAS AN UNLOCK FOR 3G....
l0ser
· 1 year ago
I had the same setup. (1.1.4 via Ziphone.) Did the same as you until step 4. At step 5 my phone would not go into DFU. I paniced, pressed the restore button in iTunes, paniced again realizing what I had just done, in the middle of the upgrade i turned off the phones power (yes I am officially stupid). Now I am stuck with my iPhone in connect to iPhone mode and no restores will work. Is my iPhone screwed 4 ever? Any help would be appreciated. Any comments calling me a stupid loser are unnessary as I am well aware of this fact.
l0ser
· 1 year ago
Got it into DFU and started restoring with custom firmware. The pineapple appeared and I was very happy for a few minutes... Then came the error from iTunes and now it´s stuck with the pineapple and spinning loadbar thing.
l0ser
· 1 year ago
unknown error (1604), it´s the same every time...
Abráham - México
· 1 year ago
******IF PWNAGE TOOL JUST BOUNCES ON YOUR DOCK AND DOESN’T OPEN ******
Hey guys, I’ve been trying to make Pwnage Tool open on my Mac since yesterday but it wasn’t working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor 2. In Activity Monitor, from the top Drop Down choose “All Processes” 3. Double Click on Pwnage Tool 2.0 4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called “ps” 5. Highlight “ps” and at the top of the Activity Monitor click “Quit Process” 6. It will ask you if you are sure, Click “Okay” 7. At this point, (once the “ps” Process has quit) the bouncing Pwnage Tool will settle and OPEN!
I hope this helps! It worked on my computer as well as my friends’ and my boyfriends computers! Wish you luck, the Pwnage Tool is fucking awesome!
THANKS FOR THE TOOL DEV TEAM!!!!! Greetings from the Texas-Mexico Border! (Dev-Team consider posting this as “Update 7″ there are lots of people who are having trouble opening the Tool on their macs) GOOD LUCK!
vishruts
· 1 year ago
@ Cimkeri
Hi lucky dude i am unable to keep the phone in DFU mode and by mistake i have downloaded and installed the 2.0 version from the i tunes i have mac and downloaded and created a custom ipws but i dnt follow how to mount this new ipws to my iphone i am tensed can you mail me on vishrut.sanghvi@gmail.com or reply here .. please i beg of you and thanx in advance...
WRDinc
· 1 year ago
So I do this and it seems to work fine but then I put in a Tmobile SIM card and it doesnt work. What else should I be doing?
sebastianz
· 1 year ago
Hi. thanks for the info. I just updated to 2.0 myself. However, I cannot set up my EDGE as I can't find it under 'Network'.... Please assist. THanks.
Ed Danger
· 1 year ago
I have the same problem. I can't set up my EDGE. I am using Fido in Canada (do the EDGE settings show up with Rogers or any other provider?)
sebastianz
· 1 year ago
I am in South Africa, but the problem is when you go the Settings, Network, it should show EDGE at the bottom, however, since I updated my phone it does not show that any more.... Does anybody have a solution??
sebastianz
· 1 year ago
I am in South Africa, so it does not matter which provider you are with. Normally when you go to settings and then network you should the EDGE at the bottom. However, since I updated to 2.0 it does not exist any more. Does anyone have a solution???
Hi and thanks for this user guide. I get to step 7 and when the iphone (1G) restarts from the pineapple logo it goes back to being a locked iphone with a non approved SIM card. Any ideas.
Sami
· 1 year ago
I jailbroke,activated and unlocked my 1.1.1 iphone using ZiPhone. I have followed all the steps in creating the custom IPSW file using the Pwnage 2.0.1 software. I then enter the DFU mode sucessfully using the tool, quit Pwnage and then restore the iPhone using the custom IPSW file. Once restored, itunes says that the restore was succesful. Later iphone is not recognized in iTunes and my phone is in its original state - locked and unactivated. I dont understand where i went wrong.
sebastianz
· 1 year ago
When will you release the unlocking software for the iPhone 3G ???
Bill
· 1 year ago
I successfully created a new "custom" firmware file using Pwnage Tool 2.0.2 to use on my 1st gen iPhone. All went well and I am now using the latest Apple software update. Unlocked, jailbroke, and activated.
Is there any technical reason why someone else with a 1st gen iPhone could not bypass all the creation hoopla and simply use the restore file I created?
Louix
· 1 year ago
Nice one DevTeam!!!! :)
embarassed
· 1 year ago
I agree. Thank you. I downloaded it and used it and it worked flawlessly. I couldn't be happier.
Also, thank you for managing to surprise just about everyone in the world with this one. After all the bitching and the moaning from everyone on this blog, I kind of thought you might finish it and say tough luck to everyone and not release it. Kudos for not only living up to your exceeding hyped promises, but by unexpectedly releasing it sooner than I think anyone thought. Please don't let this experience and the people here keep you from working hard in the future. I have a feeling we've only seen the beginning of what the Devteam can do with the iPhone and I look forward to supporting you with whatever you do.
...now us iPhone 3G advocates are patiently waiting.
kanna
· 1 year ago
it's working i upgraded my 1.1.4 to 2.0, but Wi-Fi has some problems ny application unable to connect to internet, can any one help in this
BALA
· 1 year ago
hey
i don't know much about hacking side....please explain me how to use this tool, unlocking and jailbreak 2.0. i'm using windows OS. please........... thanks in advance bala.
bala
· 1 year ago
sorry, you're out of luck. pwnage 2.0 is a mac only application. windows might be coming but nobody knows when.
MegaEduX
· 1 year ago
2+2 words: You can't | Windows $uck$.
tommy232
· 1 year ago
Fuck U.....Mac $uck$
Billy Bob
· 1 year ago
fuck both of you Linux sucks! (don't know why, just had to say it)
I had this wifi earlier too in the 1.1.4. I changed from WEP to WPA and it worked fine. May be this should work for you too. Best of luck
BALA
· 1 year ago
hi shiva Please explain me how to unlock and jailbreak of 2.0 from my windows xp using this tool. thanks bala
Justsomeguy
· 1 year ago
WOW! Didn't I just see you asking earlier how to use this??? WOW you are dumb...
It's ONLY for MAC OS X!!! HAHAHA LOL
Windoze $uck$... once again!!!
tommy232
· 1 year ago
fuck u...your mom sucks
Billy Bob
· 1 year ago
your mom sucks and your dad swallows
me
· 1 year ago
what the fuck, we all suck
Jim
· 1 year ago
my ex sucked, real good, now she's my ex and she doesn't suck. that sucks.
Juan
· 1 year ago
You can't use this tool, because is only for MAC OSx
And...
Windows SUCKS!
macaz
· 1 year ago
wow Mac FINALLY has one thing over PC for like probably 48 hours or so max..... suck it up fan boys.... it wont last long! then you'll be back to owning a normal crappy unprestigues mac.... iPhone Rox were my xp.ipsw :)
Derek
· 1 year ago
sorry I just have to say this... you buy 3 pc's in the lifetime of a mac. Your never left behind in the latest software, it runs dumb Vista faster than a pc. It pretty much does everything better.
IT4u
· 1 year ago
DEV TEAM I CANNOT THANK YOU ENOUGH FOR UR PROGRAM BUT PLEASE POST A STEP BY STEP PROCEDURE WITH HOW WE CAN USE UR PROGRAM ...YOU TUBE OR ANYTHING LIKE THAT
PLEASE
THANK YOU
sam
· 1 year ago
.... They said a more official announcement tomorrow... if you need help or anything don't ask until tomorrow because im sure the last thing they want to do tonight is troubleshoot.
JohnD
· 1 year ago
Excellent work. What about a baseband unlock though, it would be great if we were able to use the iPhone 3G on T-Mobile as well, obviously without 3G support, but still...
mda
· 1 year ago
That is ironic, here in Germany (the home country of T-Mobile/German Telekom) everyone wants to use anything but T-Mobile. Here they have the exclusive iPhone distribution and the most expensive contracts on the market.
tk
· 1 year ago
It's all about having a choice.
macaz
· 1 year ago
Didn't know that.... in UK they have the worst coverage (though still 90% or somthing) and they are by far the cheapest of the mainstream contractors. I don't use them mind :)
Exidus
· 1 year ago
Doesn't that make even HAVING an Iphone 3G a little....fucking pointless.....?
kanna
· 1 year ago
here is the most useful boot loader package bl39.bin and bl46.bin
One thing it seems a few of you missed is that you have to restore the phone in itunes using the ispw file on your desktop. To do that hold down your option key while hitting the restore button.
Also, THERE IS NO WINDOWS SUPPORT YET!
Also, I would be happy to mirror the app as well if needed.
cgranier
· 1 year ago
Thanks... That option-restore trick saved me a lot of grief.
simplemind
· 1 year ago
Upgrade perfectly with iPhone 1.1.4 to 2.0. Many thanks.
But receive the alert in iTune 7.7
An update to the carrier settings for your iPhone is available. Would you like to install it now?
Answer yes but received the below. No harm made but some some inconvenience only. SIM card is not one that Apple expected
iTunes could not update the carier settings on your iPhone. An unknown error occurred (0xE8000001).
Aelver
· 1 year ago
Thanks for the info ... I just hit cancel.
st6n
· 1 year ago
i've got the same error till closed pwnagetool.app & itunes and reboot my iphone. Thanks dev-team!!!
jn
· 1 year ago
This message appears everything the iphone is connected to itune, does anyone know how to disable that? Thanks.
MJ
· 1 year ago
I also get this message every time. I suspect it might be because I have a fake carrier name that was configured from the command line back in fw 1.x days, and that has been carried through with the restoration of data from iTunes. I have not figured out how to remove this message. Only details I can find are here:
Of course, I have no such directory /Users/[Username]/Library/iTunes/iPhone Carrier Support/ so I don't know where it's failing.
jn
· 1 year ago
i think it's carrier dependent. it appears every time when i use tmobile sim and failed to update, but only in the first time when at&t sim was used.
MJ
· 1 year ago
Thanks for the info. I am using a T-Mobile USA SIM exclusively so far. I have an AT&T pre-paid SIM but haven't tried it yet with fw 2.0
jn
· 1 year ago
one trick in the US network is to set the carrier name to AT&T by changing the "unknown" in the info.plist to ATT_US. The file is located in /System/Library/Carrier Bundles/Unknown.bundle/
Erk
· 1 year ago
Many thanks guys.
All doubters should be ashamed of their behaviour over the last week!
One question though, when running this - I select iPhone and browse for the ipsw package, I have both iPhone1,1_2.0_5A345_Restore.ipsw & iPhone1,2_2.0_5A347_Restore.ipsw and the tool reports that they are both the wrong package. Running on PPC 10.5.4.
Thanks guys once again...
Evan Walsh
· 1 year ago
I get this error too. Weird.
oxidizer
· 1 year ago
And me.
Pete
· 1 year ago
Same for me.... wtf
Nabz
· 1 year ago
I haven't tried this myself yet...can't get my hands on a mac until tomorrow, but I think you guys are using the wrong version of the 2.0 firmware. There was a leaked version, and then Apple released the official version which you get through iTunes. They both have the exact same filename, but some of the files and overall file size are a bit different. I'm guessing u need to use the OFFICIAL firmware 2.0, which you can find here:
No... That error happens similarly when choosing the firmware 1.1.4 or more older version. Of course, firmware 1.1.4 is Apple OFFICIAL fw. oh god...
trout4u
· 1 year ago
Evan or Erk, did you guys figure this out yet? I am downloading the 2.0 5A347 right now. Thanks----
bash
· 1 year ago
me too, MBP 10.5.4
Lionman
· 1 year ago
Make sure you get the correct version, not the early released one that came back before Apple officially released it. Then you have to remember to remove the .zip at the end and keep it as a .ipsw - The icon will change to a little package box. ;)
Tony
· 1 year ago
If you're on a an iphone 2g you need the iPhone1,1_2.0_5A347_Restore.ipsw
It looks like your 5A347 is the iphone 3G version.
ed mac
· 1 year ago
I have the same message 2008-07-19 22:01:32 - Loaded .ipsw file from '/Users/apple/Desktop/iPhone1,2_2.0_5A347_Restore.ipsw'. 2008-07-19 22:01:50 - Can't recognize .ipsw file.
igor
· 1 year ago
you need to to use iPhone1,1_2.0_5A347_Restore.ipsw
Ive made the ipsw in the imple mode...put my iPhone (2G) in DFU but when i wanted to restore in Itunes im getting a 1600 error!! Any help?
Foodie Monster
· 1 year ago
As I said in another reply, I had the same problem when I put ,y 2G iPhone into DFU. However, if you put it into plain Recovery mode (the one where it shows the iTunes logo and the sync cable), it'll restore just fine.
Give that a go, it worked for me. :)
Chris
· 1 year ago
From the website: Update 3: If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool.
zoohair
· 1 year ago
hey, i keep getting this in my log:
2008-07-19 19:39:34 - Failed to prepare x12220000_4_Recovery.ipsw file.
and i get a U FAIL , get a zune picture .... any idea on what to do?
zoohair
· 1 year ago
oh and i get a Failed to enter DFU mode
DarthSerial
· 1 year ago
me to... do you have an iphone 3g too?
zoohair
· 1 year ago
nvm i figured it out... i feel stupid now...
DarthSerial
· 1 year ago
tell me pls, what you figured out?
zoohair
· 1 year ago
nvm i figured it out... i feel stupid now...
para
· 1 year ago
can you tell the rest of us? i have the same problem
zoohair
· 1 year ago
oh nvm, i thought what it meant by DFU is to actually put my 3G into DFU mode but i guess that didnt work since i got the same error, damn..... anyone? help?
zoohair
· 1 year ago
anyone?
Neo
· 1 year ago
Noone out there? Got the same problem with my old iPhone 2.5G
Thanks
blek
· 1 year ago
Same problem here.
blek
· 1 year ago
Oh and the error message is Failed to prepare x12220000_4_Recovery.ipsw file. - iPhone 1st gen
same
· 1 year ago
I'm having the same problem. Any ideas? The only thing I can think of is after reading all these comments I used the 1.2 firmware incorrectly on my phone. Does it fix it if I put 1.1 on my phone BEFORE trying to pwn?
BlackWolf
· 1 year ago
I had the same problem but it's pretty simple: PwnageTool 2.0 attempts to guide you into getting into DFU mode. The first step you have to do is "connect your device to the USB port". But if your iphone is already connected PwnageTool thinks something went wrong and gives you a "failed to enter DFU mode" error. So try running PwnageTool with an UNCONNECTED iPhone and it will work. But it doesn't really matter anyway. You can just put your iPhone into dfu mode, close pwnage tool and restore using the custom firmware - that's exactly what pwnageTool wants you to do.
GoofyNZ
· 1 year ago
Great advise, worked a charm!!!!!! Thank you, and thank you Dev Team
sage
· 1 year ago
I'm getting the same error on a 3G iphone, tried it both in recovery mode and just turned on.
Error:
Failed to prepare x12220000_4_Recovery.ipsw file.
vveb
· 1 year ago
has anyone figured out what to do to not get the FAILED TO ENTER DFU MODE????
vveb
· 1 year ago
here's what I get... <img src="http://www.faithdrive.com/failed_dfu.jpg" />
diode
· 1 year ago
Once it's made the custom image, and you've been told you're a failure, quit Pwnage, put your phone into recovery mode, launch itunes, option click restore, select the ipsw on your desktop and restore. The rest is automatic on the phone. YOu won't need to go back into Pwnage.
Wicked stuff.
orvtech
· 1 year ago
On OSX how do you tell itunes what firmware to use ?
huanix
· 1 year ago
Hold the "Alt" key down when you click "Restore" and it will give you a file browser. (It might be the apple key - i'm using a generic keyboard)
BTW - I'm not able to restore the custom image in iTunes - error (6)
vveb
· 1 year ago
I finally got it to work... their update 3 in the post about the files in the Device Support worked like a charm... just re-ran the pwned tool and it worked. THANK YOU DEV TEAM!!!
Yeti
· 1 year ago
could you tell us exactly what you did with the device support folder?
My Library/iTunes/ folder didn't even have "Device Support" in there...
tj
· 1 year ago
I've got this error too ... no luck getting around it yet.
tj
· 1 year ago
If you're getting the error 6, the key is to have the iPhone in DFU mode (follow the instructions iPwn app gives ... took me a few tries to get it into that mode). Once in DFU mode, use iTunes to restore with the custom firmware.
fotrino
· 1 year ago
im getting the same error!
huanix
· 1 year ago
Creating the additional directory suggested by update 3 allowed Pwnage to upload the crafted firmware. Two hours after release, I am now ready to say - thanks for your hard work. I sincerely appreciate it. -hb
mikeybotz
· 1 year ago
same here
orvtech
· 1 year ago
Thank you.
The program was for some reazon jumping the screen where it forced me to get in to DFU mode. i solved by restarting my MBP without the iPhone pluged.
ran the application and carefully clicked next each time.. making sure to avoid double clicks.
oh! and i also ran mkdir ~/Library/iTunes/Device\ Support
since i didnt had that folder
im not restoring using itunes.
:D
trout4u
· 1 year ago
Could you tell me how to put my phone into recovery mode? I am really trying this
huanix
· 1 year ago
you have to create an additional directory ... read update #3 to the primary post: Update 3: If you get Error 1600 from iTunes, try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool.
I had to do this a little round-about, but you get the idea.
valle
· 1 year ago
I finally got passed the error 1600 using the update 3. When the DFU programing was ready the iPhone is now in a loop mode.
I see the pineapple for about 7 seconds and then the phone reboots, show the pineapple for 7 seconds and the is repeats it self.
I can't get it out of the loop, tried getting in to the DFU and Restore mode but it fails as the phone reboots all the time.
Acctually I did manage to go to the "Russian"? dude which I belive is a restore mode and tried to reflash the custom firmware but now I am stuck...
Really need ideeas as how to proceed.
Derek Lau
· 1 year ago
Valle, you're not the only one mate! I'm having the exact same problem, rebooting cycles.
D
valle
· 1 year ago
Update: I managed to get into DFU mode and did a recovery back to original Apple firmware.
trout4u
· 1 year ago
Can someone please help me? I Think I just bricked my phone. I Tried to restore my phone through itunes and now everytime I plug it in, I dont have a option to restore. I have downloaded both the iphone custom restore and the bootloader. Can someone who has some time please try and help? I will pay you 30 dollars via pay pal NOW if you ca. My email is balkersteven@mac.com. I have gone all through the "instruction" sheet and no luck. I dont even get the red "Cant find bootloader" pages, it just go's right into "creatting..." for me. Thanks
jash
· 1 year ago
Did you figure it out? I can help I was in that situation before... I had this problem
Your phone failed at the update... (you probably pwned your phone a couple times) All you need to do is get it to restore one more time, and pwnage will take care of the rest. If you can't get it to restore then you aren't putting it into DFU mode correctly, it takes a few tries for me and I've done this on 50 phones. But really! Don't fret, it's all reversable, don't pay someone 30 dollars... just be patient and it will all work out.
Try to restore it ONE MORE TIME... connect your phone to itunes... hold the power button and the home button until it turns BLACK then let go of the power button RIGHT AWAY (hint: if you let the pineapple pop up one more time you have to start all over) the screen should remain black connected to the computer and after about 15 seconds iTunes will recognize it as an iphone that needs to be restored... THEN RESTORE IT WITH OFFICIAL APPLE FIRMWARE and start all over again with the pwnage tool...
how did you do that? I cannot recover it to 1.1.4 or 2.0, could you tell me how you did it?
Derek.
valle
· 1 year ago
@Derek
I used the DFU
When the pineapple show, press and hold down both HOME and POWER ON/OFF button until the screen goes black, keep them pressed down for 2 more seconds and then release the POWER button only while holding down the HOME button for 10 more seconds. iTunes will detect the phone i DFU mode and you have the option to restore to the original firmware og your choice.
jin
· 1 year ago
did pwnage work for you? I got the pineapple loop just like you on my first try. went back to windows and restored my messed up iphone to 2.0 everything is locked. I tried again for the second time, another pineapple loop.
Derek Lau
· 1 year ago
nope pineapple loop again. i believe my phone is screwed. I can only put it on firmware 2.0 apple locked!! something is wrong.
Derek
Ross
· 1 year ago
Im having the same problem, if I use DFU mode or recovery mode and restore to the custom firmware it updates it but then the phone just keeps restarting every 10 or so secs. I can restore it back to the official 2.0 firmware and start again but it just keeps looping. Can anyone help?
iplay
· 1 year ago
Please some inf. when restore the iphone look fine but it keeps restarting over and over. Some help??
Derek Lau
· 1 year ago
I believe old users who used ziphone could have problems with pwnage tool. It's just my notion. Downgrading as we speak. It's not worth all this hassle.
Derek.
valleValle
· 1 year ago
Derek, I am on Iphone 3G so I dont think it is ziphone that makes the loop.
However I tried the following:
I downloaded a prebuild iPhone 3G ipsw file from piratebay and used the DFU to restore. I DID NOT go into loop and booted up. All is fine EXCEPT I get no carrier so it is like an iphone Touch :(
So I am not sure what the difference between my own build and the downloaded build is.
I am still trying to figure it out :)
iPlay-Dog
· 1 year ago
Helppppp Please thats realy painful
Danny
· 1 year ago
I had the same problem. Went back to 1.1.4 (this is a bit tricky, there are online manuals for this, you need iBrickr to get phone out of restore mode after the downgrade) then only did the pwn for 1.1.4 (no new ipws install). Then downloaded this ipsw: http://rapidshare.de/files/40034466/iPhone1_1_2... Restored in normal restore mode (no need for DFU) et voila!
Anthony
· 1 year ago
I finally got it to work on my ipod touch. After errors (6) then followed by 1600 First DFU is not the itunes logo + usb. DFU mode shows nothing.
But iTunes will recognize it. I connected my iPod in DFU mode. I removed the steps listed in update 3. **Make sure you do it in your OWN USER directory, not only the system directory!!
Then it was smooth sailings, i didn't get the U FAIL image again. and instead got the step by step from Pwnagetool.
Thankyou dev team! aim is sgtconfig if you have questions.
Marc
· 1 year ago
What happens when u put your itouch in dfu mode? How do u know its in dfu mode?
Anthony
· 1 year ago
When i put my itouch in dfu, the screen is black. nothing is suppose to be on the screen, nor should it be powered on. iTunes will recognize it in recovery mode.
to get to dfu. from your home screen. hold down power + home for 7-9 seconds. then let go of just the power and keep pressing home.
nothing should happen, besides iTunes popping up.
Javier
· 1 year ago
My situation is very similar, but after the upgrade (the pinapple on screen when reboot) what should I do???? If i connect it to itunes it sais that the sim is not valid
Lucas
· 1 year ago
Same problem... I don't know what to do !!
Lucas
· 1 year ago
I just forgot that I wasn't a legit user... Now it works =)
Ug
· 1 year ago
I had to manually create the folders as the mkdir “~/Library/iTunes/Device Support” terminal command got me nowhere. Worked great afterwards.
tuck
· 1 year ago
where do i create these files on my macbook or ssh into my ipod and put them in there
Anthony
· 1 year ago
you use terminal and type that. or you just go to Macintosh HD, Users, your usrname, Library, iTunes. and make dir.
Derek Lau
· 1 year ago
I have done all this and my iphone is still flashing the pineapple sign. I don't get any errors, but my iphone just decides to constantly restart. Why is this happening?
Derek
moooo
· 1 year ago
i have the same problem
PlayingKarrde
· 1 year ago
I'm in the same boat. I've done it a lot of times now and the same issue.
Joshua
· 1 year ago
me 2...tried a hundred of times now..
noobatron hackzoarer
· 1 year ago
how do you do update number three please it doesnt make any sense to me any help i just keep getting error 6
macgeek800
· 1 year ago
Having the same errors, I renamed the restore file the same name as the old iphone restore file, lets see what happens
If it doesn't take your ipsw-File you are using the wrong firmware. Take iPhone1,1_2.0_5A347_Restore.ipsw
brumaru
· 1 year ago
I have download iPhone1,1_2.0_5A347_Restore.ipsw and is not working... is says 'wrong firmware bundle selected'. Should I update on itunes first with the official 2.0 firmware? I read @ http://gizmodo.com/5023760/download-20-firmware... that unlocked phones get bricked. My phone is unlocked and it has 1,1.4(4a102).
speedy523
· 1 year ago
i just hit download 2.0 in iTunes and used the one iTunes downloaded with PWNAGE. And here i am, PWN'D 2.0 running appstore and cydia with Super Monkey Ball, Crash Bandicoot, Pandora and many other apps with no slow downs or problems. And im on T-Mobile :)
trout4u
· 1 year ago
Speedy523, can you please help me do this. I will pay you if you can. I have been sitting here trying to do this over and over again, no luck I am not that smart when it comes to computers but do take direction well. PLEASE HELP!!!!!! My email is chaffer3@me.com.
Thanks
speedy523
· 1 year ago
hey trout4u, i just emailed you, if you still need help just email me back and ill be glad to help you :)
macchoudhry
· 1 year ago
Hi speedy523 :-) Could you maybe possibly provide the solution to me as well? I would be most grateful. I have T-Mobile and have my 1st Gen iPhone on 2.0. It hasnt been pwned or anything. Just wondering what the best would be to have it work on T-mobile and also be able to use EDGE on T-Mobile.
Thank you so much :-)
r m
· 1 year ago
I had the same problem. The ipsw was in the same directory as the tool but the tool kept saying the file was wrong. I simple restarted the tool and it worked OK.
kanna
· 1 year ago
here you go for boot loader files bl39.bin and bl46.bin
Ultra cool! Im hoping 2.0 will fix my greyed out wifi too!
matthew
· 1 year ago
<3 you
kristyn
· 1 year ago
yayyyyyy! <3 you guys!
Lord Spesh
· 1 year ago
Thank you
purerich :)
· 1 year ago
merci
Evan Walsh
· 1 year ago
Thank you so much. So so so much.
jay
· 1 year ago
THANKYOU! THANKYOU!
iAnn
· 1 year ago
THANK YOU !!!! :D :D :D :D :D :D
strongesthylian
· 1 year ago
Downloading right now. Thank you Dev Team!
Steve from Long Island
· 1 year ago
Oh yes! I love you so much guys!!!
RooDBwoY
· 1 year ago
AWESOME WORK PEOPLE! Been waiting for a long time for this and love that you do it for nothing. BIG respect.
kyzser
· 1 year ago
Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you
Scarab
· 1 year ago
Thanks!!! Glad to be one of the first to be using it. Hopefully worth the (very short) wait.
Atilla76
· 1 year ago
Ya guyz
Thank you thank you Thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you.
Seat belts are tightened!!!
alex
· 1 year ago
can´t wait anymore :D
sam
· 1 year ago
amazing.
pbdude
· 1 year ago
Mad Ups Dev Team..... You make having an iphone so much better!!!
colinashe
· 1 year ago
y'all are great - thanks very much for your hard work :D
Silv0r
· 1 year ago
I fuckin' love you guys! :) Thanks to the DEV-Team.
Yours Sincerly,
Silv0r <3
looopz
· 1 year ago
Thank you!
AppreciativeUser
· 1 year ago
THANK YOU ;-)
Scott
· 1 year ago
Thanks guys! Awesome
Stephan Jansen
· 1 year ago
Thank u guys!!!!!
baklap
· 1 year ago
Yeah Baby Yeah, booting my Hackint0sh.
Love and Peace for all your members Dev Team, get some rest and enjoy your day.
trout4u
· 1 year ago
Yes to that, I wish I could buy and send you guys a KEG, although American beer probably wouldn't do it for you.
trout4u
· 1 year ago
You guys just plain out RRRROOOCCCKKK!!!!!!!! THANK YOU FROM SEATTLE WASHINGTON!!!!!! Its a zip. How does a computer idiot open a zip on a MAC???
noone
· 1 year ago
Double click it :D
trout4u
· 1 year ago
I just lost my download connection
trout4u
· 1 year ago
All Safari said is that it cant open the page> Whats going on???
PhatMikey
· 1 year ago
Dude, if you can't open a zip file, you probably shouldn't be using Pwnage Tool. Get your friendly neighbourhood geek to do it for you.
trout4u
· 1 year ago
I know how to open a God damn zip file, but I cant get it to work at all. I have the boot loader and the firmware . what do I do?
Lane
· 1 year ago
you don't open the .zip file, you remove the .zip extension from the file so it ends in .ipsw, the icon should change to a lego looking package icon.
Faslane
Bob
· 1 year ago
Thanks alot guys! :D
Federico
· 1 year ago
From Rome, Italy... Thanks guys!!!! :)
owecK
· 1 year ago
hey! will try it now guys...:) Thanks alot!!
owecK
· 1 year ago
WORKSWORKSWORKS WORKSS:..YEAAHH....GREAT STUFF FORM DEVS...MANY THANX FROM CZECH
P.
· 1 year ago
YYYEEEEEEEEEEEEEEEEEEEESSSSSSSSS!!! THANK YOU!!
colinashe
· 1 year ago
also: might bittorrent distribution be a good idea?
BHSPitMonkey
· 1 year ago
Free at last!
BK
· 1 year ago
Sweet. Nice one guys.
blix
· 1 year ago
Thanks!
gen4
· 1 year ago
Thx from Poland!
everaldo
· 1 year ago
thanks again!!!!
spooky
· 1 year ago
Nice =) Big Thx
daphreex
· 1 year ago
Thank you so much, i'am so excited to see your hard work!
THX THX THXX
Roger
· 1 year ago
I appreciate your work, and send my thanks.
RadicalE
· 1 year ago
Yay! Thank you Dev Team!
You guys are the best.
Stephen Baugh
· 1 year ago
Thanks Guys
You are so cool, and have my total appreciation and respect.
Cheers TUI
timro
· 1 year ago
Thank you so much, we all really appreciate it! Kick back and enjoy the weekend, you guys more than deserve it!!!!!!
Panix
· 1 year ago
Thank you so much guys!
oxidizer
· 1 year ago
Thank you very much!
johannnn
· 1 year ago
I looooooovve you!!! <3 you're simply th3 best!
Leans_To_Center
· 1 year ago
8 days, fantastic going guys! Great way to start the day in Australia. All the best from Sydney!
Cleaner
· 1 year ago
PS ... happy birhtday
euromusic
· 1 year ago
thanks :-P
tarun
· 1 year ago
infinite and sincere thanks
realindoor
· 1 year ago
I'm so f****n happy
pr0nstar
· 1 year ago
we will, WE WILL! :)
Belga
· 1 year ago
Champagne for EVERYONE
thanks Dev Team !
birthdayboy
· 1 year ago
thaks, its my birthday this week
euromusic
· 1 year ago
its my birthday today juli 20 here in Belgium
roei
· 1 year ago
תודה גם מישראל
thank you from Israel
sitaraa
· 1 year ago
thanks iphone-dev... is this going to work on a pc?
Harman
· 1 year ago
Make a windows version now!
cmw sucks balls.
blairpod
· 1 year ago
IDK about "sucks balls", but a win ver would be amazing!
Geohotz
· 1 year ago
Seriously! I hope the Windows Version is out by Monday! What about the 90% of computer users that use windows?
someone please upload to rapidshare, links down :(
THANKS DEV-Team!!!
GoofyNZ
· 1 year ago
Dear Dev Team, Thank you very much! Baie dankie! Ka pai!
Jorge Andrés Marín Lora
· 1 year ago
Please another server for download....
John Hebert
· 1 year ago
Trying to fight the 8 billion other people for download...speed...so...slow....
THX GUYS!
oracle rabbit
· 1 year ago
somebody post a mirror.. please .
Markus
· 1 year ago
Thank you!
iSeb
· 1 year ago
Many thanks from Sweden
PéO
· 1 year ago
Gros merci du Quebec... Big Thanks from Quebec
Steve from Long Island
· 1 year ago
Hey but.. any feedback? Does it work?? (ahahaha just kidding i'm sure it does ;) )
Atilla76
· 1 year ago
Good question: I am a tmobile customer in Colorado. I had to reset my gmail account, and you may have to reset your email as well. But most importantly, I did download remote from the app store!!!! And yes it works. I am in the process of setting up the rest of this. Not sure about Cydia as yet. Safari works, phone works, sync works, email now works. Apptap, no luck in the build process:not available not supported. Right now cydia is stuck, maybe the sources that I added are not compatable with cydia???
Reimar
· 1 year ago
How did you reset your gmail account? I can't get it to work. I am getting an error message in iTunes saying that it was not possible to sync my email account because the iPhone cancelled it. When I try to open Mail on the iPhone it just closes and I can't delete my account on the iPhone or change the settings either. Any solutions?
thomas
· 1 year ago
same problem here
Chomby
· 1 year ago
if you dont want to set up your phone as new device to get the mail app working you can simply install terminal via cydia, type login, then root, then alpine and then after it logs in type in rm -fR /private/var/mobile/Library/Mail exactly as spelt there and simply sync again with itunes and it will reload all your mail stuff. basically this just deletes mail folder and then reinstalls. but it works if you need more help email at chomby1991@gmail.com
thomas
· 1 year ago
thanks.
also figured out that it works again if you su chown -R mobile:mobile /private/var/mobile
Honza
· 1 year ago
+1
Nelly
· 1 year ago
Thank you sooooo much Brendon Cathcart, you're solution worked perfectly and to be honest its better then the Dev teams solution (they say to restore then set up as new phone, blah, blah, blah)
siliconmeadow
· 1 year ago
Thank you! Torrent! Torrent! Torrent!
bibi
· 1 year ago
Thanks dude :-)
Def Ker
· 1 year ago
Danke.
albenex
· 1 year ago
thank you =)
mmh server is busy.. why doesn't somebody (who downloaded the tool) share it in other mirrors?
well apparently your statistics are wrong because every mirror that goes up dies!, if only 6.3% uses macs, then there must be a lot of windows users downloading it for nothing.
macaz
· 1 year ago
im on windows and d/l to take to my mates Mac on a memory stick. A lot of people are 'panic buying' like I did I'm sure!
Sunlis
· 1 year ago
90% of computer users have windows. But MANY of the iPhone enthusiasts are also Mac enthusiasts, or at least Mac owners. I'm pretty sure 100% of the computer-owning population world-wide is not trying to download this app.
thanks!!! You guys are awesome! Are you guys planning to unlock the 3G? oops..... broken link?!?!?!?!?!?!
b
· 1 year ago
thnx but only 4 mac... windows users must still waiting....
Simon
· 1 year ago
...and they shall for ever walk among the giants
Ignore the selfish ones,we all thank you
FlorianG
· 1 year ago
Wow, Thank you very much, and I'd like to apologize on behalf of everyone who cursed at you and insulted you in the last few days, we all really appreciate the work you've done!
nbvikingsidiot001
· 1 year ago
Oh my God!!!!!!! I just went out to dinner Son of bitch
Careful man. I hope it's not illegal to post direct links to torrents here.
haibane
· 1 year ago
you know torrents aren't illegal if used properly
dsfg
· 1 year ago
I'l throw up a torrent link after I have it downloaded.
Will post here shortly. Suggest everyone else that has downloaded jump on the same torrent to help seed.
Dtx
· 1 year ago
Anyone mirroring this tool? servers down already.
Name
· 1 year ago
hang on... I'm putting it on rapidshare for you. Will post link in a min
Todd Sayer
· 1 year ago
OMG thanks sooo much dev team when i have downloaded and unlocked i will donate if there is a link ???? but please someone put it on mega upload !!!!!1
dev tyeam u rock and i hope u appreciate my donation u rock !!!!!!!!!!! to the max what would i do without u
Oh is this ever sweet, Thanks for all your hard work.
Sarah Parmenter
· 1 year ago
I'd just like to say thank you for your hard work, we're astounded that you guys do this for free. It worked first time for both me and my boyfriend, really great job, thank you so much.
GUYS SOMEONE POST A RAPIDSHARE LINK ... GUYS SOMEONE POST A RAPIDSHARE LINK ... GUYS SOMEONE POST A RAPIDSHARE LINK ... GUYS SOMEONE POST A RAPIDSHARE LINK ... GUYS SOMEONE POST A RAPIDSHARE LINK ...
MannyG
· 1 year ago
You guys are the fuckin shit!!!!!! FUCK GEOHOT, FUCK ZIBRI....YOU GUYS ARE THE REAL DEAL!!!
Adyh
· 1 year ago
Do you not think that the geohot post and website might just have been a little bit p**s-taking of zibri ?
OH my god......THANK YOU SO MUCH!!!!!!!!!!!! Yu guys are GREAT/ Fantastic/UNBELIEVABLE COOL!!!!!!!!!!!!!!
Zueski
· 1 year ago
OMG THANK YOU SOOOOOOOOOO MUCH!!!!!
Bodey
· 1 year ago
yes thanks does this work on windows
Rhys
· 1 year ago
No! It does work on Windows!
iShadow
· 1 year ago
Please.... mirorr it BTW - when will we see windows version?
mikelino 74
· 1 year ago
Thx from Austria!
Brett
· 1 year ago
Where can I get the ipsw for 2.x iphone 3g and non 3g ver?
Pqdbr
· 1 year ago
daphreex thank you for the mirror !!!!!!!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!! DEV TEAM I LOVE YOU !!!!!!!!!
Another video? This is it! You guys are the... oh, wait... Damn it.
yp
· 1 year ago
thanks! really God bless you
outcry
· 1 year ago
All I can say is WOOHOOOOOO!!!!!!! Thanks Dev Team!!! You kick ass!!!!!!
Raj
· 1 year ago
Thank you Dev Team, now only if i can be patient till it downloads :)
macchoudhry
· 1 year ago
Guys I'm wondering if anyone can help me I tried pwnage tool 2.0 worked like a charm! I am using a T-Mobile USA Sim. It has the $20.00 data plan. I can use the phone and the voicemail featuresbut not the edge $20.00 plan. I just put my sim in and it seems that it is using the AT&T settings for data, how do i change these settings to t-mobile settings? I can't SSH into the phone through an SFTP client :-( any help would be appreciated :-) Thank you so much to the Dev Team and all the great people in the comments section for being so helpful to the rest of us!
xpLosIve.
· 1 year ago
good job :)
Link2999
· 1 year ago
lol works perfectly. Also love the anti-windows approach :)
Joe
· 1 year ago
TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!! TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!! TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!!TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!! TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!! TOOL IS ONLY FOR MAC! MAC ONLY TOOL!!!!!!
damos
· 1 year ago
Spasibo, fellaz hustle harder! )
Sascha
· 1 year ago
Worked like a charm on the iPhone1! Thank you from Switzerland! 10 PRINT "THANK YOU! iphone-dev.org Jedi masters." 20 GOTO 10 RUN
Guys I'm recieving a message "No bootloader 3.9 found .. would you like to search the web for it ?"
I don't know what I'm supposed to do ... where should I put the file ?
buddabang
· 1 year ago
i'm getting this too... fantastic work though , its looking good, just need bootloader 3.9??
MegaEduX
· 1 year ago
Just dload it :p
Marcos from Brazil
· 1 year ago
Put it anywhere, download it to the desktop, for example. then check "don't look the internet" and after that browse to the desktop. Google it, it is already everywhere..or here: http://hackint0sh.org/forum/showthread.php?t=46377
ChrisM
· 1 year ago
Awesome work. Thank you guys!
IPod
· 1 year ago
Which one is for Window? Here or Mirror??
lumix
· 1 year ago
Thank you from Panama!!
bloodkill
· 1 year ago
PLEASE MAKE A WINDOWS VERISON!!!!!HOW HARD IS IT?PLZZZZ
Thanks for the mirror, just downloaded. but does anyone know if this will work on an original iphone that had the geohot hardware hack applied to it? I'm still on firmware 1.0.2
Axxo
· 1 year ago
I would like to know too... I'm also on firmware 1.0.2 but have no idea how it was jailbroken (since I didn't do it). So, anyone know if it has to be virginized first?
Thanks in advance!
MAKAVELI
· 1 year ago
omg wow thanks so much
JWSTigre
· 1 year ago
Did I forget to tell you. . . Thank you! JWSTigre
Carla
· 1 year ago
Thanks from Canada :-)
wolf bialon
· 1 year ago
Seems the downloaded file PWnageTool_2.0.zip cannot be unzipped (on macbook/leopard) - any idea what went wrong?
bash
· 1 year ago
redownload
MegaEduX
· 1 year ago
You got a broken file, re-download.
Wagner
· 1 year ago
Torrent seeding on piratebay...
jreb13
· 1 year ago
Is there anyway that someone can post a tutorial, I've never used pwnage tool before and would really love to know how this should properly be done.
So will ALL of the applications that are available in installer be available now in 2.0? I couldn't live without my Touchpad Pro...
wil
· 1 year ago
thank you so much devteam!
Homeless Freak
· 1 year ago
From the help file in the zip - 'Pwnage Tool is an application that automates and simplifies the new method of "Pwning" an iPhone or iPod Touch. Currently this application exists only for Mac OS X (10.4+).'
baklap
· 1 year ago
Works like a charm, updating my pwned firmware now, w00t. Thanks Dev Team ...
trout4u
· 1 year ago
Can someone email this posting and tell me if I am supposed to restore my phone to Apple specs and them download the new 2.0 from apple? It keeps telling me that there is no "FIRMWARE" bundle found.
Thank you---Seattle
J.P.
· 1 year ago
Thank You from Portugal!!
DarthSerial
· 1 year ago
I got an error when pwnagetool 2.0 try to pwn the iphone 3G. It says, that he can't build the restore.ipsw... can somebody proceed the same error?
i use a macbook pro with os x 10.5.4.
in the first version of the pwnagetool you can pwn your iphone seperatly from the IPSW-build-process. i miss this function... :-(
DarthSerial
· 1 year ago
the errormessage is: failed to prepare x12220000_4_Recovery.ipsw file. My iPhone is in recoverymode but the pwngetool can't pwn my iphone...
Hussain
· 1 year ago
are you serious ? did you try reading the actual post ?
"Update 3: If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool."
Thank you guys, i can finally use my iphone 2.5g with 2.0 in mexico :-) if you guys still accepted donations i'd be buying you all a round of beer.
Fresco
· 1 year ago
Amen, thank you!
Mike
· 1 year ago
When will you give us a Windows Version ??????
Plssss bring it :)
Kisai
· 1 year ago
Thanks love you *
Mundo
· 1 year ago
Where do you go from the "Browse .ipsw" page? HEEELPP
devnull
· 1 year ago
bin files at:
ftp://ftp.iphonefix.de/Pwnage/
javrojqu
· 1 year ago
thanks for this usesfully info...
javrojqu
· 1 year ago
thanks for this usesfully info...
jreb13
· 1 year ago
I see people saying that they've successfully used it would they be kind enough to help us out by posting a quick little run down of what they did?
BetweenBlue
· 1 year ago
Thank you so much for your hard work! We all appreciate it more than you know.
Romero
· 1 year ago
FOR WINDOWS?¿?¿?¿¿:S:S
orson909
· 1 year ago
Guys! I feel with the moral obligation to donate some ££ to you. I believe you have done an amazing job. Not only in working so hard in getting this software ready, also in keeping all this very impatient bloggers at stand (including myself!)
If you have an paypal account I will be more than happy in pass you my spare change.
Again, thank you for such incredible job.
youyou75
· 1 year ago
Thanks a lot. you festivities a remarkable travail.Bon courrage and good continuation. I hope that this is translated
LivnLuvnit
· 1 year ago
IT IS POSSIBLE TO USE IT FOR FOR WINDOWS VISTA???????????
Chad Johnson
· 1 year ago
Yes...
bty running Mac OS X in VMware.
sbsb
· 1 year ago
England calling.....
Very many thanks.... Upgraded successfully - worked like a charm..
Very well done - you now deserve a break...
Rgds
Ste /UK
· 1 year ago
... after creating the unlock part for the iphone 3G :oP... then have a break... ;o)
Thanks a lot guys but when do we get the Windows version ?? :( :( Please somebody answer.....
tomcairns1
· 1 year ago
do u need itunes 7.6???
MKA
· 1 year ago
Thanks so much guys! Its building my IPSW now...nervous to see what happens!!!!
jreb13
· 1 year ago
Where are you getting the 2.0 firmware from to build the ipsw? And does the iphone have to be restored to a fresh 1.1.4 or can this all be done while the phone is already jailbroken?
http://dustincimino.com
· 1 year ago
Now...I just have to wait for a windows release hope it comes quick.
WilliamTM
· 1 year ago
Another couple mirrors if anyone wants / needs them:
When it asks if i'am a legit user i assume it's asking if i have a regular contract if any official carrier, am i right? And just to be sure: I used the pwnage 1.1 tool to unlock my iphone but i don't have the pineapple logo , i know this is stupid but just to be sure, i sould say "yes"right? Thanks
zebrum
· 1 year ago
exactly. choose you are not a legit user if you need activated.
wartus
· 1 year ago
you guys rock !
WindowsUser
· 1 year ago
wait...theres some rumors going around..that all pwnage does is create custom firmwares...is this true? so do you NEED to pwn it? can window users use it just by getting custom firmware?
feZz
· 1 year ago
I wanna know the exactly same fucking thing
demuredemeanor
· 1 year ago
i do believe that it modifies the firmware file, but legally you can't distribute the modified firmware, which is why things like, and psp custom firmwares, use the original file and modify it.
pumpkin
· 1 year ago
there's no longer a separate pwning step... all you need is the ipsw (and pwnage tool makes a couple of changes to itunes support files on your computer, too, so itunes doesn't interfere with the magic)
Wyseman
· 1 year ago
Worked first try for me. Space invaders was great too.. Thanks to all.
ddietz11
· 1 year ago
pumpkin, I'm the owner of http://www.herefordhosting.com. I created my homepage to update when you guys update the blog. But, I've also been hosting the Pwnage Tool 2.0 and now 2.0.1 for others to download. To date, I've nearly had 199,000 people use my website to watch for updates and download the Tools. I would really like to be able to 'officially' mirror your releases in the future. ANY announcements or releases you want to get out there, I'll gladly post them on my server as well! My server is able to withstand high-traffic and download volumes without issue. I hope to see my site listed as an 'official mirror link' in your blogs!!! ddietz11
Same here no matter what I try iTunes gives error (6) straight after uncompressing the firmware.
I had already installed v2 firmware before which didn't work of course :)
adam
· 1 year ago
I got the exact same issue. Does itunes log anywhere on the MAC? got Iphone 3g with actually fw345 trying to put modified 347. Patch by pwn is ok, the ipsw file is generated, but pwn give error "Fail to enter DFU mode" even if im in DFU (USB+itunes icon). I tried to put the ipsw file with itunes, it extract and fail with unknown error 6. Ill try to transfer the .ipsw file to a windows box to try to restore with itunes.
adam
· 1 year ago
I got the exact same issue. Does itunes log anywhere on the MAC? got Iphone 3g with actually fw345 trying to put modified 347. Patch by pwn is ok, the ipsw file is generated, but pwn give error "Fail to enter DFU mode" even if im in DFU (USB+itunes icon). I tried to put the ipsw file with itunes, it extract and fail with unknown error 6. Ill try to transfer the .ipsw file to a windows box to try to restore with itunes.
vveb
· 1 year ago
having same problem ...what to do to get past FAIL TO ENTER DFU MODE???
adam
· 1 year ago
badly it is the same trying to flash the .ipsw file with a windows box. And phone dont want to do a normal boot now it seems ...... :-(
philter
· 1 year ago
im having same problem! :(
adam
· 1 year ago
ok. now its currently restoring the custom firmware. In fact itunes+USB logo is NOT DFU, the real DFU dont display anything. I followed step from here : http://www.iphonepassion.com/2008/03/19/safety-...
And this fail with error 1602 :-((
Hoping not have bricked the phone. Will retry with the pwn on mac instead of the .ipsw file on windows box
adam
· 1 year ago
Ok. now with the mkdir made, and correct DFU mode activated it flash. I just rebooted and it seems to work. ill verify fonctionnalities now.
None
· 1 year ago
It's called Console. Spotlight it...
scigo
· 1 year ago
thank you very much from slovakian in the UK, please add version for windows
Sidius
· 1 year ago
Cool, I now have the silver PWNAGEapple on my iPhone. The App is a charm! Excellent work!!!
jeevan
· 1 year ago
Thanks a lot from Munich!!!
edmas
· 1 year ago
You also can download it here : edmas.org/PwnageTool.zip enjoy
chong
· 1 year ago
Sorry but Installer.app support is not implemented.
why i get this?
Matthrix
· 1 year ago
yes exactly the same thing !! i don't want Cydia ! i want installer.app !!! please tell us how we can change that ?
THANK YOU and CONGRATULATIONS for your work !
Ryan
· 1 year ago
I'm not familiar with how to use cydia. So far the only program I recognize to download was chromium notes. Can I add more sources? Where are all of the games from installer?
Thanks
bloodkill
· 1 year ago
AT LEAST TELL US IF THERE IS GONNA BE A WINDOWS VERISON>>HOW LONG DUE U THINK ITS GONNA BE??PLZ ANSWER!!!!!
xMop
· 1 year ago
Shut up and get a mac.
rafa
· 1 year ago
Can u put it on Windows Xp!would appreciate it!
Notorious Thug87
· 1 year ago
NOOOOOO!!!!!! Im on windows!!!!!!!When will it be released for windows???????
Damon Devitt
· 1 year ago
get a mac !!! MAC IS DA FUTURE BILL GATES DESERVES TO DI3!!!!
Patrick Lutz
· 1 year ago
Good job, guys! Can't wait for the Windows version! :D
realindoor
· 1 year ago
itunes says: error 1600 WTF?
Foodie Monster
· 1 year ago
I got the same error when I put the iPhone in DFU mode. However, when I put it into plain Recovery mode (that shows the itunes + sync cable on the screen), the restoring worked flawlessly. Give that a go, and see what happens. Good luck!
"no firmware bundle found" message after i select my iphone, i dled the latest 2,0 .ipsw file and when i do the "select file" from expert mode it says "wrong firmware bundle selected" wtf
Scroll down towards the bottom. Grab both 3.9 and 4.6
bravenewcode
· 1 year ago
As a patient, quiet, and duly thankful user I want to congratulate you guys on your work and thank you sincerely for what you've offered the iPhone community.
Pascal
· 1 year ago
It was worth the wait! I just pwned my first one, and it works great!!!!!
hwrevd1
· 1 year ago
Pascal, could you post a custom_restore of 1,1 2.0 pls
Clifton23
· 1 year ago
Well worth the wait!
Very clean, very easy to use piece of software!
You guys are > *
Thanks again!
realindoor
· 1 year ago
there is something wrong with itunes.. iphone id DFU restoring with custom firmware.. i keep getting ERROR 1600 !!! WHYYYYYY???????
Foodie Monster
· 1 year ago
I got the same error when I put the iPhone in DFU mode. However, when I put it into plain Recovery mode (that shows the itunes + sync cable on the screen), the restoring worked flawlessly. Give that a go, and see what happens. Good luck!
vveb
· 1 year ago
did you get it to work? how do you put it in plain recovery mode vs DFU mode?
Foodie Monster
· 1 year ago
Yup, it's working just fine at the moment. About Recovery, I did it sort of by accident, but for what it's worth this is what I did:
1) Plug in your Phone 2) Turn it off while plugged in. 3) Press and hold the Home button and then press and hold the power button. 4) After about 3-5 seconds, let go of the Power button but keep holding the home button. 5) Your screen should turn on and eventually show the iTunes logo
Hope that helps :)
vveb
· 1 year ago
I did what you said and its still telling me fail to enter DFU mode like its not recognizing it. Any thoughts?
Foodie Monster
· 1 year ago
If you are trying to use the Pwnage Tool then you have to be in DFU mode, not Recovery mode.
What I posted was to bypass the problem of getting the Error 1600 or Error 6 when Restoring the custom firmware to the already Pwned device.
vveb
· 1 year ago
what if your phone has never been pwned?
Tim
· 1 year ago
make device support in itunes so: ~/Library/iTunes/Device Support. then try the pwn process again and it should be able to put your iphone in dfu and u wont get error 6.
Gettzz
· 1 year ago
thanks for the advice but how is this done?
dave
· 1 year ago
your done with the pwnage tool close it and go into itunes and just upgrade by holding option and selecting the custom 2.0 firmware the pwnage tool created
oscar7romero
· 1 year ago
I sync my iphone to windows XP. Is it possible to unlock my iphone on my friends apple laptop & continue to use it on my PC. Someone told me that if I switch from apple to pc, it will force me to restore my iphone.
Argon2000
· 1 year ago
Seems like bullshit to me... No problems with my Ipod Touch to jailbreak on mac and use on PC atleast..
oscar7romero
· 1 year ago
Thanks man.
Foodie Monster
· 1 year ago
You can use your friend's Mac to use Pwnage Tools. What will happen is that it'll delete everything off your iPhone/iPod Touch, and proceed to unlock and all that. After that, just go to your PC and resync it with your usual iTunes. It'll work.
Thank you, you did a great work and a lot of respect for you - who offer your work for free and the pleasure of doing it. Even if it is only an updated iphone, but some posters let me think, theres nothing in their life except of an iphone. But it is important, it's also a statement against the greediness and the power of big companies. If all of the downloaders do also at least one thing as a gift for another.......... :-)
the_doctor
· 1 year ago
A big Thank You. I bet you won't hear the thank you from the haters but the majority of us say a big big thank you.
trying to use this with an original iPhone... App asks for ipsw file...so i point it to the iPhone1,2_2.0_5A347_Restore.ipsw file on my desktop but it says it is the wrong firmware?? This is the same ipsw file that is running on the handset now.. Any thoughts?
quirky
· 1 year ago
I believe you need iPhone1,1_2.0_5A347_Restore.ipsw
If you restore through iTunes, then the firmware will be under ~/userfolder/Library/iTunes/iPhone Software Updates/
Nabz
· 1 year ago
I haven't tried this myself yet...can't get my hands on a mac until tomorrow, but I think you are using the wrong version of the 2.0 firmware. There was a leaked version, and then Apple released the official version which you get through iTunes. They both have the exact same filename, but some of the files and overall file size are a bit different. I'm guessing u need to use the OFFICIAL firmware 2.0, which you can find here:
i restored mine in itunes, it downloaded the right one automatically, when its downloaded it and told you its the wrong sim , then do the PwnageTool !! ;o)
Hey guys, i got problems on 1st Gen iPhone, made 2.0 package & installed, got (2001) error 3 times then it worked. Now its on it still needs activated, any suggestions to: t11chb@gmail.com
Will the pc version be released any time soon? (You guys got my hopes up :( pc version plz....)
IT4u
· 1 year ago
HI
Please if somebody can make a movie and post on youtube with exact unlock procedure, just to make it clear.
Thanx
PS post a link with from youtube here for everybody
YOUTUBE-IT PLEASE , the whole thing from docking to last "enter"
Matt
· 1 year ago
WOW!!! Thank you so so so so so much guys. You have done an amazing job with this. I will show my pwned iPhone off with pride. =D Well done, have yourself a well deserved rest and let us all donate for some beers for the entire team!
Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac! Get a mac!
Ant
· 1 year ago
hahaha LOL
Richard Burns
· 1 year ago
Too fucking right, i'm an A+ engineer, worked with windows from 3.1 until now. Moving to mac was the best move ever, no spyware, viruses, no trying to find drivers, and if you love windows soooo much install it on your mac, christ it runs better on my MBP than on my Acer.
berian
· 1 year ago
amen dicky!
Mavster
· 1 year ago
Great Job guys! But does it work on a OSX Leopard? mfg Mavster
Words are not enough... a big thanks to all the dev-team.
piotrek
· 1 year ago
Thanks a lot guys, excellent work! :)
boki
· 1 year ago
thank you from Croatia... Now take a rest and when you feel ready come to Makarska, drinks are on me....
tdSkate
· 1 year ago
iDevTeam, you guys are simply GENIUSES. to anyone with iPhone 2G 1.1.4 who can't figure it out, here's how I started out:
First get the bootloader files... links can be found in other comments on this page. (BL-39.bin and BL-46.bin) Connect iphone to Mac > Click Restore button > ipsw file starts downloading > Disconnect iPhone while downloading > When downloading is done open PwnageTool 2.0 and follow instructions from there.
(I'm not done upon writing this comment, so i hope it works...)
Patrice
· 1 year ago
Thanks a lot !!
Zac Altman
· 1 year ago
Thank You soooooooo much!!!! 80% downloaded...
(Aussie here!) - woooooooo!
erik
· 1 year ago
Thank you! But it wouldn't activate. When finished it said connect to itunes. and then not valid sim.. why? Thanks
Richard Burns
· 1 year ago
Do it again, but do advanced and choose boot neuter and go thru other options, looks like that has fixed my problem
BiG RenaS
· 1 year ago
FUCK AND FOR WINDOWS WHERE IS?
Gustavo
· 1 year ago
Could you please be more polite with those who is doing a great job without asking you anything?
Niels
· 1 year ago
After these kind of messages I hope IT NEVER COMES TO THE PC.
ricardo
· 1 year ago
at the end of the process the iphone allows only emergency calls
realindoor
· 1 year ago
all rigth now seem to be working.. nice stuff, very nice GUI btw
aidan
· 1 year ago
How do u work it on windows
Adam
· 1 year ago
THANK YOU!!! BUT PLEASE PLEASE
PLEASE PLEASE PLEASE MAKE A PC VERSION!!!!!!
alfagta
· 1 year ago
No bootloader 3.9 found??? WTF??? What i'm supposed to do???
apathy96
· 1 year ago
Can a 3G iphone be downgraded? So that I can use it while i wait for the unlock to come out? Thanks in advance for the answer.
mr sheen
· 1 year ago
dev team would u please clarify that is software isnt for windows
scooba24
· 1 year ago
This application is currently for apple MAC not windows:
Now I am fully updated to 2.0 on my 1st gen iPhone - SWEEEET ...... thank you so much devs - awesome. The program was very easy to figure out - just had to find the files needed. But that was no trouble on the hackint0sh site. Everything seem to work perfectly :o)
I salute you !!
Barry Smyth
· 1 year ago
Fantastic! now I just need to get my grubby little hands on the 3G phone, no small accomplishment here in Singapore. Can't wait! You guys rock!!!
Doesn't seem to work with the iPhone (classic) selected. The 3G option finds and uses the 2.0 firmware build 347, but the classic iPhone option does not see build 347, and gives me an error if I try to select it. I'm downloading 345 right now.
Tamer M. Qandil
· 1 year ago
Thanks for the early release. I will try it and advise?
pl_svn
· 1 year ago
Thank you guys: for both Pwnage 2.0 and... for the fun you gave us while waiting! :-) :-) :-)
What are the required specs to launch it ? I've got an iMac G5 Tiger and I'm not able to launch the app...
meetmumu
· 1 year ago
my os is 10.4.11,and i cannot launch it too
gVes
· 1 year ago
i have 10.5.4 and i can't launch it either. i don't think they had time for us old PowerPc users...
Roger
· 1 year ago
I have dl'd and installed. I have pwn'd my iPhone 2.5 g, running 2.0 at the time.
No problems encountered. A little disappointed that Installer.app not supported (yet). However am well aware that the dev-team don't write that code. And that most of the old 1.*.* firmware a aren't compatible with 2.0 yet anyway.
Cydia installed, but same deal on apps other than system tools.
This will come, I am sure.
I use ATT, so didn't need to activate or BootNeuter. When running this set up, just click on Expert Mode. Deselect theboxes for activation and boot neuter. Then proceed.
I have the bootloader bin files on my computer in the same directory as the Pawnage App. But couldn't locate.
Ups to the dev team!
Josh
· 1 year ago
yep can;t launch either. launched fine right after downloading on my 10.4 G5, but only the first time. doesn't work at all on my 10.4 G4 :(
Hope this is just a minor bug that can get fixed soon...
habinho
· 1 year ago
iPhone1,2_2.0_5A347_Restore.ipsw selected but app says "wrong firmware bundle selected"
please help or give a firmware for downoading which work
thanks very much
drownerCZ
· 1 year ago
thats for iPhone 3G. You have to take 1.1_2.0_5A347_Resrore.ipsw
stoiclee
· 1 year ago
Cheers, that had me stumped for a moment
Simon
· 1 year ago
You need to keep the downloaded file as a .zip
Andrew Simpson
· 1 year ago
Thanks for your hard work!
Vertu
· 1 year ago
Working beautifully on my 1st Gen phone..... THANK YOU!!!!!!!!!!!!!!!!!!!!!!
And for all you windows users, BUILD A MAC and shut up.
what can I say besides thanks? you guys are fucking fantastic! you work your asses off for free... no donations.. you take our shit on a daily basis and continue to do what you do. Major respect from everyone to everyone involved in this project/job, you guys deserve it all. major props!
Blake
· 1 year ago
I updated my phone to the 2.0 Firmware, and pwnage tool had no problem when I tried to select the ipsw. However, I keep getting a Bootloader v3.9 file not found error. Perhaps I am doing something wrong or omitted a key step, but as for now I'm in a panic!
Andy
· 1 year ago
HELP!! How do I get Bootloader 3.9?????????
gscott
· 1 year ago
i still cant get it to open, i rebooted, etc, and it wont open, leopard 10.5.4 Intel
p_sean
· 1 year ago
It doesn't work with my PowerBook G4. Help!!
un-impressed
· 1 year ago
Wont work with my Mac Book Pro 10.4.11. I am assuming they built the tool on a different version of Mac OS?
Marcelo
· 1 year ago
Can someone link me to the bootloader 3.9 download.....I can't seem to find one!! THanks!
aidan
· 1 year ago
Has Any1 found it on windows yet
imtrulyrich
· 1 year ago
I dont have a MAC computer... NO NO NO NO NO... is there something else I can do
I am no expert, I think I need some help. I have an unlocked iphone with 1.1.4....I have downloaded the new tool dev team worked so hard on. What should I do now? should I upgrade my iphone to 2.0? Will it still be unlocked? Thanks for all the help! Thanks fro Bogota !
Edel
· 1 year ago
HELP PLEASE!!! "No Bootloader v3.9 file found!" What should i do?
Blake
· 1 year ago
I'm in the same situation. No Bootloader v3.9 file found.
repa
· 1 year ago
thanks from switzerland :) 02:10 am and i'm starting jailbreaking my old 2G iPhone ;)
I'm trying PwnageTool on my current 1.x iPhone (never been pwned before, but it was unlocked/etc with iLiberty+).
It builds the custom .ipsw, but fails to enter DFU mode.
I see this in the log:
2008-07-19 20:09:22 - Successfully built custom .ipsw file at '/Users/......../Desktop/iPhone1,1_2.0_5A347_Custom_Restore.ipsw'. 2008-07-19 20:09:24 - Failed to prepare x12220000_4_Recovery.ipsw file.
I also tried manually putting the phone into DFU mode before running PwnageTool - same problem.
Does anyone have any ideas???
Thanks,
- Paulb
DarthSerial
· 1 year ago
I've the same prob. i tried to repair my systemrights but no success. does anybody have a solution for this problem?
Yeti
· 1 year ago
same problem here, i'm running 1.1.1 and i used iphonesimfree to open mine...
moimart
· 1 year ago
Thank You!
imtrulyrich
· 1 year ago
I dont have a MAC.... No NO no No NO no... is there something i can do
Ronkeli
· 1 year ago
Thaks a million
ratay
· 1 year ago
thanks from Poland : )
PT2.0 WOOORKS!!
thx dev-team :)
genesis
· 1 year ago
Awesome work guys... Now call me stupid if you will, but how does it operate? Compared to Ziphone?
I just ran it and it's not taking any actions.
Please let me know.
Nikolas
· 1 year ago
APP DOESN'T OPEN! THE ICON IS JUST BOUNCING UP AND DOWN IN THE DOCK!
WHAT CAN I DO?
I'VE BEEN WAITING FOR THIS APP FOR A VERY LONG TIME! PLEASE HELP!
HELPME!
· 1 year ago
Same problem here, I tried repairing persmissions, rebooted nothing seems to work.
running macbook pro with 10.5.4 all updates installed
taka
· 1 year ago
Mine is having the same problem! I've downloaded it three times from 3 different servers and repaired permissions. Rebooted twice. Tried it on my other mac. NO dice.
scottieK
· 1 year ago
same herrrrrre HELP!!!!!!! waiting 4EVER!!!
jdog
· 1 year ago
This is my issue as well.
mcrawdee
· 1 year ago
ive had to wait sooooo long for the tool to come out and when its available its only for MACS :-(
So the next question is WHEN WILL IT BE AVAILABLE FOR WINDOWS USERS??
jesse
· 1 year ago
are you kidding me? soooo long? a week is sooooo long?
Bill
· 1 year ago
Windows version please :-)
Ro2
· 1 year ago
What ipsw file we are supposed to add? the 1.1.4 ? it says cant recognize the 2.0.
Richard Burns
· 1 year ago
Hey Dev-Team, my problem seemed to have been fixed by choosing the advanced option, although i though that the simple mode would have jailbroken the device, a bug maybe?
Doing advanced now & boot neuter running. Was gonna ask if you guys wanted a fast mirror but doesn't look like you need it.
Flys to shit my friends, flys to shit
jomo
· 1 year ago
thank you soooo much, you guys are great :D
valentin
· 1 year ago
Trying now on 1.1.4 jailbroken & unlocked.
realindoor
· 1 year ago
I've installed averything and now I have an iphone with pawnage logo on startup and STILL LOCKED..
thanks heaps guys, but i get an error (1) in itunes 7.7 when trying to install custom .ipsw?? do i have to downgrade to itunes 7.5?
jewfro
· 1 year ago
thanks from HOLLYWOOD.
Gamer X
· 1 year ago
This is totally awesome. Way to make my boring Sat an awesome one.
Mickey
· 1 year ago
CAN SOMEONE PLEASE MAKE A CUSTOM FIRMWARE USING PWNGAGE FOR 2.0 THAT WORKS AND UPLOAD TO RAPIDSHARE SO PEOPLE WITH WINDOWS CAN USE IT? PLEASE!!!
I WILL LOVE YOU FOREVER!
Sascha
· 1 year ago
Thank you! Even my 8GB iPhone lies in the drawer right now because of screen-failure =(
jbredcar
· 1 year ago
Great piece of work guys! Just to let you know, it runs fine on my Mac Pro, but when I load on my MacBook Air, it only half loads (icon is there, but there is no main screen). Both machines at 10.5.3 with iTunes 7.7. HTH
huanix
· 1 year ago
The tool isn't recognizing my phone in DFU and the custom image write is failing with error(6) in iTunes. Still trying lots of stuff. Can someone give the setup for a successful build? I've used a hackint0sh to restore, and now trying to restore the image with windows (fail) - I guess I'll move to an authentic mac next just for grins.
Si
· 1 year ago
Thanks so much, I really appreciate all your hard work :)
mcrawdee
· 1 year ago
NOW THE NEXT QUESTION MANY OF US WILL ASK IS WHEN CAN WE GOE THE TOOL FOR THE WINDOWS OPERATING SYSTEM??????
WE'VE HAD TO WAIT ASWELL N I SUPPOSE WE'VE GOT TO WAIT EVEN LONGER :(
kevipapo1
· 1 year ago
Love to everyone on the team. Thanks for all the hard work!!
deathfromabove
· 1 year ago
Thanxx a lot from Hamburg, Germany
gizmo15
· 1 year ago
thanks a lot for this!!!!!!!
i'm french so dont hurt my lol
Fe
· 1 year ago
Thanks so much! Worth the wait. The App has a real nice UI too guy! Great job!
I did everything right but my phone is not activated!!!!
Boo$
· 1 year ago
Thank you for all the hard work!!
iShoe
· 1 year ago
wooo hoooo! its finaly out ! thanks you def team, now let me see if it will work ! :)
Alex
· 1 year ago
how do you get installer? All I got was cydia and thats it.
Alex
· 1 year ago
All I got was Cydia and nothing else, how do I get installer?
kofster
· 1 year ago
Thank you sincerely Dev team. Thanks you very much for your efforts. And while I applaud you for your diligence, I hope that you will be able to deliver an unlock for iPhone 3G and us future iPhone 3G users worldwide who want choice. Thank you.
not working on my powerbook g4... it just bounces then stops... but the same file works on my dads macbook pro, so its not the downloaded file. Anyone else have this problem?? :-)
And thx a million dev team, we've all been waiting for your little miracle!!!!
Daniel
· 1 year ago
Thanks from Australia IDT . d
clint11
· 1 year ago
thanks dev team, but i am getting an error (1) in itunes when i try to install custom .ipsw.. any ideas?
af85dude
· 1 year ago
THANK YOU SO MUCH!
Thiago
· 1 year ago
When will be the release for windows version?
Ethan
· 1 year ago
it says i have the wrong firmware bundle but im putting in the 5a347 1.2.0 but it wont take it any help?
Hedi
· 1 year ago
I'm dreaming... A friend (Kofster) called me at 2:30 my local time... It can't be real...
Windowuser
· 1 year ago
I believe that iphone DevTeam will release Window version soon...
clint11
· 1 year ago
thanks dev team, but i am getting an error (1) in itunes 7.7 when installing custom .ipsw and an error (5) when i tried in itunes 7.5.... an ideas??
Nikolas
· 1 year ago
CAN ANYONE UPLOAD A PWNED .IPSW FILE THATS WORKING? FOR A IPHONE 2G!
THAN EVERYONE IS HAPPY, ALSO THE WINDOWS GUYS!
gobble
· 1 year ago
i'm having the DFU issue like a lot of people are. But has anyone else noticed that on the "Failed to enter DFU mode" screen that the iPhone picture is fucked. The picture has the USB cable going into the side of the iPhone with the home button in the wrong place. Something isn't right here.
2008-07-20 01:32:22 - Failed to prepare x12220000_4_Recovery.ipsw file.
realindoor
· 1 year ago
IPHONE NOT ACTIVATED
zoomad
· 1 year ago
Would you release it already! Geez, we've been waiting OVER A WEEK for this. Come on, we dont' care if it's buggy. We'll deal with it. Most of us know how to program and don't need some stupid UI for the incompetent.
themodulor
· 1 year ago
Thank you devteam, i heart you.
Beers on us!
Major_Skidmark
· 1 year ago
Thank You very Much.
genesis
· 1 year ago
Thanks, but compared to Ziphone, how does it work? do I need I-tunes running? My phone is locked due to my stupidity when downloading apple's latest firmware. Will this software fix the problem?
raph1992
· 1 year ago
my iphone fails to enter DFU mode ?!?!?! i can get it in DFU mode fine with iLiberty Thanks anyhow!!!
raph1992
· 1 year ago
my iphone fails to enter DFU mode ?!?!?! i can get it in DFU mode fine with iLiberty Thanks anyhow!!!
dhuang
· 1 year ago
Thanks guys. :-) Can't wait for the next release for firmware 2.0.1!!
gevee
· 1 year ago
thank YOU sooo much!!
RIM
· 1 year ago
Do you plan to have one for windows soon?
3lixir
· 1 year ago
Just updated my iPhone 1st gen to V2.0 and it works great - thanks Dev team
Matt
· 1 year ago
The guys that can't activate - just a guess but maybe they clicked yes to being a legit iPhone user when maybe they need to click no? Legit users shouldn't need to activate, only jailbreak whereas non legit users will need to activate it. Just my $1.
ben
· 1 year ago
does somebody fancy making a youtube vid of the process. i would love to see it in action first. and also do u have to restore original firmware 1.1.4 first?
hasteveha
· 1 year ago
The phone should be pwn'd first.If you have DFU error here is what to do. Download the 1.0 pwnage and click 1.1.4 firmware, then click ipwner, put it in dfu mode. It pwn's the phone. Afterwards use 2.0 pwng build the custom 2.0 firmware, if it ask you if you already pwn, say yes. put phone in dfu mode, in itunes restore using the custom 2.0 firmware, then BAM done!
DarthSerial
· 1 year ago
i have an iphone 3g... did you tried to pwn with the old pwnagetool? it says: no! ;-)
Hrmmmm used the tool, used the custom firmware created by Pwnage, entered DFU, installed custom F/W, now iphone loads w/ the pwnage logo but never goes past that logo, any help/ideas?
Using iPhone 3G, itunes 7.7, firmware 1,2_2.0_5A347, OS X 10.5.4
always get "Failed to build" messages - looking forward to ver 2.1 of the tool - this one is not ready for prime time!
Jesse
· 1 year ago
I am REALLY fucking stupid... I know. But what is this program for? Does it provide unlocked 2.0 firmware for orig. iPhone? please excuse my idiocy :(
Pacman
· 1 year ago
Ok, anyone want to upload a pwned firmware for those of us who haven't upgraded to a mac yet?
Bob
· 1 year ago
Awesome. As always, thanks for the hard work. Many of us early adopters (and cheapskates that have no interest in paying ATT) appreciate not being left behind.
DOES NOT WORK! I'M BRICKED!! PLEASE HELP SOMEBODY!!!
iPod touch 8GB, on 2.0, I clicked "no" when it asked if I had pwned before, said it failed to enter DFU mode, then I option-clicked the firmware in iTunes, and the finished "Extracting software" and then gave me an unknown error, -6. Now I can't even restore to the normal firmware without it giving me that error!! HELP!!!
Anthony
· 1 year ago
i get this same error with trying ot restore with custom firmware. but i am still able to restore with old firmware.
Victor
· 1 year ago
GREAT!!!! Thanks a lot, you guys are the best, were can we donate?
jimi_42
· 1 year ago
I will quite happily mirror this for people if the dev team will give me permission to mirror it, i do not want to put other peoples work on my server without permission from the authors
wainwda
· 1 year ago
Amazing work. Well done to the whole iPhone Dev Team. Sleep well with big smiles tonight guys!
Chris
· 1 year ago
How about some instructions? I got as far as this iPhone1,1_2.0_5A347_Custom_Restore.ipsw being made but then an error screen on failed to enter DFU mode? Now what do I do?
Thank you so much guys. Worked like a charm on the first try. I know you have stated that you don't except donations, but I am willing to donate if you ever do. I now get to use my phone with the new 2.0 firmware, and T-zones, without paying the insane AT&T monthly bill.
Once again THANK YOU SO MUCH!
Marco
· 1 year ago
Dev Team,
Thanks for all your hard work on this. It works perfectly for me.
Sincerely, Marco.
Breno
· 1 year ago
Thanks guys! Woks a treat, except I can't connect to my wireless anymore... any suggestions?
Breno
· 1 year ago
-> FIXED firmware 2.0 and linksys router issue -> Upgrade router firmware to latest version!
Stiii
· 1 year ago
Awsome! THANKS!
Foxy
· 1 year ago
It worked ! My iPhone 2G is activated, unlocked and jailbreaked !
Thank you so much, dev team !
WORKS!!
· 1 year ago
I am VERY HAPPY
1gen iPhone with FW 2.0 works perfect with Swiss Orange provider!
i will quite happily mirror this for people if i am aloud, i do not want to put someone elses work on my server without the authors permission. THANK YOU FOR A KICKASS PROGRAM!!!!!
mazdamiata210
· 1 year ago
Here is my download link right off my PC hope you guys dont kill my connection
hi, i upgrade to 2.0, but no bootloader comes. But i can see this pine apple at start...can someone help me?
fed
· 1 year ago
Tool wont open for me either. Intel 2.6GHz Macbook pro, OS 10.5.4 Tried rebooting and powering off the machine. No luck
LeSage
· 1 year ago
Vraiment tres tres simple !!! De la bombe atomique !!! 1. telecharger le firmxare 1,1 2.0 2. Telecharger les bootloader 3.9 et 4.6 3. PwnageTool 2.0 ;) 4. Mode restore via iTunes (Command + restaurer) 5. Kifffffffffffffff :P
OK I'll make you one, gimme your MSN address, I need you to tell me the settings you'd like to have.
pcal
· 1 year ago
If you it seems to spin forever for you at various points, just wait. It does get there eventually.
Seems to have something to do with the new spotlight indexing (the 'mds' process is going crazy). Just let it spin, though - it will get done eventually.
Ante
· 1 year ago
7/20/08 10:14:12 AM com.apple.launchd[1] (com.apple.metadata.mds[247]) Exited abnormally: Abort trap
mds died, then pwnage spun forever
Apple
· 1 year ago
Good job. now try working with windows
Chris
· 1 year ago
I'm love the pineapple!! So good to be free. Even better to be cured from the addiction of refreshing your website every 15 mins. I finally have my life back, although some may debate i never had one to start with. Seriously, A big thanks from Northern Ireland. You guys are geniuses!!
jake
· 1 year ago
for all those with dfu problems after creating the custom firmware - if you have pwned ure phone before but dont remember or think u did but cant remember!
choose yes to pwned before
then restore with custom firmware
:D
babyfish0226
· 1 year ago
Thank you! Thank you! and Thank you! I love Dev-Term and thanks for your hard work!
Fred
· 1 year ago
Valeu, caras!
Thanks, man!
Mente
· 1 year ago
Excelente
bleeksie
· 1 year ago
Get Fail to enter DFU screen!? How do I go about using that screen to enter DFU mode?
Angerhouse
· 1 year ago
I have successfully upgraded my iPhone 2.5G to 2.0 firmware. I also got the "Cannot enter DFU mode, get a Zune" message, so I just closed the app and put my iphone in recovery mode and connect it to iTunes. When in iTunes, I clicked "Restore" while pressing the "option" key and selected the IPSW PwnageTool built.
Then I just sat back and waited for the restore to complete. =D
Bush-Whacker
· 1 year ago
anybody got a link to 2.0 ispw ??????????????
Bob
· 1 year ago
THANK YOU SO MUCH! YOU GUYS ROCK MY WORLD!
Bush-Whacker
· 1 year ago
anybody got a link to 2.0 ispw??????????????
Goldfinger
· 1 year ago
Thanks. Everything working on first gen iphone. :)
Clifton23
· 1 year ago
anyone know how to get tmobile edge working?
WAM087
· 1 year ago
Looking for that answer also, let me know if ya figure anything out
You are champions. You are clever and deserve all the best in your lives. After having my iPhone bricked once I updated to v.2.0 (from 1.1.4), and since I use Virgin in Australia, the "unauthorised" carrier, I was not able to power up the iPhone and not even use it as an MP3 player. Although I love Apple for their design and cleverness, I hate them for becoming too greedy and wanting to force customers to a particular carrier only, so they can get a bit of the profit from people's calls. Telstra (iPhone reseller No.1 in Aus) is a rip-off big time (everybody knows this, except them), Vodafone (iPhone reseller No.2) doesn't have the coverage where I work, Optus (iPhone reseller No.3) doesn't have the deals like Virgin (who are not selling iPhone (yet)). And I am not a criminal, I bought my iPhone last year (long before it came to Australia) and certainly I had to order it unlocked to use it here. I paid for it with my hard earned money, and I was very upset when my iPhone bricked completely with the update to v.2.0. Dev Tem guys, you returned my phone today with so many important numbers and calendar appointments, and you did it for free. Your PWnage tool is so clever, and complete, that I had my phone recovered within half an hour or so, even if I did not have the bootloader and what not. The PWnage made everything so easy, so I rebuilt my own installation package and I am nor running v.2.0. I already paid 23 Pounds three days ago to some wankers at (iphoneunlocking.org.uk) for their software that didn't work. Not only it didn;t work, they never respond, although they guarantee your money back. To all possible unlockers that found themselves in a similar situation as myself - DO NOT USE the iphoneunlocking.org.uk - THEIR SOFTWARE DOESN'T WORK. And one last helping point to some that may end up needing bootloader 3.9 and 4.6, you can find them here (http://iphonefreakz.com/iphone-firmwares/). Dear Dev Team guys I want to pay for your trouble, although I know you did it for free. I will feel better if at least I pay you the same amount as I paid to the above mentioned wankers, please give me details how can I do that (my e-mail address is visible to you). All the best and keep up the good work guys.
infineon
· 1 year ago
THANKS DEV TEAM for being so generous
after my bloody valentine live, this is a seriously nice surprise
THANKS again, some money I earn as an engineer would go to you the minute you would accept donations
unkonwn
· 1 year ago
i want it for windows ;( Why is the dev team biased to mac when less that 1/4 of computers are macs. Come on zibri stop being emo and do something!
Snolly
· 1 year ago
Thank you very much for everything. Greetings from Athens, Greece.
mkas
· 1 year ago
I jailbroke my 3G using pwnage 2.0 and only CYDIA showed up on the home screen. Is there no installer.app with this? Will I be able to use Summerboard? Please let me know!
Rambus
· 1 year ago
Thanks BIG BOSS AND DEV TEAM FOR PLACING THIS FILE.
tian
· 1 year ago
Tank you so much from Ecuador, South America you are heroes
LAS
· 1 year ago
i'll be waiting for a windows version. thanks iphone-dev team!!!
Alex
· 1 year ago
With Custom Firmware, I've the error 6 with iTunes !!! Help !
orvtech
· 1 year ago
Yo ... stuck on 'Faled to get in to DFU mode' screen ... also tried to put the 3G on DFU manually an tried again... same results.
my OS is Mac OS X 10.4.11 (8S2167)
sage
· 1 year ago
If you are having ipsw problems restore your iPhone and itunes will then create an ipsw file for you...
mkas
· 1 year ago
I jailbroke my 3G using pwnage 2.0 and only CYDIA showed up on the home screen. Is there no installer.app with this? Will I be able to use Summerboard? Please let me know!
Erik
· 1 year ago
Sweet! Just upgraded to 2.0. Excellent tool!
smm
· 1 year ago
You guys are the best. Thank you and keep up the good work
ashdude
· 1 year ago
Dammit... i did something wrong.
Phone was originally unlocked with iphonesimfree and on 1.1.4. and the optus network in australia
created IPSW with pwnage tool, restored using this and now phone is unactivated and locked.
Help!
Yeti
· 1 year ago
I did the same! :( i think we _really_ messed up... i can't even revert it to a 1.1.1 via itunes 7.7... trying to do that now with itunes 7.6.2 though, hopefully that will work to at least get it back to a functional state
cleo
· 1 year ago
I have ziphoned (I know... I didn't know any better at the time) 1.1.4 on T Mobile that I can't get to work with the tool. It gets to the DFU part and says it couldn't get the phone into DFU mode :-( Help!
I tried to get the phone into dfu then restore with the ipsw that pwnage tool made but it wouldn't work with itunes ('unknown error)
Please help!
piratetom95
· 1 year ago
yesss, the best birthday present ever. well, my birthday is tomorrow, but still, THANK YOU!!
Bush-Whacker
· 1 year ago
I need a link to 2.0 ispw
ash
· 1 year ago
WEIRD ERROR WEIRD ERROR IM IN DFU BUT IM HAVING THIS ERROR
2008-07-20 03:04:09 - Failed to prepare x12220000_4_Recovery.ipsw file.
Chase
· 1 year ago
You guys are awesome!
Just dont my 1.1.4 on Orange to 2.0.
Just a couple of things. Put the phone into recovery before starting PWnage i have found to work fine,
Also i initially did a simple process of creating firmware but it did not activate the phone. I then went back and did an advanced firmware creation and it worked peachy!!!
bram Fabeck
· 1 year ago
thx!!!
Connor Brown
· 1 year ago
i have no idea what im doing i get it open and try to jailbreak my iphone 3G and it says "No Firmware Bundle Found". what does that mean???? help me!!!! someone please!!!
▄▄█ █ █▀█▀█ █▀█▀█ ▀–▄–▀
· 1 year ago
Looks like you have more windows users then expected? Lol... Itunes sucks.
Delmar
· 1 year ago
Word, lol please give us an answer, when do we get the Windows verion??
robalexander
· 1 year ago
90% are window users !!!!
dangerFX
· 1 year ago
90% of who? iPhone users? I doubt that.
Alex
· 1 year ago
With Custom Firmware, I've the error 6 with iTunes !!! Help !
Gibbbi
· 1 year ago
TO ALL DOODS HAVING PROBLEMS WITH THE RECOGNITION OF IPSW:
The right version for 1st generation iPhone is: iPhone1,1_2.0_5A347_Restore.ipsw (!!!) NOT THE iPhone1,2_2.0_5A347_Restore.ipsw (--> this one is intended for the 3G Phones)
So get the right ipsw and evrything just works fine!
THX SO MUCH FROM LUXEMBOURG Dev-Team!!!
Greeeeetz
nando
· 1 year ago
awesome work... thanks a lot. I got it from the mirror and put it a torrent up on pirate bay. Seeding right now. I tried update and got error 5 from iTunes. Apparently something with my version of iTunes. Put my phone in recovery mode. I restored to custom 1.1.4 I had, reintalled iTunes 7.7 and I'm updating as I type.
Steve
· 1 year ago
Thanks from the UK!
Sher
· 1 year ago
Dev-Team ! You guys are the BEST of the BEST ! ! ! !
Is there any step by step installation guide yet
Ronald
· 1 year ago
Good Job!! It works great!! iPhone Dev Team are the best!!!
Bush-Whacker
· 1 year ago
I Need 2.0 ispw
cadujr
· 1 year ago
Worked like a charm!!!!!!!!!!!!!!!!!!!!!!!
1.1.4 (pwnaged) J+A+U ----> 2.0 FANTASTIC JOB
Maixmum
· 1 year ago
You Guys are the best. If you ever need theme music, Holla at me. Myspace.com/maximumthelyricist. Again. Thank you.
I love Gunny
· 1 year ago
now it is error 1600...and then throws the iPhone out of iTunes...
john
· 1 year ago
Read the note in the post.
aajr2
· 1 year ago
I downloaded it and un zipped it? How do I use it? I have an PC. Is there instructions some where?
DT in Aus
· 1 year ago
Woohoo! 2G iphone 1.1.4 to 2.0 unlocked and jailbroken. Originally locked to AT&T, now on Telstra in Aus!
Thanks Dev Team. Now I can go to work tomorrow without having to refresh every 5 minutes. Bosses all over the world will be glad to have their productivity levels return to normal.
Thanks again for all your good work.
MRM
· 1 year ago
Thanks so much. Good work guys. It is much appreciated.
Michael
· 1 year ago
You guys are amazing! Thanks a million!
peligon1
· 1 year ago
When can we window users take part in the supper around the table? how long on xpwn
aajr2
· 1 year ago
I downloade it now how do I use it? Is there instuctions?
Robbie
· 1 year ago
You guys rock!
Riz
· 1 year ago
Hi I am getting a failed to enter DFU mode...any help?
I think you know
· 1 year ago
I had to put my phone in DFU mode then restart pwnage then turn off my phone ad then go into DFU mode again..
you guys deserve loads of pie and champagne. thanks so much!
nEBuLa
· 1 year ago
Thanx for million Dev_team from Korea!!!!
mjb
· 1 year ago
Dammit, iTunes interrupted the baseband flashing to unlock (my fault, I know - it was trying to restore my backup of contacts and shit).. now my 1st gen won't boot. Can get DFU and recovery mode, but iTunes can't prepare it for a restore anymore. If anyone has any hints, I'd be forever in your debt :)
Absolutely wonderful work guys, thanks again.. took me a while to get iTunes to accept the custom firmware ... perhaps something to do with having 7.7 beta in the past and the SDK ... reinstalled iTunes and entered DFU mode manually and it worked eventually after errors 6, 3, 1600, 1602 and a few others ;)
Dustin L. Plattner
· 1 year ago
It doesn't open on my mac. I am using 10.5.4. intel and it just bounces endlessly in the dock. I have tried several mirrors and every time it finishes downloading I open the program and it will not open. If anybody could help that would be great!
Thanks, Dustin
Raj
· 1 year ago
failed to prepare x12220000_4_Recovery.ipsw cannot enter DFU mode: iPhone 1st Gen, Hackintosh with Pwnage 2.0. Put my phone on DFU via windows and tried again, same problem (can i use the image built by Pwnage via iTunes?) Thank you.
Roosterace
· 1 year ago
I have unlocked hundreds of iphones and I used this and everything went fine until it booted up. Mine is still needing activation. How do I Activate it, why didn't it do it automatically any ideas anyone?
Doodlydood
· 1 year ago
For those with problems - Error 6 or DFU mode related...
That fixed my problem. I kept going into Restore mode (which has the itunes symbol and the cord) and not DFU. Here are the instructions that made it clear to me: DFU= hold power/home for 7 seconds, screen goes blank, wait 2 seconds with blank screen and release power button, keep holding the home button until itunes recognises the phone as in recovery mode and the phone has a blank screen
pLUMBER
· 1 year ago
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!! EARLIER THAN EXPECTED!!!!!!!!!!!!! YOU ARE THE BEST!!!!!!!!!!!!!
zeonardo
· 1 year ago
You guys rox!! "Thank you" isn't enough! Guess I'll join the "I love you" crew! You deserve!
zozo6015
· 1 year ago
Just finished to make my iPhone work with the FW 2.0. It works pretty nice a little bit slower as on 1.1.4 though but everything is OK. I could upload a custom fw somewhere but I don't have access anywhere. If someone can provide an ftp please contact me
DJ VENOM
· 1 year ago
Got it Working!!!!!!!!! ----- Thanks Again From Montreal
intemperance
· 1 year ago
In a war on widows based attrition can we have a VISTA version please? *bats eyelids*
C4d
· 1 year ago
T_T no windows love....? T_T
Bush-Whacker
· 1 year ago
I Need 2.0 ispw
Brenno
· 1 year ago
Thank you very much guys! but i still have to wait for the windows version.
Hey, I downloaded the tool in 4 different places, and when I launch it it bounces on the dock, and then doesn't open. It just sits there and won't open up and wont let me quit it. It also doesn't let me reboot withought pushing the power button. Anyone got any ideas? I am on the newest version of Leopard on a 2 ghz macbook.
Is it ok to update your phone though itunes to 2.0?
Ernest
· 1 year ago
why only for mac??? please i only have win.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
jovannie
· 1 year ago
hey when is this software available for windows vista?
Beli
· 1 year ago
bravooooo :)))
bboom
· 1 year ago
thank! but it says it couldnt get into the DFU mode... anyone an idea?
huanix
· 1 year ago
Thanks for the suggestion - this download was a few megs smaller than the image I was using (this is 218) - I get an md5 of 07df1235aef0bc5f58f331ebc34543be for the "correct" firmware.. but I still got an error (6) when I tried to restore in iTunes.
Akerman120
· 1 year ago
I know you just released it but, you know when youll have it for windows?? no one i know has a mac!
Delmar
· 1 year ago
Word, tell us how long we must wait please???
Jones
· 1 year ago
Thanks so much! :)
Bush-Whacker
· 1 year ago
I Need 2.0 ispw
your tool won't accept1,1..2.0_5A347
What do I use? thats all thats out on the web HELP!
mrb
· 1 year ago
i have a macbookpro and leopard 10.5.4 too, and it only keeps bouncing. it stops eventually but no app is showing and the blue dot that shows the activity of the ap is ot there either.... what's wrong?
Diego Quijada
· 1 year ago
sorry dev team i gotta give it to you amazing job you have done over these past days, no only day but year!!! congrats on making the software!!
##################### hwrevd1, for your custom image, gimme your MSN address, I'll need you to tel me the settings you want #####################
Cheshillsgolf
· 1 year ago
Zero, can you send me this file as well? I have the original Iphone. I need it activated, unlocked, and jailbroken for 2.0. Email is cheshillsgolf@me.com. Thanks.
JD
· 1 year ago
Thank you for releasing the shackles the held back the jesus phone, so that it can ascend to the heavens an begin the rapture
Raj
· 1 year ago
failed to prepare x12220000_4_Recovery.ipsw , cannot enter DFU mode Using iPhone 1st Gen, restored to 1.1.4 orignal. Using Pwnage 2.0 on hackintosh. any solutions?
Jonathan
· 1 year ago
Ran everything, it all worked out.. phone works exactly like it should EXCEPT I lost my rogers service... so now I cant make calls.
Im restoring back to the apple firmware until this gets the bugs ironed out of it
zoohair
· 1 year ago
i lost my service too, damn this sucks
lolgamoff
· 1 year ago
The same thing happened to me. I was able to fix it though. In expert mode, when configuring the ipsw before building it, go into general settings and uncheck "Activate the phone". If you let iTunes do the activation, it should be okay. I'm on AT&T, it's working perfectly.
Super work team, once this baby gets installer working it'll be perfect. ^_^
daphreex
· 1 year ago
I've got this DFU-Error, too :(
ads
· 1 year ago
You guys absolutely rule. Just upgraded from 1.1.4 (with turbosim) to 2.0 (still with turbosim which i probably don't need now). All working perfectly. A bit scary though not having any instructions.....just stumbled through it. P.S Thanks to Simon for supplying link to the required bootloader files.
I have that but the pwnage tool says i only supports 2.0 doesnt recognize it as 2.0
ZeroDegre
· 1 year ago
That's strange because it's EXACTLY the one I used, and it was all good...
Try redownloading everything, fix your HD permissions, in case of.
cptrooper
· 1 year ago
Will this work if im using itunes to upgrade to 2.0 using a currently unlocked 1.1.4 iphone using ziphone?
cptrooper
· 1 year ago
ZeroDegree. Are you able to make me a custom firmware please? I am using windows and have no access to a Mac. Please add me on MSN on call_me_mickey_mouse@hotmail.com
Hey, I got a problem. I downloaded the tool from 4 places, and each time it doesn't fully open. It bounces on the dock for awhile, and then shows in the toolbar but does not come up. It also will not go away unless I force quit. I am running the newest version of leopard on a 2.0 ghz macbook. Any help would be greatly appreciated.
Andrea
· 1 year ago
Same here, on a macbook... Any solution please? Was ANYBODY able to use the tool on a mac laptop of any kind?
I pwned it. but my wifi isn´t working anymore. Anyone else have the same problem?
applle
· 1 year ago
I have the same problem with 1 out of 2 iPhones... the one that zyphone hacked before. I tried 2 different restores with custom pwnd firmware, flashed to both bootloaders, but still no WIfi...
Guru
· 1 year ago
Finally working :-) Simple mode didn't activate/unlock, had to go into expert mode.
THANK YOU SO MUCH FOR YOUR GREAT WORK!!!
Ro2
· 1 year ago
Something went wrong. I have a 1st gen iphone, was 1.1.4 unlocked w pwned. Accidentally upgraded to 2.0 with itunes. Now I went trough all the procees, it was succesfully restored by itunes and at restart shows the pineapple logo, but it remains locked.
ImperialX
· 1 year ago
Select "no" when you're asked "Are you a legit iPhone user?".
WAM087
· 1 year ago
Any one got any idea on the T-Zones Hack with 2.0???
IT4u
· 1 year ago
DEV TEAM I CANNOT THANK YOU ENOUGH FOR UR PROGRAM BUT PLEASE POST A STEP BY STEP PROCEDURE WITH HOW WE CAN USE UR PROGRAM ...YOU TUBE OR ANYTHING LIKE THAT
PLEASE
THANK YOU
Oldboy
· 1 year ago
Greets from Sydney Australia. Dev team, Thanks so much for your hard work!!!! All is working great, and the tools is certainly easy to use.
PEOPLE, will you please quit requesting the Windows version????
I'm sure they are working on it, it's been asked like 89 times in the post. AND, if you do succeed, post what iPhone and firmware you succeeded on so other will know what is and isn't possible.
Faslane
PhS
· 1 year ago
It worked ! My iPhone 2G is activated, unlocked and jailbreaked ! vodafone italy
mrsouza
· 1 year ago
Lotsa luv and respect from Phuket, Thailand. Update worked like a charm. Thanks guys.
Brett
· 1 year ago
mr souza, do you need the region patch or app support patch to work over there in thailand?
gobble
· 1 year ago
thatnks for Update #3, but what about everyone who doesn't eve make it to that stage and is getting the error [TIME STAMP] - Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
MuscleNerd
· 1 year ago
Same advice.
gobble
· 1 year ago
Thanks MuscleNerd. You guys are pretty fucking good.
PoorladRob
· 1 year ago
Thanks for the update about the Error 1600 - that solved it for me. Is it possible for you to perhaps automate this with an incremental update as it seems to be quite common. Many thanks for all your hard work.
John
· 1 year ago
I have a 1st gen pwned and unlocked iphone. When I try to restore it with the custom firmware it gives me error 2001.
Any ideas?
MuscleNerd
· 1 year ago
Be sure you're running "iTunes 7.7 (43)" in iTunes->About iTunes
Balls
· 1 year ago
When I try to restore to the Custom Firmware in iTunes (While in DFU Mode) I get an "An unknown error occurred (6)" and it will not restore. Any help?
Peacock
· 1 year ago
Thx Dev Team! I never give up on believing u guys! And u really bring it here! You guys are so awesome!!!!!
Thx from a Hong Kong little fan
Italian Mafia
· 1 year ago
THANK YOU VERY MUCH!
limckill
· 1 year ago
and for windows ............. thank for this work A MAGIQUE DEV TEAM
bobo
· 1 year ago
the bigest team iiiiiiiiiiiiiiiiiiiiiiiiissss ????
ZeroDegre
· 1 year ago
The A-Team? :D
jaysoo
· 1 year ago
when it tries to add bootneuter custom package, it fails, why is that? and does my sim have to be in the phone?
nltor
· 1 year ago
Ive made the ipsw file, put the phone in recovery mode, and tried restoring in itunes. I get an error 6. Then tried in DFU mode and got error 1600. Any ideas. Have 2G iphone.
ilo
· 1 year ago
Thanks for this. I just wish I could use it.
I cannot get the app to open on Leopard. Just bounces in the dock and never opens, I eventually force quit the app. I've restarted, downloaded it from several sources and still the same thing, how can i get around this?
Doodoo
· 1 year ago
Same thing here. =( Can anyone help?
Restore
· 1 year ago
I can't get passed the 'Browse for IPSW' part. Every single time I choose my bundle it returns the message 'Wrong Firmware Bundle Selcted'. I'm using version iPhone1,1_2.0_5A347_Restore.ipsw..
What am I dong wrong?
db
· 1 year ago
iPhone1,1_2.0_5A347_Restore.ipsw.. is the beta you need iPhone1,2_2.0_5A347_Restore.ipsw..
iinokturnolii
· 1 year ago
thanks you!!!!! the wait was dreadful LOL!!!! thanks again
vampyren
· 1 year ago
Thanks a bunch guys. I just downloaded but will try tomorrow when (hmm or later today) i'm not this sleepy :)
Again great work!!!!!
sander
· 1 year ago
2.0 installed and it works PERFECT!! Its a great tool! AND it was worth the waiting!
THANKS ALOT!
ps: any news about when the new installer is going online?! the Rep team said it would be launched when the PwnageTool 2.0 was launched! Cant wait!!!!
Oliiis
· 1 year ago
Thank you so VERY much. Now i really LOVE sundays :)
I am online now. I am using First Gen iPhone, Need Unlock, Activate and Jailbreak.
Please Add me!
Thanks :-)
Cheshillsgolf
· 1 year ago
zero....cheshillsgolf@me.com. WOuld love it so much if you sent me the custom ipsw unlocked, activated, and jailbroken for original iphone.
robalexander
· 1 year ago
PLEASE GIVE INFO WHEN CA. WINDOWS VERSION IS COMING PPLEEEASE ??
PWNAGE4WIN
· 1 year ago
Hey Dev Team!
Will you release a Windows version? When? Do we have to wait 2 weeks like in April???
PWNAGE4WIN
???
· 1 year ago
when will the pc ver be released?
Brett
· 1 year ago
I just Phwn'd my at&t 3g, its activated but now I'm not getting any signal.. Help please!
Mike
· 1 year ago
Nothing works. I'm using a 1.1.4 unlocked 2G ziphone.
I installed apple's 2.0 software on it, and when the itunes activation obviously failed, used pwnagetool on it. It creates the .ipsw but then says "failed to enter DFU mode"...when it is in DFU mode the entire time. In log it says: "Failed to prepare x12220000_4_Recovery.ipsw file."
I also tried to put it into recovery mode and to use itunes to restore the custom .ipsw, but this also fails, itunes tells me: "the iphone "iphone" could not be restored. An unknown error occured (6)".
After all this testing and all the hype we get this? Very disappointed.
Mike
· 1 year ago
Correction: I was not in DFU mode, my bad. I thought recovery mode and DFU mode were the same thing (they are not).
It works great now, thanks a lot dev team!
Da1AndOnly11
· 1 year ago
For Windows......when? Has Any one heard
Scott Xavier
· 1 year ago
Restoring now we'll see what happens, I love the pineapple logo...
my 3G iPhone got bricked. I'm not stupid.. I did everything as the app said.. did not use bootneuter or anything dangerous, but I can't get any signal.. tried rebooting, airplane-mode, sim-card switch, but still no signal.
:'(
MuscleNerd
· 1 year ago
If you are legit 3g subscriber but you tell PwnageTool otherwise, you won't get your carrier signal. Just prepare another ipsw with the proper selection.
A quicker way if you are good at the shell prompt is to use Cydia to install openssh, log into your iPhone, and do "rm -rf /var/root/Library/Lockdown" and then reboot your iPhone.
Chris
· 1 year ago
is this for macs only or for windows too
Robin
· 1 year ago
Could you please give us any directions on how to use this when you can't get it to launch? I've tried: * rebooting several times * restoring the P-ram * restoring permissions * deleted, re-downloaded * different internet connections It just keeps on bouncing in the dock... Pleaaase! It'd truly make my day.
kelly Hendricks
· 1 year ago
hey man. same problem here, from 2 different machines. i started a thread to try to figure it out.
Hello......I am very worried....I have got a flashing pineapple on my screen and no- one seems to have one of those. What do I do?
pandu
· 1 year ago
thank you thank you thank you! i hope it was worth the wait! cheers from switzerland...
jdog
· 1 year ago
I can't get the tool to open on my MBP. It's bounces for a while, then goes dead. The little light below the icon on the dock, indicating that the application is running, does not light up. I've downloaded it a couple of times from devteam and the mirror, thinking I might have gotten a corrupt copy, but that didn't work. Neither did restarting the computer. No entries in the log until I force quit, where it says "7/19/08 8:53:30 PM com.apple.launchd[117] ([0x0-0x27027].com.devteam.pwnagetool[312]) Exited: Terminated "
J
· 1 year ago
I have the exact same problem. I'm running 10.4.11 on a PowerPC Mac. Is this for Intel Macs only?
Hammy Havoc
· 1 year ago
I have an Intel MacBook on Leopard and I have the exact same problem. Help!
clintonruddle
· 1 year ago
getting error (1) when trying to restore new custom .ispw in itunes... any ideas? i have 2g, i did install 2.0 before ( but then went back to 1.1.4) have tried using the different options in pwntool 2.0.. please help? any1 else getting same issue?
MuscleNerd
· 1 year ago
Error 1 is usually caused by not being at iTunes v7.7.
Please Help. I downloaded Pwnage 2 and Unzip on on the desktop of my MacBook Pro. Click the black and white Pwnage Tool. No window show up. The Pwnage icon show on the dock and on the top left corner I see the Apple signa and Pwnage Tool but nothing happen when I click on it. PLEEEEEEEEEEEEEEEEASE HELP ME. I want to be as happy as all of you guys
Hammy Havoc
· 1 year ago
Same problem here!!!
Lapistola
· 1 year ago
Same here!
bobster
· 1 year ago
PLEASE. How do I do? I Need a 1-2-3 manual. Pleae I'm no a Mac geek, Tell me how step by step.
MoNstA
· 1 year ago
of course it true learn to fuckem read for christ sake!!
1
· 1 year ago
awesome
PHONOX
· 1 year ago
THANKS I WILL DONATE RIGHT NOW!
Scott Xavier
· 1 year ago
AMAZING!!! I am up and running on t-mobile. A little harsh, but if you're hacking an iphone, you better have some knowledge.
I am a touring performing mind reader. If you guys ever want to do a fundraiser let me know. Much respect for all the love.
OMG... I had all the possible error messages this application has to show... ;(
DFU error :S I have installed fw 2.0 because I thought it was like the ZiPhone :((((
jimmeh3711
· 1 year ago
Thank You Dev Team, from EVERYONE in Australia. i sat and observed from afar just waiting for your release. no bugging, no hassling, no bitching, no crying. Patience is a virtue and it feels truly worth it!!!
Thanks again
GREAT WORK TEAM
Peter D. Baumgartner
· 1 year ago
Great guys! Perfect work! Im now with my 1. Generation iPhone 1.1.4 up on 2.0! Thaks alot!!!
George Berva
· 1 year ago
After custom firmware, my 2G iphone is in a continuous reboot. I get the apple logo and then it just reboots, everytime! Anyone else having this issue?
norgemannen
· 1 year ago
HOW THE HELL DO I USE THIS SHAIT!!!!!????
demuredemeanor
· 1 year ago
the terminal command in update 3 contains some odd unicode quotation marks, which makes the copied/pasted command to fail to execute.
jake
· 1 year ago
Hey
Can anyone help, I just get that it can't find the firmware .ipsw. I'm on a 1.1.4 jailbroken and the .ipsw is in my Library>iTunes>iPhone Software upgrade
Anyone know what the problem is?
jake
GARDALAND
· 1 year ago
WINDOWS VERSION PLEASE ?????????????
Alok
· 1 year ago
can i restore the prepared custom firmwares on winodws itunes by putting the iphone in DFU mode? if yes, where do i have to copy these custom firmwares in windows?
Hedi
· 1 year ago
Tried to restore from ITunes with the custom firmware had an unknown error (6)
:((((
demuredemeanor
· 1 year ago
same here, i'm on an ipod touch from before the january update.
tats100
· 1 year ago
Flawless. I DO work with software for a living and this is a great example of right first time. Much appreciated. Come to Harrogate. I'll by you a pint!
sol
· 1 year ago
Is it Mac-only version? Do you (will you) have Windows version?
Thanks
sicballs
· 1 year ago
listen nerds, hurry it up next time!!!!!
mjc
· 1 year ago
Yup, can't get past the bouncing dock icon here either, sadly. Running Leopard with all current updates, intel.
journeyguy
· 1 year ago
I'm in an endless spinner while it is trying to locate firmware. (It's on my desktop - the firmware.) The spinner won't stop for me to manually locate firmware...
Aram
· 1 year ago
Will there be a windows version of this PwangeTool?
GreenX
· 1 year ago
A few problems along the way but I think I finally was able to do it!
snail
· 1 year ago
Thanks so much guys! Pwnd my 2.5G on my old Powerbook, synced with my windows machine from work flawlessly!! BRILLIANT TOOL! Greetings from Vienna!
Beli
· 1 year ago
bravoooooo :)))))
Spbeyond
· 1 year ago
I got the error"failed to enter DFU mode" Then if failed. Anyone?
McBain
· 1 year ago
Turn off Auto-Lock (Settings, General) and start over with Pwnage Tool.
kalantz
· 1 year ago
Thanks for your perfect work
After creating the custom firmware with Pwnage Tool, I restored through iTunes with no errors, however even if my phone has operator signal, IT IS NOT ACTIVATED.
m00z
· 1 year ago
What did you say to "Are you a legit iPhone user?"
shawn
· 1 year ago
do expert mode, worked for me
kellygeorge
· 1 year ago
how about an update to tell us what to do if the app wont launch.
Ian
· 1 year ago
I went through it all and everything was working fine until my iPhone got stuck on a bootneuter screen for a while. Now I think it's bricked. When I try to restore I get a 1604 error. It won't do anything. Any idea how I can unbrick it?
dsfg
· 1 year ago
Oh hey, that was the same for me... Anyone got any tips?
Ozzy
· 1 year ago
Same for me too :o(
Joppe
· 1 year ago
This is just amazing. You guys are great, I can not imagine how much work you have put down in this app. Thanx.
Howard
· 1 year ago
I'm having the Wifi issue as well. It connects to a network fine, but once it has to access data, the Wifi network disconnects. Any solutions?
alex
· 1 year ago
A short one: what about installer.app? :(
Cass67
· 1 year ago
Cedia for the moment, dont think Installer is compatible with 2.0 yet ... Cedia is sparse just now also..
Cass67
· 1 year ago
Quick note to those with 3G iPhone on 02 network in the UK, I just jailbroke the phone, picked the activate option in the Pwnage tool and when it all was done and flashed with the Pwned firmware i had no network displayed and no bars on the phones icon for reception quality.. The settings showed no network either .. iTunes did not complain at me or feel the need to activate me so that part seems to work, i just could not make any calls :-) Re-did the work and did not select the activate phone option and all was well ... Your exp may be different ...
MuscleNerd
· 1 year ago
Yes if you are legitimate subscriber and go through the "advanced" options, do not select "Activate". Only those who aren't legit should use that option.
I've one comment - not exactly a bug, but here you go anyway....
I backed up my 2G phone before the procedure (phone was previously pwned at 1.1.4) and all worked fine, but when you go for the re-sync of music from iTunes, you get no dialogue from iTunes. Solution - deselect one of the playlists and hit apply. Then it does....
Sami
· 1 year ago
Well i made a successful hack on 3G iPhone but iTunes won't prompt me for my carrier settings. So with this hack i'm just running a iPod Touch.
Process completes but when the phone reboots it is still locked and un activated. im running a first gen phone that was running 1.1.3 with Turbosim.
berian
· 1 year ago
i haz just suckezfuly pwnd my yiphone!
thanks team.
good things come to those who wait.
and buy mac.
Pablo
· 1 year ago
Thanks guys!!! Really, you've been up to hell with haters, and still came out pretty fast with your tool..All completely free =) As to those wondering about the 3.9 thingy, i had the same problem...just download the files at http://www.enkrypted.com/bootloaders.rar Then in pwnage choose browse, and select the bootloader file (in my case 4.6)
Anyway.. thanks! I hope everything works.
PS: Sorry if there's problems with my english.
Dev Gupta
· 1 year ago
This is awesome. You guys rock. My blog will be immensely benefitted from this news. And I am going to go ahead ahead and buy 3G now. Dev
is there any way that we can have the Installer.app, in the pwnage says not supported??? :((
Cde
· 1 year ago
The program will not open for me. I have tried it on two intel macs even on different accounts. Is there something I am missing?
Steve
· 1 year ago
Please, someone with a succesfuly activation, jailbreak and unlock of an iPhone 1 using this tool, could be so kind of share the modified iPhone1,1_2.0_5A347_Restore.ipsw with us, the poor guys using Winsucks?
You can upload it to rapidshare and be the Windows users savior! Your help will be GREATLY appreciated.
please
· 1 year ago
YES, this is the only way. please.
Renan
· 1 year ago
does anyone know how to get the installer.app???
Fucking angry
· 1 year ago
Ive been waiting on a string for this app for a week and it WONT WORK WITH WINDOWS!!!
ARE YOU KIDDING ME!!!
This is just fucking great...
xxporkxsodaxx
· 1 year ago
For some reason I can't select the 2.0 firmware when I am trying to pwn my older iPhone. I try to download it again from other websites but it keeps saying that I have the wrong firmware selected, any ideas to what wrong?
Kurt Owens
· 1 year ago
bring on TZones....I got it working
WAM087
· 1 year ago
any luck with the TZones?
botznmf
· 1 year ago
does this work for mac or pc
Meme
· 1 year ago
I downloaded iPhone1,2_2.0_5A347_restore.ipsw and I get "wrong firmware bundle downloaded".
Twadds
· 1 year ago
Thanks....again
hwrevd1
· 1 year ago
xxporkxsodaxx: make sure you are using iPhone1,1_2.0_5A347 and not iPhone1,2_2.0_5A347
jimi_42
· 1 year ago
PWNED!!!! Thank you so much guys, all that waiting was more than worth it
ackurz
· 1 year ago
is pwnagetool only for mac?
huubk
· 1 year ago
4.18 am and I see a gorgeous pineapple logo in my screen....:-)
THANKS DEV TEAM!!
uptimistik
· 1 year ago
WINDOWS! WINDOWS! WINDOWS!!
InhexSTER
· 1 year ago
Need help...After i pwned my 3G iphone pwnage logo appears and it restarts i NEED HELP!
dahls
· 1 year ago
guys! Im sitting here on a bus in Trondheim/ Norway. Quite drunk after loads of Dahls pils :-) this night is getting even longer. Greetings! Id like to send you a bottle of Dahls and some snus. I will donate some money to red cross in your name as well
kirch21
· 1 year ago
will this work with pc, and is there a youtube video or some tutorial on how to use this, thanks
Stuck on "Flashing Baseband" for about 20 mins! :(
Any tips?
MuscleNerd
· 1 year ago
If you are *sure* it's on the baseband part and *not* the bootloader part (a very important difference) then you can power down your iphone and try the dfu restore again (you won't need to re-run pwnage if you are good at getting into dfu mode using keypresses). Please please do not turn off your phone if you're in the "flashing bootloader -- do not interrupt!" screen though.
dsfg
· 1 year ago
MuscleNerd, I had this... I tried restoring several times, but iTunes always failed to get the iPhone prepared for update - I've currently managed to get 7.6.2 on windows to restore 1.1.4 .
Any tips from here? should I fully downgrade baseband and start again? or can I just restore to the Custom ipsw with 7.7 after the downgrade finishes?
kwanzaa
· 1 year ago
plwase please please help...i was foing the restore part of the install and the iphone fell out of the dock and is now giving me error 1604 i tried all the methods from apple. Please i need help
Craig P
· 1 year ago
Thank you very much. Unlocked 1st gen 1.1.4 iphone using ZiPhone. Just updated to 2.0 using Dev Teams Pwnage. Wow so simple. Again thank you very much for all you do and have done......... ;-)
Steve
· 1 year ago
Thanks.... I was wondering if the iPhone 2G 1.1.4 had to be pwned previously .... Here we go!!! :D
Calin
· 1 year ago
To get the error 6 to disappear create a directory in the library/itunes named Device Support, and re-run PwnageTool, after it creates your custom ipws it will instruct you on how to make it go to DFU and just alt click restore and choose the custom firmware to get it to work.
aarond
· 1 year ago
Does it only work for mac or does it work for windows as well
bebbzor123
· 1 year ago
Dev team.. This is a serious question, how long will it take for the win release? 90% of all users use windows.
Please give me an answer!
piuswilson
· 1 year ago
Well my iphone is keep rebooting by it self? any idea or its screwed up now!!!
dojjah
· 1 year ago
You guys are awesome! Thank you!!!
aaron brown
· 1 year ago
hi, um where do i get the 2.0 .ipsw?
dial
· 1 year ago
thanks dev-team. worked like a treat here!
McBain
· 1 year ago
Hey, this is for you kids having problems with the stupid DFU error and the thing telling you to get a Zune. You don't need to put your iPhone in DFU ahead of time! The Pwnage is supposed to help you put it into DFU, and the screen you're on just means that Pwnage couldn't communicate with your iPhone.
Now why couldn't it communicate with your iPhone? Could it be that it was on Auto-Lock? I struggled with this thing forever until I figured it out.
Your iPhone should be on its home screen as normal. If you're in Recovery Mode or DFU mode, just hold down Home and Lock until it reboots normally, and let go. Go into your settings, General, and turn off Auto-Lock. If iTunes is running, quit it. Delete anything in ~/Library/iTunes/Device Support. Now start Pwnage Tool and everything should work fine. Good luck!
McBain
· 1 year ago
Apparently if your iPhone is sleeping, then Pwnage Tool can't talk to it. That's why you get the Zune thing.
zachincool
· 1 year ago
When it asks me if my ipod has been pwned before I click No but it says "U Fail, U WANT ZUNE O WOT, FAiled to Enter DFU MODE" when i click yes, it works. whats wrong?
blazened
· 1 year ago
Hi guys, I have an iphone that has the 2.0 software on it, and is now locked, unactivated and cannot get past the emergency screen. Once I start using this tool, is there anything that I need to do/restore or will this program take care of everything ? I am a windows user, so I have to wait. Please reply
shcodon
· 1 year ago
thanks you from vietnamese iphone user
WRDinc
· 1 year ago
I dont get it. Im new at this. It says "no bootloader v3.9 file found? What the heck is this about?
ash
· 1 year ago
after pwonage if I re-import the backup with itunes will damage pwonage thing , or its safe?
James M
· 1 year ago
I've done that. It will work fine. Go ahead!
vveb
· 1 year ago
So everything looks to have installed correctly... but i still see no installer app... how do i get the installer app?? i just pwned the iphone 2G.... thanks :)
kd13
· 1 year ago
Dev Team will you please make an update about a working windows version.
Ian
· 1 year ago
Thank you so much, Dev Team! I'm going to Europe in a week and a half and was hoping I could use the 2.0 firmware there with my foreign SIM cards. You've saved the day!
Malcolm
· 1 year ago
Hi all. First of all, thank you DEV Team you have really worked very hard for us all. I am new to this stuff so please forgive my ignorance. I have iTunes 7.7. Can someone please tell me how to get iTunes to use the custome restore file rather than the one from apple.
James M
· 1 year ago
Put the iPhone into recovery mode as instructed in the link below,
Then, press the ALT key on your keyboard and at the same time click Restore in iTunes, a box will appear asking you to locate the custom firmware and just locate it from the one you created Pwnage. Hope this helps!
Jeff
· 1 year ago
Great News . when do you have the windows version running THanks guys
clipse
· 1 year ago
After It builds ispw i get a message saying that it failed to enter dfu mode...... any suggestions??
dino
· 1 year ago
Is there a terminal app for Cydia? If so, what's it called?
Is there any info on when instaler.app will be supported? I cannot install apptapp, which is pretty much the main reason for jailbreaking. Cydia is VERY lacking.
Abe
· 1 year ago
I unlocked my phone using izphone when it was running a 1.1.4. I do not own a mac computer. I got win vista. Can anyone help with what i need to do to get my phone jailbroken knowing that i am running 2.0 on my iphone. I would really appreciate it. Does this recent download even work on win or is it stricly for mac? Thank you
please
· 1 year ago
Please working windows version where all dying here of unfairness...
Reply to this if you want windows version
34
· 1 year ago
One question- a friend of mine had a different smartphone that he unlocked, & apparently it changed some network settings & ended up using a different packet system, and he ended up getting a $5000 phone bill that month. Managed to knock it in half, but obviously still sucked for him... can I assume that this sort of thing won't happen w/ a jailbroken iPhone? (in JP on Softbank, if that info helps/is necessary)
grrrnz
· 1 year ago
WOOT thank you iphone dev team!!
ryanhammoud
· 1 year ago
Hi Everybody and Dev Team, I'm a guy in cyprus who had bought the 1st gen iPhone one year ago..When i bought it it came already unlocked, jailbroken, and activated..But when the 2.0 software came out, i waitedi decided to try this Pwnage Tool..I was worried that i couldnt do it, because i simply didnt know how to..But this interface was soo easy to use, im glad you waited to release this till it was ready because you made it very user friendly...so in conclusion, i want to state that I am the first person in Cyprus and maybe even the mediterranean to "Pwn" their 1st gen iPhone to 2.0 software and have it working on Cyprus' Cytamobile Vodafone telephone network!!! =) thanks dev team!!
ps. I had one problem with the Pwnage Tool.. The boot up logo..I actually liked the apple boot up logo..it made the phone seem more original, and like a real apple item..Now it looks like a cheap apple rip-off...no offense, i love the tool, but i chose the simple mode and didnt get a chance to keep my logo =C, but i dont wanna go through the whole process of "Pwning" my iphone just to change the boot up logo...but still good work
KimboKastekniv
· 1 year ago
Hello ryanhammoud, I've got the new iPhone 3G unlocked by PwnageTool but is not available with CYTA network. Do you know any solution that could help to make my iPhone 3G work in Cyprus?
Nmills4
· 1 year ago
i have sucessfully pwned my iphone 3G. now when i have 0 bars and looks as if my phone isn't activated. help!
buddabang
· 1 year ago
I SAID NICE ONE BRUVERS!!lol...thanks guys you're all legends, managed to do it eventually, was a tad fiddly and encountered many probs from below but finally got there through patients, im now looking at the pineapple logo as it loads!,
what i done was restore my old iphone in the newest itunes and it automatically loaded 2.0. then used the PwnageTool and it asked me for 3.9 loader and the latest one 4.9 i think, anyway theres links here and on sites to download them now,
the trickiest bit was getting the iphone in dfu mode, and having the phone in the right state when it was in the PwnageTool, got there in the end... now i'll crack my new 3g iphone!
thanks once again , (ah and theres the home screen! *sigh* ) lol ;o)
blazened
· 1 year ago
which one did you use ? 3.9 or 4.9 ? So did you have to do anything to the firmware at all other than just run the software ?
PCsSuck
· 1 year ago
PLEASE...DON'T EVER MAKE A WINDOWS VERSION!!!!!!!!!!!!!!!!!!!
Do the world a favor, buy a MAC!
please
· 1 year ago
You are a selfish assholke who will never make true friends.
cybermafia
· 1 year ago
My iPhone Keep rebooting by itself? any idea whats going on?
Kenny Chen
· 1 year ago
I would love to jailbreak my iPod as I have never done it before. Unfortunately, this program is only for Macs. I know it isn't easy to make these kinds of programs and this to you is only a comment, but please make a Windows as many Windows users would love to use this program.
Gettzz
· 1 year ago
Do I have to download anything before I Pwn my iPhone 3G?
chris
· 1 year ago
I've done everything. I've followed all directions. And I've gotten all the way to the end. But after all is said and done, after iTunes finishes restoring with the custom 2.0 firmware, I get the connect to iTunes screen. In other words, FAIL. Should I or should I not have my T-Mobile SIM in during the process? Does it even matter? Can anyone help? Is there any help? I am just so frustrated, I can hardly stand it. A big thank you to the Dev Team though. Apparently many people have gotten it to work.
Dale
· 1 year ago
Thank you for this! Now we just need a windows version ;-)
cybermafia
· 1 year ago
My iPhone is keep rebooting after custom ipsw... andy idea? whats going on?
colin
· 1 year ago
Thanks for all your work. :)
ggunit
· 1 year ago
this sucks wat should i do my iphone for the past week was stuck when i upgraded to 2.0 and now when im trying the new ipwn 2.0 i keep getting the dfu error and i tried putting it myself put i still get error 6 i keep on getting it wat should i do someone help me or email me please at sahilthareja_911@hotmail.com
GenghisPhlip
· 1 year ago
Rkage
ads
· 1 year ago
Awesome! Worked a treat on my 1.1.4 with turboSim. You guys rock. Thanks for all your hard work.
Jason
· 1 year ago
i get all the way up until it asks me if i have pwned this iphone before, and i say no, and then it says failed to enter dfu mode. does anybody have this problem? is there any way to fix this?
James M
· 1 year ago
You have to put the phone into DFU mode yourself. I put mine into Recovery mode as it prevents you from getting the 1600 error code shown in the teams 3rd update in their release post. The link below gives you instructions on how to get the iPhone into Recovery Mode, it's quite easy then all you need to do is press ALT on your keyboard and locate the custom firmware and you're good to go. If you need any more help just ask.
hi can some one please make a 1st g iphone .ipsw 2.0 on there mac and then put it on a mirror for us windows users please.
many thanks
please
· 1 year ago
My friend might do this if i tell him how to. Please would you tell me how to so i could guide him. He can give me the orginial firmware 2.0 but how is he supposed to get the hacked one?
501r4c
· 1 year ago
Yay! finally I can try the 2.0 on my iphone
bizzarefoods
· 1 year ago
I'm not able to restore the custom image in iTunes - error (6) hmmm... anyone figure this one yet?? i kept getting DFU error in pwnage so i just tryed restoring.... got that error 6
HELP ??
ggunit
· 1 year ago
someone please help ive been stuck in 2.0 ever since last week when i accedientslly upgraded to it and now imtryin i pwn 2.0 and i keep geting dfu error and when i try putting it in dfu and i get error 6 and when i put it in recovery mode i still cant i still get error 6 i keep getting it please help please email me or post a comment email me at sahilthareja_911@hotmail.com
Michael
· 1 year ago
heyyy,,
has anyone got the same problem as me,,, i download it and openit up all it does is bounce for 2 mins and them it stops and freezes????
anyone have ne ideas???
Marc
· 1 year ago
Hey guys thanks for the tool. Couple problems. I already updated my touch to 2.0 and now the tool doesnt recognize it in recovery mode. I think i should've waited to update. I have used the tools in the past with my old touch but not this one. I tried to put an old firmware on it but it doesn't allow it. Tried using old tool 1.1 and it doesn't regonize it in recovery mode. Any suggestions would rock. Thanks again for your hard work.
rob dinero
· 1 year ago
I ran the iPhone1,1_2.0_5A347_Custom_Restore.ipsw the file on itunes and everything, the Pineapple image showed up and everything, but the Iphone is still unlocked and shows the itunes+usb image.
I am using iphone v1, 2.0 firmware
BrianSchu
· 1 year ago
Sweet! Thanks guys. Great work.
DP1262
· 1 year ago
I finally understand. I've been an asshole, you guys are amazing in way more ways that can be counted and this program is simply beautiful. Only grip and it's a very small one. When adding the bootloader files just give us an option in the drop down menu to add them. Just to make things a little quicker. But even then this is too easy you guys rock!
animalsjt5
· 1 year ago
this downloaded but then it says something about bootloader 3v9 or seomthing and i dont have that, where do i get that at??
SlashAndBurn
· 1 year ago
I love you guys, Keep up the great work!
Nerds
· 1 year ago
Can anyvody help me! I Have windows not apple? can I do some thing so the app runs? Please! nerdnuts@gmail.com.
arturo
iluvdevteam
· 1 year ago
Thank you so much!! Everything is up and running and no problems at all on 2.0!!!
timthedj
· 1 year ago
so its great you've jailbroken the iphone 2.0 fw. but now what? what can I do to my phone once its jailbroken... what are some good sites to get apps and cool stuff to do once the phone is jailbroken... that's the only thing that's holding me back from running this application!
lol im pretty sure its a fakje one...its turn ur iphone into a brick if u use it...
Ro2
· 1 year ago
It didnt activated it, dont know if its unlocked. Iphone 1st gen, upgraded to 2.0 from 1.1.4 was unlocked with ziphone.
timthedj
· 1 year ago
what can you do once its jailbroken? what are some good sites for jailbroken apps?!?!
link me folks!
af
· 1 year ago
Don't know where installer went, but who cares!
LOVE IT! Thanks Dev Team
hwrevd1
· 1 year ago
please: THANK YOU!!! YOU ARE AWSOME!
hwrevd1
· 1 year ago
please: THANK YOU!!! YOU ARE AWSOME!
Macfreak
· 1 year ago
Thanx guys - as always you have delivered a fantastic tool...Original phone jailbroken and unlocked within minutes:) Now will patiently wait for the unlock for my 3G unit...
Again from the iPhone community - BIG THANX
Iron Demon
· 1 year ago
You guys are Gods of Code. My hats off to you!
Hammy Havoc
· 1 year ago
This doesn't open? The icon just bounces for around a minute then there is no window? Or a blue dot underneath it?
Help! Running Leopard!
wasianed
· 1 year ago
IT WORKS! Thank you guys!
rob dinero
· 1 year ago
THE PINEAPPLE IMAGE SHOWS UP WHEN I START THE PHONE BUT IT DIDNT UNLOCK????
jaysoo
· 1 year ago
why doesn't the pineapple show at the end?
me
· 1 year ago
It works with windows vista???
79.Au
· 1 year ago
Another with the bounce - stop - and freeze issue. Leopard 10.5.4, MacBook Pro. Itching to give it a go!
charliei
· 1 year ago
I have the same problem. Imac 20" Leopard 10.5.4 unlocked with ziphone for 1.1.4
charliei
· 1 year ago
I forgot to say thanks to the iphone-dev team. You've taken undeserved tons of abuse .
Anyway the following happen to me - started Pwnage tool 2, go bouncing icon for a couple of minutes, then it just stopped.If I clicked on the icon the apple icon and pwnage would appear in menu at top of the screen. Clicking on the Apple icon would not produce a dropdown. By moving to another app the apple icon would give a propdown and I could force quit pwnage.
I started pwnage again with the same bouncing icon effect. This time I put the iphone 2G 16Gig into DFU mode, Itunes responded and a pop-up appreared saying "Yhe application "pwnage Too;" cannot be launched" with an error code -1712 and the pineapple icon started bouncing again. Hope this helps debugging
Sam
· 1 year ago
Great its released now but what can you really do with it? I am very grateful to the iphone dev team for this great program and all the hard work and time they put in to it but really come on developers. The iphonedev team worked 24hrs a day for 8 days after the new iphone software was released. The developers for software on unlocked iphones obviously sat around and twiddled their thumbs. Now this great software is released but the point of Cydia is to install programs and there are absolutely no programs ported to 2.0 yet. And explain to me how Installer is alot better the Cydia but those people over at Nullriver Software haven't even ported it to 2.0 yet. So what is the point of upgrading now? Might as well wait till at least some of the packages get ported to 2.0 which will be at least another week.
Once again great work iphonedev team but those software developers need to hurry up and get the apps ported.
rhyezkie
· 1 year ago
how about the jailbreak for windows??????
Robbie
· 1 year ago
Hey i just did everyhing, but the simlock remains? Why dat?
outcry
· 1 year ago
Got it working without a hitch on one of two of my iPhones. Thank you Dev Team!!!! If anyone installs the Phone Saber app from the app store don't give it to your Star Wars obsessed 5 year old. He lost control of it and threw the iPhone across the room and it hit a wall. Luckily it's okay. :)
ME_696969
· 1 year ago
So you cant use it on windows:(:(:(:( when will it be out for windows?
norberto26
· 1 year ago
hi guys. am getting error 1600. Any tips? thanks.
adamsandler
· 1 year ago
I've went through the pwning process until it tells me to shut down pwnage and restore iphone with the custom installer, how do i install the custom installer? I double click on it, itunes comes up, but nothing happens?
Activate the phone : YES Baseband Update : NO Disable Partition Wipeout : YES Root Partition : 500MB Neuter Bootloader : YES Bootloader update : NO Unlock Baseband : YES Auto Delete BootNeuter.app : YES Cydia Installer + Recommended sources for Cydia + BigBoss Rep Custom Logos : NO (sorry dev team,I prefer the Apple one :D)
worked for hwrevd1 on PC ##################################################################### #####################################################################
Steve
· 1 year ago
THANKS THANKS THANKS THANKS!!!!! ... I was just about to install Mac OS on my PC just to build this file. THANKS!!!... :P
I will report if it works for me. Did someone already tried this file in Windows with an iPhone 2G? Please report!
cptrooper
· 1 year ago
I have downloaded the custom firmware and it works great!!! Upgrade to 2.0 went very smoothly!
HIGHLY RECOMMENDED FOR PEOPLE WHO ARE USING WINDOWS AND CANT MAKE THERE OWN!!
Steve
· 1 year ago
I´m using Winsucks, I unlocked my iPhone 1.1.4 with iPlus 2.0b, it is NOT pwnd, I downloaded the "Custom IPSW 2.0 for iPhone 2G" that ZeroDegre created... What´s next?.... Simply i put myy iPhone on recovery mode, Shift + Restore on iTunes and select this file?
Musti I pwn my iPhone before trying this?... Please help me :(
cptrooper
· 1 year ago
Put your phone into recovery mode and connect to iTunes and restore using the custom firmware
It's that simple.
deviantdj
· 1 year ago
Thanks DevTeam! You guys are the bset!
MemoBox
· 1 year ago
Gracias muchas gracias dev-team ustedes son los mejores! De chile! _________________________________________________ Thanks you Thanks dev team, they are the best! From Chile!
adamsandler
· 1 year ago
I've went through the pwning process until it tells me to shut down pwnage and restore iphone with the custom installer, how do i install the custom installer? I double click on it, itunes comes up, but nothing happens?
James M
· 1 year ago
Put the iPhone into recovery mode as instructed in the link below,
Then, press the ALT key on your keyboard and at the same time click Restore in iTunes, a box will appear asking you to locate the custom firmware and just locate it from the one you created Pwnage. Hope this helps!
Mahdi101
· 1 year ago
I downloaded it but can't run. Help. Windows O.S.
Wendy
· 1 year ago
TO get into DFU mode: Hold power button until you get a red bar indicating close. slide the red bar across. Hold power and home together and hold for 10 seconds(exactly). Let go of power button and keep holding onto your home button until you mac and Itunes reconizes your iphone and a messsage on itunes saying 'your in recovery mode. Close Itunes and redo the process over and it should work. You will need to remove the desktop folder the program created. any further questions feel free to email me at biggrins@live.com
I dunno if this would work for windows users, but if there are some windows users out there, and have pwned their phone already using the last version, then they could potentially ask their mac friends to just give them a custom firmware made with the program on mac. I assume they could just restore using that custom firmware, and viola..
adamsandler
· 1 year ago
I've went through the pwning process until it tells me to shut down pwnage and restore iphone with the custom installer, how do i install the custom installer? I double click on it, itunes comes up, but nothing happens?
Vince Ketchum
· 1 year ago
does this activate the phone (you know when it's bricked)?
i ran the whole processes and it still bricks me.
=[[
smilerthecheshirecat
· 1 year ago
Congratulations on the success of you dedicated hard work and skill....
Thank you for providing us with the tool for making our devices "free" to play!
Highest regards from the UK
AM
· 1 year ago
Hi.. where can I download the firmware 5A347 when prompted in the PwnageTool?
baguak
· 1 year ago
Worked like a charm, thanks for your hard work!
One thing people are missing it seems is that you must hold down option while hitting the restore button in itunes. Then select the ispw file created on your desktop, it takes a second then click open
If you see the cable and itunes logo you are in RESTORE mode NOT DFU
I would be happy to mirror it if the dev team ever needs more BW
So, i hacked it. Lots of fun. Though iTunes doesn't prompt me for my carrier settings. It's just a regular iPod Touch without that :(.
Josiah
· 1 year ago
Okay, I think I'm an idiot but I'm very new at this...I started out with an unlocked, jailbroken 1.1.4 original iPhone, working on T-Mobile...I ran the program and after several tries finally got it pwned, installed 2.0 firmware...so now it starts up with the little pineapple on it, but it only goes to emergency screen, and iTunes says the SIM is not supported. Is there an unlocking process I have to do even after I pwn the phone? Sorry for my ignorance....
fuckin shit im runnin leapard,,,, hope they fix this tomorro
SCRIZZWALD
· 1 year ago
WORKED FRICKING CHERRY!! :) Thanks for your hard work. Really stoked on it!!
MRM
· 1 year ago
Just finished using Pwnage 2.0 on my 1st gen iPhone, with 1.2.0. Worked like a charm. Excellent work Dev Team. I look forward to the NEXT firmware update!!
Tommaso
· 1 year ago
I love you guysss
Brett
· 1 year ago
Hi Dev Team, I'm going to Thailand next week and was wondering if the app support patch and region patch was included or even needed in 2.x to work over there?
aar_44
· 1 year ago
Hey, when r ya gonna make a version for windows vista??? plz, plz, do it soon, I heard we`re gonna have to wait 1 more day, is it that true??? or will we have to wait more time??? Oh my good, I hope we dont...
any wait thank-u, so much for takin` care of this dev-team!!!!!
make the standard proxy.pac file, but store it in /Library/Preferences/SystemConfiguration, and you'll find the preferences.plist file there too, just make sure to change the address of the proxy.pac file in your edit to point to the right location... It works :)
Myte
· 1 year ago
WOW, i wanted to say that without your help, i would of been out of pocket 800$ and all for a buggy 3g phone, the 1st gen iphone is great. I am greatful for your commitment to achieving you set your minds too. that guys is BIG and will only get further as your lives goes. i would like to wish all the best for you all, and will all your dreams and asperation be true and god speed to anything as you want in life.
THANKs DEV TEAM, RESPECT to you all, with the deepest admeration.
Sparky
· 1 year ago
Still waiting, :( Hoping Windows version will be soon.
mindcrime
· 1 year ago
Hi! First for all, a huge thanx!!! I have a problem with the appstore on my iPodTouch (fw 5a347) : I am fench and the AppStore appears in English and don't let me download any app :-( Any tip? Thanx!
Brewno
· 1 year ago
Thank you a whole lot. You guys are awesome.
masterneo974
· 1 year ago
In expert mode after select the ipsw.zip file renamed in ipsw appear an error msg (Wrong firemare bundle selected)
Rich
· 1 year ago
Thank you. Watching it install was like opening an xmas present! Installer.app would be nice though, but at the moment I don't care. Thanks again.
a-sell
· 1 year ago
is there going to be a windows version?
zahnarzt
· 1 year ago
1a) Is it possible to unlock (answer "no" to legit) a iPhone 2G as an AT&T customer? 1b) If so, how do I activate? Is it a different process?
2) If an AT&T customer can unlock, jailbreak, and activate a iPhone 2G will the phone freely roam to any GSM (T-Mobile, etc.) signal or will it stick to AT&T, because that is the SIM card that I have installed?
smilerthecheshirecat
· 1 year ago
Congratulations on the success of you dedicated hard work and skill....
Thank you for providing us with the tool for making our devices "free" to play!
Highest regards from the UK
Jon
· 1 year ago
I have a 3.9 iphone 2G which has never been pwned. Do I need to upgrade my baseband to 4.6 prior to using pwnage tool? Can someone elaborate the steps.
I will seed until it gets up and going. Also looking for a solution to TMobile Edge on 2.0 let me know if you come up with any thing.
snoslicer8
· 1 year ago
T-mobile T-Zones hack works on 2.0, just SSH into preferences.plist.
xylene
· 1 year ago
hey guys. will this activate my iphone 3g which i bought through ebay. i bought it unactivated. i know the unlock is not out yet. can i atleast use it as a ipod touch after using this?
joshuacu
· 1 year ago
what is bootloader 4.6 and where do I get it? It keep directing me with this information.
Steve
· 1 year ago
You guys are amazing! Thank you so much, for all of your hard work!
smockonallama
· 1 year ago
Hey guys thanks very much. I have the utmost respect for all of you. I wish you all would take donations because I would love to donate to the cause. The 3rd update fixed my issues and my iPod Touch is restored and syncing right now with the fw. Take a big pat on the back from me and sit back and have a cocktail or beer. Thanks again, good night and have a pwesant tomorrow!!
Mike
· 1 year ago
on my black cored duo macbook the pwnage tool bounces like it is opening and then stops like it is opened but nothing comes up on the screen.
when I try to click on it, it just says pwnage tool in the menu bar on top but there is no screen.
any ideas?
thanks!
Vijay
· 1 year ago
Y dont u release a complete working custom firmware 2 that will unlock jailbreak and install in Iphone 1st generation? It will help all the windows users!!! Please do..
Thank you,
Dave
· 1 year ago
HOW TO FIX ERROR 6: just rerun the pwnage app, and then follow the instructions on how to follow through with the DSU stuff. make sure you hit NO for "are you a legitimate iphone user" because if you need it unlocked, thats what you need to do.
xxporkxsodaxx
· 1 year ago
Who has two thumbs and loves the Dev Team? Xxporkxsodaxx that's who.
Any ways, I have jailbroken my iPhone 3G but why can't I unlock and jailbreak my iPhone original, it says I have the wrong firmware bundle, I have downloaded it from multiple sites and I have made sure it was the official release but still nothing.
thedesmodus
· 1 year ago
same thing here on my 24" 2.16 iMac running 10.5.4 with 2Gb SDRAM. I cannot get past the Wrong firmware bundle message in the tool
raghupro
· 1 year ago
Finally a beautiful sunday gift :)
thanks a lot guys...
GT
· 1 year ago
iPhone locked up during Bootneuter - iPhone has an Apple logo of death and iTunes can't restore anymore stating "An unknown error occurred (1604).
MuscleNerd
· 1 year ago
The "flashing baseband" screen of BootNeuter can take several minutes. As long as you got past the "flashing baseband -- do not interrupt!" screen then you are 100% recoverable. Please visit irc for more interactive help, or visit some of the FAQs and guides that are coming out.
dewq
· 1 year ago
Good.. only for Mac gay OS ....
yeah
· 1 year ago
59 4F 55 47 55 59 53 52 4F 43 4B
iPhoneCoder
· 1 year ago
Hi, Apparently and definitely not confirmed by myself, iPhone1,1... restore files are for the iPhone 1st version phones. iPhone1,2... restore files are for the 2d version (iPhone 3G) phones.
iTunes downloads the 1,2 version for a 3G and the 1,1 for a original recipe iPhone. Just to clarify some of the questions. And of course, YMMV.
Rada
· 1 year ago
pwnage won't even start up it just bounces on my dock for a minute then it's acts like it stated but there is no window at all...
Bob
· 1 year ago
WORKS PERFECTLY GUYS....
minor note - my iPhone now runs warmer than it did when unlocked 1.1.4 using iLibertyX, although not as uncomfortably warm as when unlocked 1.1.4 with ZiPhone.
Richie
· 1 year ago
thank you so much
Mikael
· 1 year ago
I love u so muchhhhh!!! Thank u thank u thank u!!! I get my iPhone back!!!! I'm in Canada and accidently updated to 2.0. Now since the first version of the iPhone wasn't released in Canada, it was totally locked. 1 week without my iPhone. It's been crazy but now it's over. I could never thank you enough!! You guys are awesome!!!
blazened
· 1 year ago
Hi, I did the same thing and have the 2.0 version on my phone. Did you have to restore anything or did the software pretty much do everything for you ?
happy
· 1 year ago
Thanks so much!
Seems only Cydia installed for me (touch). Any way to get installer on there? Or get it from Cydia?
Awesome!
JT
· 1 year ago
First of all, thanks! Can someone please tell me how to disable edge in cydia?
InhexSTER
· 1 year ago
Nice fixed restarting problem on my 3G....everything is good now....WAITING FOR 3G UNLOCK!!!!!!!! Dev-Team you are the best...you can do it!
Vasu
· 1 year ago
I get this error when trying to build the custom ipsw. Any idea what this might be?
2008-07-19 20:19:53 -0700
EXC_BAD_ACCESS (0x0001) KERN_PROTECTION_FAILURE (0x0002) at 0x00000038
it won't start the application it just bounces on my dock and then sits there until it is forced quit... any form of help is appreciated. thank you
fixed
· 1 year ago
If anyone has error 6 or error 1600 all that you need to do is enter DFU mode the proper way when prompted. to do so its very simple, turn off your device. hold down sleep/wake + home for 10 seconds exactly then release sleep/wake and continue to hold home for 10 seconds. this will allow you to use the custom restore successfully in itunes without any errors especially if you have a device support folder made and empty in your username and itunes folder.
speckyboy
· 1 year ago
Hey Dev, Just wanted to know if there is a windows version anytime soon? Just asking. Im still happy for those who got their Jailbreak for Mac. Congratulations to all Mac users. Enjoy your new jailbroken iphone! But for the Windows users, will we ever get a pwnage tool as well? Or not even close? Just wondering. Nonetheless, Thanks Dev for all the work you have put in for the Mac users.
macgeek800
· 1 year ago
The trick was restoring my phont to virgin (empty) mode first, Then applying Pwnage to it :) All great THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Swank
· 1 year ago
Anyone on a 3G getting the "unknown error occurred (6)" when trying to restore the custom file with the phone in DFU mode I'm getting that error in iTunes.
I've tried both legit iPhone user and non-legit (I am legit btw). So I guess I'll just restore to the regular software until a patch comes out. Sucks to loose all that work into some of the dope-ass apps I've snagged up :(
Getting the "Failed to prepare x12220000_4_Recovery.ipsw" error. (did the mkdir attempt)
MuscleNerd
· 1 year ago
Please be sure you're using the double quotes, that directory name has a space in it. Also please be sure there's nothing in ~/Library/iTunes/iPhone Software Updates/. If both of those directories are empty before you start pwnagetool, and if the x1222 file exists in the ~/Library/iTunes/Device Support/ directory after running PwnageTool (but before running iTunes), then you should be good to go.
Taylour
· 1 year ago
Thank You so much for this release! One thing- how can I get my Tmobile Tzones hack to work without the installer app program? Thanks
Malcolm
· 1 year ago
thanks that worked great. now if only i could get a new screen without paying through the nose. My screen stopped working. this has been a hardware issue for a while. Finally it just doesn't work anymore. I can't believe it.
the PwnageTool is exceptional!! Great job all.
gsantamaria
· 1 year ago
I have a 1st Gen iPhone, I have upgraded to 2.0 using pwnage and everything worked out great
BUT now my Mail on my iPhone is NOT working. I touch the mail icon to load but it then crashes and doesn't load. Anybody know the problem?
Thanks :)
Nelly
· 1 year ago
Same problem here... Anybody know of a solution?
Bloglos
· 1 year ago
Same problem here as well. Someone please help.
ch
· 1 year ago
yep. thank you
Paolo
· 1 year ago
AWESOME WORK GUYS THANKS FROM VENEZUELA!
iMags
· 1 year ago
iPhone 3G: When I use the advanced-mode (don't change anything) I can't receive any signal. But if I use the n00b-mode I do receie signal! BUT I DON'T WANT THE FREAKINGLY UGLY PINEAPPLE!
Blake
· 1 year ago
Thank you! Thank you! Thank you!
I was updating my first generation iPhone (on T-Mobile in USA) from 1.1.4 to 2.0 and I experienced the 1600 error, and the failure to prepare error and with your advice, I created the directory the problem was fixed.
For a while I didn't realize I wasn't actually successfully entering DFU. I didn't realize the screen would be blank when this was successful.
The software functioned perfectly, thank you very much for all your hard work!
I'm off to mess with my new 2.0 unlocked and jailbroken firmware.
eirikraude
· 1 year ago
hello...i can't enter DFU, so i looked for “~/Library/iTunes/Device Support”, but i couldn't find it ... does that mean that i have to create it?.... can you please explain it?
GAtes
· 1 year ago
I have no service on my iPhone3G 2.0 after pwning phone
Cuervz
· 1 year ago
hi i just ran the Pwange i just download but it say i need to download an ipsw file and gives me the option to download it from the internet .. i i did that already but what now ?? plz help ! i cant stay without a phone any longer .. i was stupid and updated without thinking so i have the 7.7 iTunes and getting the sim card not supported message .. thanks for reading and thanks for the responses in advance
elguille78
· 1 year ago
just pwned my first generation iphone, and everything is OK, THANK YOU VERY MUCH DEV TEAM
Adrian
· 1 year ago
my phone is 2g. its stuck in DFU. someone please help
cez1
· 1 year ago
I can't get past error 6 and my phone will not go into DFU mode. My 2G iphone was an unlocked iphone that i accidentally locked trying to upgrade to 2.0. Sinc i have been playing with the downgrade and can get two screens; one with a usb to the itunes symbol and the second to allow emergency calls.
I've been through the program and the suggested fixes but I'm stuck guys and could use some help!!!
Thanks
ricardo
· 1 year ago
is there a pc version i would like to upgrade to 2.0 too please help
DB2008
· 1 year ago
Help!!! I can't seem to get past Error 1600. I tried Update 3 as instructed, but I still get the error - and when I go back to the Device Support file, the file that I erased: x12220000_4_Recovery.ipsw is back in there! I feel so close ... what am I doing wrong???
MuscleNerd
· 1 year ago
The x1222 file should be there after running PwnageTool. It's a modified version of what Apple would rather have there. Can you re-run PwnageTool and be sure the log panel doesn't show any errors related to that file?
Carter
· 1 year ago
Worked perfectly on 32gb iPod touch. Thank you !!!
zahnarzt
· 1 year ago
I am a legit (AT&T) iPhone 2G user and I want to stay on AT&T, but also want my phone to be unlocked. Is this possible? Will I have a tough time activating if I choose that I am not "legit"? Will this enable me to use T-Mobile also?
boggins
· 1 year ago
Tried to enter DUF mode. Screen black. Pwnage stays turn off phone. What do I do?
Banyuken
· 1 year ago
Thank you guys, awesome!
Joe Zeles
· 1 year ago
So I just bricked my iPhone. I restored my phone successfully with a pwned 2.0. However, once it started I received a message that my iPhone could not make or receive calls. At that point I tried to restore it again, and thats when everything went to hell. Now my iphone is stuck in DFU and when I try to restore I get the 1604 error.
Does anyone have any ideas on how I can correct this?
Thanks,
Joe
MuscleNerd
· 1 year ago
As long as you didn't turn off the iphone during the critical "flashing bootloader -- do not interrupt!" stage of BootNeuter, then you are not permanently bricked. 1604 is recoverable but it's easier to help you on irc.
Joe
· 1 year ago
Yes, I did let it get past that part. It completed the flash, but afterwards I got the 'iPhone needs repair' message. When trying to restore, I received the 1604 error.
Any help would be appreciated!
Thanks
LeeMajors
· 1 year ago
Awesome... Even the expert mode is really easy.
One suggestion is that the wording may not be quite as clear as it could be in the easy mode. I feel I'm a legitimate iPhone user and so selected yes. So BootNeuter wasn't installed and I couldn't activate my phone... got a bit freaked out for 30 secs.
Anyway... I just made a custom build in the end. :) :) :)
Nelly
· 1 year ago
I agree, Dev Team, perfect and beautiful application but the wording could have been better (I think my granny could have gotten confused) Regardless it worked.
For people having Mail.app problems, you can simply install terminal via cydia, then type login, then root, then alpine and then after it logs in type in (without quotes) "rm -fR /private/var/mobile/Library/Mail" exactly as spelled there and simply sync again with iTunes and it will reload all your mail stuff.
You guys RAWK!!!! I have been (im)patiently waiting for this.
I agree with one commenter on the irony of my desire unlock my iphone to use on t-mobile networks and the germans desire to use it on anything but t-mobile.
gotta love it. cheers
Jon
· 1 year ago
when launching, the icon just bounces in the dock. any ideas? ...the pwnage tool won't load
abráham
· 1 year ago
the tool downloaded fine. but...when i click it to open it from the desktop. it just stays bouncing in the dock forever and never opens. I have deleted it and downloaded it again..but still this second one does the same. Never opens...just bounces on the dock ....any suggestions?
Darkn
· 1 year ago
Come on man,. release the software for windows as well......
jon
· 1 year ago
Windows release please! :)
Dean
· 1 year ago
Problem on Original iPhone using 2.0 installed from iTunes. Pwnage creates ipsw file and I can select this from iTunes to restore. The restore process goes fine and iPhone restarts with pineapple now visible, but when it mounts in iTunes it says, "The SIM in this iPhone does not appear to be supported..." I've tried restoring 3 times now with SIM in and SIM out and every time get the same message. Any thoughts.....
MuscleNerd
· 1 year ago
In your case you need to be unlocked. In simple mode, tell PwnageTool you are "not legit". In advanced mode, select the "Activate" and "Unlock" checkboxes.
cocaine
· 1 year ago
How do you use this? Can anyone write up a tutorial? I downloaded all the necessary files. I changed the file name to the .ipsw, and its just the lego icon.. If I click it it changes the window to iTunes but nothing happens.. I see no pwnage tool or anything.. Help..
Nelson
· 1 year ago
Gracias desde El salvador :) Gracias!! ^__^
Carlos
· 1 year ago
Nelson en que red estas, en Claro funciono perfecto!! Saludos Carlos
Brevity
· 1 year ago
Nice one Dev Team
thinayr
· 1 year ago
Can't believe I'm the only one (I've found) having this problem:
Downloaded the .zip file, decompressed it. Double clicking the Pwnage Tool app causes it to bounce in the dock for an abnormally long time. The icon remains in the dock, with no Dock "On Light" No program windows appear, although clicking the icon in the dock changes the menu bar to "Pwnage Tool," with no other menus, and itself unclickable...
That's it. Any suggestions, peeps? I've re-downloaded, restarted, launched from the terminal, cried, drank, nadda.
spliffalicious
· 1 year ago
I HAVE THE EXACT PROBLEM
AND DRINKING DIDNT HELP ME EITHER.
I'm going at it again this morning.... Working from a back up iBook G4... what are you on?
punktilend
· 1 year ago
i wish i could say thank you but so far this app has not been able to work for me just keeps jumpin up and down im the bar.
desolateone
· 1 year ago
I've got a problem guys. I just got my ipod touch into dfu mode, but when I go to itunes, it will not see my ipod. So I cant restore. How can I fix this?
offspring107
· 1 year ago
its probably off, not in DFU mode, try holding down the power button and see if it comes back on, hold the power button and home button and it will force a restart
desolateone
· 1 year ago
i didn't come back on when I held power but it did restart when I held power and home. It put it in recovery mode.
offspring107
· 1 year ago
once in recovery mode you can try to put it in DFU mode again, turn on the device, hold down power and home for exactly 7 seconds, ( screen goes off between 7 and 8) then release the power button and hold home button till it shows up in itunes
PM me if you have further problems
desolateone
· 1 year ago
OK when I put it in dfu mode it says " iTunes must check the iPod software update server to identify this device. Should I do this?
offspring107
· 1 year ago
Yeah, sounds like itunes is not 7.7 make sure you hold down the option key to choose your own custom firmware, it might be the contol key or shift. one of them brings up the file browser
desolateone
· 1 year ago
Yes iTunes is 7.7, I can hold down the option key and open the browser, but after it extracts firmware, I get error 1600, and yes, i deleted everything in the Device Support folder.
offspring107
· 1 year ago
hmmm, are you going from 1.1.4? an error message in the 1600's is only obtainable in DFU mode so ur doing that correctly, Your default iphone software is found in library--> itunes--> iphone... delete the 2.0 or drag is to the desktop. now take the custom firmware and rename it to whatever it said in the itunes folder. If this doesnt work for you, I would downgrade to 1.1.4 to get it working. Pain in the ass, but i think you can get it working without it. I''m going to go through quick run through just to make sure your not missing anything...
1) open pwnage, let it scan for your iphone software ( the fact that you had to download it makes me think that you hadnt had it, or had been working with a beta of 2.0 . 2) run pwnage tool, it take a little bit, keep the lg window open if you are as unpatient as me. 3) once it is done it will go into a dfu mode tutorial, but you know how to do this on your own so put it in DFU mode and once itunes 7.7 pops up that it found an ipod hold down option and select the iphone custom firmware now on your desktop. itunes will try and load the software and you will see a pineapple on your screen. once your iphone turns on it will go to bootneuter, downgrade some stuff, then restart and you are good to go. Its 1:33 where I am and I will be asleep by 3, I'll check this post @ 2 to see if you got it working
offspring107
· 1 year ago
If that fails, try doing what the dev team said to do in their update and restart your iphone and mac after you do the delete
desolateone
· 1 year ago
I am going from 2.0 (earlier build the one ending with 5, not 7) which was updated from 1.1.4 which came with my ipod to jailbroke 2.0. Your first suggestion did work so far, i'm at the pineapple!! I think I had to restore and keep the name the same (iPod) instead of what I used. Then try it again. Now it is working fine so far. So thanks!!
offspring107
· 1 year ago
no problem, glad I could help
Chris
· 1 year ago
Just got this working after a bit of frustration with various errors. So I would just like to say... THANK YOU, Dev team! I really appreciate your work. :) And do know that a lot of other people do, too.
elliott
· 1 year ago
thanks dev team!!!!!
it didnt work until i created the device support directory and ran it in simple mode with my touch disconnected. the only thing im wondering is why was cydia installed and not installer.app?
Christian
· 1 year ago
Sweet, worked great!
fack you
· 1 year ago
WHAT THE FaCK? all this postponing, bitaching and NO FaCKING WINDOWS VERSION? FaCK YOU! and while im at it please make the next revision vista x64 compatible^^ AND FaCK YOU FOR NOT SAYING THAT THIS REVISION WILL NOT SUPPORT WINDOWS. FaCKING DaOUCHEBAGS and fack disqus. slow as motherafacker
Wendy
· 1 year ago
YAY!! For a Computer geek , this was not easy unlock phone, but success full!! Anyone stuck. Here' what I figured out. Go through the steps on tool. You will want to make sure you have downloaded two files. blt.39.bin and blt.46.bin. You can find links on this thread. It will ask if you want use firmware 2.0 click the icon and green check sign will appear. Next it will will ask you if want to search web for blt.39.bin(I think it's something like that), click no. Then it will ask you if you want to search you Mac. Say yes. go to folder and select the file. Repeat for blt.46.bin(something like that. Cannot remember exact name). Then it will ask you if the file can be placed on desktop. select okay. After file is created, you can stop using tool. Next you will want to put your iphone into DFU. Please see my post on how to stick it into that mode. Now go into you itune program and it popup with a message. click okay. Now you will see a button reading "recover". Hold down "option (alt) button on mac and click on the "recover" button. It will popup a window and you will want to go to your desktop and select the file you created in pwnage tool. Let it do it's trick and you got yourself unlock phone! Good luck!! THANK YOU DEV TEAM!!!!!!
dave
· 1 year ago
how do i install installer? not cydia
plumix
· 1 year ago
PwnageTool2 dont seem to start in mac os 10 please help ! it stay on the top menu bar ! can someone help me please ! thanks
curious
· 1 year ago
instead of telling me to get a mac, please answer my question.
is it possible to use pwnage 2.0 using vmware running leopard in windows?
magnumbreak2000
· 1 year ago
It failed to prepare the x12220000_4_recovery.ipsw I have no folder in Itunes called Device Support, or a file named mkdir Need help
BeauGiles
· 1 year ago
Sweet - worked 100% on my iPod Touch :-). Now we just need MobileScrobbler that works with 2.0
Thanks again!
Nate
· 1 year ago
I downloaded it but the pwnage tool just bounces up and down in the dock for a wile then stops, and then nothing happens. Am I doing something wrong?
jetlap
· 1 year ago
Thanks so much :)
Doodoo
· 1 year ago
How do I use it on Windows?
LOL! Just kidding. The problem I'm having is that once I launch the app it bounces a few times on the dock and then nothing happens. Did anyone have this problem? I'm on an iMac Intel, btw.
hey dev team when are u going to release the windows version?
twotwitch
· 1 year ago
is it possible to use pwnage tool using vmware running leopard in windows?
rofl
· 1 year ago
woot! it works! its a piece of piss to install but im surprised they didnt include the bootloader files. especially seeing as they are under 100k in size. ??
thanks fellas! =D
meowmix
· 1 year ago
Will the ipod1,1_2.0_5A347 work for iPod Touch? I'm afraid to use it. Thanks.
Dudeinator
· 1 year ago
Worked for me.
offspring107
· 1 year ago
worked like a charm, thanks dev team
David
· 1 year ago
man.....what the heck am I doing wrong??? I am on OSX but when I open the tool NOTHING happens...I cant even quit and have to force quit just to try to restart the program. Download half a dozen times and I cant get the thing to open!! Help!
Doodoo
· 1 year ago
I'm thinking it's the OS. Are you on Leopard?
twotwitch
· 1 year ago
is it possible to use pwnage tool using vmware running leopard on windows?
omgsideburns
· 1 year ago
You guys have done a WONDERFUL job. If anyone wants vacation at the beach let me know.
alfi
· 1 year ago
I... I love YOU!!! :D let me test the tool.... *g*
jorge
· 1 year ago
its not working! theres no application on my computer
oops., clicked legit iphone user, thought it was a trick, lol
stouter
· 1 year ago
thanks a bunch
tintinto
· 1 year ago
This works, Thanks!
mactogog4
· 1 year ago
hey help, my phone is locked, the install seemed to run ok with no issues, but my phone is locked :-(
Jay_L_Break
· 1 year ago
is it supposed to be building the IPSW for like an hour?
ramy
· 1 year ago
hi i have a veryyyyyyyyy important question i have a iphone 3g and i just need to unlock it and do you have any idea when there will be a new update to unlock the iphone 3g like an approximation? thank you ur help is greatly apperciated
Gates
· 1 year ago
i have a 3G iPhone using AT&T after pwning it i couldnt get any service on my phone, help?
Greg
· 1 year ago
Need Another Mirror? I use dreamhost and I have a few TB worth of bandwidth per minth left unused. email me if you are ok with it.
John
· 1 year ago
I got the "sim card not supported" error after the pwnage, but everything appeared to go well. In case anyone else gets that error, here's a hint on how to fix it.
You are NOT a legit iPhone user.... :)
Pete
· 1 year ago
I thought that original iPhone would unlock for non-ATT SIM cards when the software was installed. I was able to load everything ok, but when I try to insert my T-Mobile SIM card, it would not activate. It keeps telling me to sync with iTunes. iTunes won't let it activate since its not ATT. Please tell me that I'm missing something.
d
· 1 year ago
windows please a lot of people using windows
Squuiid
· 1 year ago
Can the created _Custom_.ipsw file be used with iTunes 7.7 in WINDOWS to Pwn a Phone? Does PwnageTool 2.0 do anything in the background whilst the restore is taking place, or is the DFU guide, just a guide?
If so, I could FTP my bro the custom .ipsw as he is on a PC and has no access to a Mac!
Jay_L_Break
· 1 year ago
is it supposed to be building the IPSW for like an hour?
SDP
· 1 year ago
I have carefully run through through this a few times now, I get a successful restore of the 2.0, but then itunes says no go and asks for a different SIM. I am using a 1G from 1.1.4. I have managed to downgrade from 2.0 to 1.1.4 so have had some luck with unlocking previously.... Phone is now locked. Please help!?
It seems to effect Macbook and Macbook Pros... might be a bug
Thanks
lamedude
· 1 year ago
post links to .ipsw files, COCKSUCKERS this will avoid moaners comments. FU CK WIN XP version, get to someone with a mac and unlock your GAYPHONE there. IDIOTS. your mom sucks and your dad swallows. thanks
L.E
· 1 year ago
Thanks Dev-Team...I waited patiently and I was not disappointed
wolfgang
· 1 year ago
you guys are fucking amazing. thank you, so so so so much.
Dudeinator
· 1 year ago
@MuscleNerd
Thank you. After all the shit the folks gave you this week, for you to STILL be working your way through these comments, and giving genuine help the those running into issues... well, that's just downright impressive.
One Full Golf Clap to you my friend.
Personally, I did not have any issues. Everything went as planned for me. Thanks for the tool, too!
djamo
· 1 year ago
MY iPhone (2g) is stuck in DFU. please someone help!
Golian
· 1 year ago
I was able to load the Pwnage onto my original iPhone. However, I am unable to use my T-Mobile SIM card. I thought that the software would still unlock for non-ATT SIM cards. Am I missing something?
Rob Giacomini
· 1 year ago
Expectations exceeded. Great job team. 2G phone previously unlocked and jailbroken by anysim (v1.1.1), then 'upgraded' using Ziphone (v1.1.4) - and been without WiFi since then (March '08!!!). Now, thanks to the dilligent efforts of a bona-fide group of software developers, I have my Wi-Fi back, on v2.0 of the software, everythings works. I'm over the moon. Many thanks to the whole iPhone-Dev team and also skr3dii for the detailed step-by-step instructions at http://www.macgeekblog.com/blog/archive/2008/07...
cleo
· 1 year ago
thank you! It was tricky getting into dfu because itunes would open and interrupt it but when I temporarily put itunes in the trash dfu worked great.
Thank you!
boggins
· 1 year ago
Please help someone....
I tried to put my phone into DUF and the screen went and stayed black. Pwnage Tool didn't recognise DUF and itunes says the phone needs restoring but gives a 1600 or 1601 error when I try to do it.
Am I screwed?
blairpod
· 1 year ago
Does anyone have a pwned ispw for iPod Touch 2.0 that they can post somewhere (Demonoid, ThePirateBay)
djamo
· 1 year ago
my iphone (2g) is stuck in DFU mode. (with the connctor and iTunes icon), and now it seems to be retarting itself on its own. can someone help?!?!? please!
Aaron
· 1 year ago
everything went successful, until itunes finished restoring with the custom firmawre. Then it was still locked with the "Connect To itunes screen" And i plugged it in and it went to AT&T activation. Any ideas why this happened?
Window
· 1 year ago
Do we have to wait along time for getting Window version???
HomeGrown
· 1 year ago
Thanks a lot i love u'll!!
boggins
· 1 year ago
Update on my previous post.....
Itunes does nothing now when I plug my phone in.....It's like it doesn't exist.
I am starting to feel sick.
Anyone with ideas?
MuscleNerd
· 1 year ago
I know the feeling but I know by your description of events that you are nowhere near bricked. Please visit irc if you can for interactive help.
Joe
· 1 year ago
I've never really used IRC. Can you tell me what server and channel to go to?
pumpkin
· 1 year ago
irc.osx86.hu, #iphone :)
someone will be able to help, if you ask nicely :)
Simoes
· 1 year ago
Hello im trying to restore and always give me the Error 1600 and i check the update 3 and do all the things, Can somewone help me?
Good Work Dev team im trying...
nikeunltd
· 1 year ago
good job guys! thanks for the release, even though in NYC it was 5 hours before sunday!
Just wondering, this only supports Macs right?
Endoplasmic
· 1 year ago
***** IMPORTANT *****
Your OSX has to be UP TO DATE when doing the 3G pwnage. (I had no idea there was an update to OSX until I went to Software Update)
I made the "Device Support" in both my user Library and my system Library directories.
I'm currently watching the pineapple do it's thing on my phone so I assume things should move along nicely.
Jack
· 1 year ago
very nice, was waiting for this..
moses
· 1 year ago
thank you,
Nice one DevTeam!!!!
please add version for windows
Jay_L_Break
· 1 year ago
is it supposed to be building the IPSW for like an hour?
bill
· 1 year ago
tanks for these grat tool just one question when it gonig to be the pc one?
RojoMo
· 1 year ago
THANK YOU!!!!! You Guys and Gals ROCK!!!!!! It works Perfectly!!!!! I love the Intertubz!!
Omid Massali
· 1 year ago
This is just plain awesome.
syo
· 1 year ago
Nice work ... will there be a windows version soon ?
jonm
· 1 year ago
Well, I have an 8gb iPhone original that was updated to 2.0 when it was officially released. I've tried the tool, with a mkdir, verified it was there via terminal. No luck. I wonder if the issues is due to the fact that I'm currently running 2.0.
The DFU mode isn't a pure black screen in 2.0, but the recovery globe and usb cord. I am running Leopard.
Anyone else see this?
Pattryk
· 1 year ago
hi, I have a problem with creating the file from pwng... almost finished and error 'asr crashed'.
Any ideas?
Thanks
jose miguel
· 1 year ago
thanks a lot, now my 1.1.4 ziphoned phone is updated to 2.0 and also the baseband !! Thanks from mexico...
andrew
· 1 year ago
well it upgraded to the 2.0 .. but then relocked my phone ..
the bootneutral didnt automatically do anything...
So i guess i'm screwed now?
maybe this jailbreak only works for US based phones ?
I'm in canada ..
ramy
· 1 year ago
comon release a 3g iphone unlockk ppl on zibris site calling you guys all talk no show you need ot release a unlock quickkkyyyy
Duluxanon
· 1 year ago
ive noticed since pwning my iphone 3g - i am no longer able to hold down my finger on an app then remove it - the little X to remove it has gone. Anyone else had this?
Vince Ketchum
· 1 year ago
no more installer?
Amanda
· 1 year ago
you are awesome!!! but is there going to be a PC version?? thanks!
Paul
· 1 year ago
Hi all,
I have just woken up in Hong Kong to find a nice little present waiting for me.
I was lucky enough to get the new iPhone 3G on Monday and so gave my wife my old jailbroken iphone (used ziphone) at 1.1.4 version.
When I saw that you could not get installer yet, I decided I did not need mine broken as all I wanted was the installer app to get some old apps that I used to have like SMB and lexitron (love that game )
So I downloaded the pawnage tool and the restore versions along with the bootloader versions. I unzipped the bootloader versions.
I then turned my wife's iPhone into DFU mode and docked it. I then ran the pawnage tool and selected the correct formware and found the 3.9 and 4.6 bootloaders. It then made the firmware no problem and then it said it failed to get into DFU mode and asked if I wanted to try again, I said yes and it allowed me to turn off the iPhone and then it fired up and gave instructions on screen to get it into DFU mode which I followed and then all worked OK. It takes about 10 - 15 minutes for the restore process to work and you get several message in itunes along the way telling you what is happening.
The iphone then fires up and bootneuter does it's work.
It then resets one more time and all is OK, one jailbroken 2g iPhone with ver 2.0 firmware.
It then also allowed me to put the apps I had purchased at the app store for my 3g iphone onto my wife's phone. Everything working OK, no problems with mail or safari wihch I read has been a problem for some people.
All in all, my wife is now very happy and is playing bejeweled as we speak. She misses lexitron alos but we can wait until someone upgrades this for 2.0 or it get onto the app store...
cheers dev team,
Paul
Chris
· 1 year ago
I used this tool, however, I have T-Mobile (US), and it is still saying that I cannot use the iphone with an unsupported carrier... any suggestions?
0x3333
· 1 year ago
would be great to have a option to pwn the iPhone/iPod without to build the IPSW...
boat110
· 1 year ago
Thanks!!!! So Much... Can't Believe how easy it was!!!!!
Carlos
· 1 year ago
Thanks Dev Team, confirming it works fine here in El Salvador with Claro
nosewheely
· 1 year ago
Thanks from Belgium, well done
Marvin
· 1 year ago
Strange, my Wifi reception is very bad now... Any known issue ?
Dutchess CEO
· 1 year ago
Thank you soo much guys!! one question, where are all the applications? and the installer icon
Andrew
· 1 year ago
you guys rock!! keep up the great work!!
diggshane
· 1 year ago
heeeee hawwww
mred
· 1 year ago
thanks, SO much, from a californian traveling in india and needing this unlock!
me
· 1 year ago
sorry for my silly doubt, but how can you get iPhone 3g without a contract. also once you get without contract, whats the use of unlocking, what does it unlock ?
me
· 1 year ago
oops. i got it .. i mean unlock as in we can connect to any other network, anyways in Us there is t-mobile thats all. Anyways the question is anyways you will not break your at&t contract isnt it . Or can we take an iphone from at&t and terminate early .. i mean whats the trick here.
I had to pull it down before the men-in-black came a' knocking. Try a search on The Pirate Bay ;-)
Lloyd
· 1 year ago
iPhone unlock for all us windows users please! =]
Pedro Figueiredo
· 1 year ago
Thank You Very Much, iDev
A hug from Portugal to all of you.
Paul
· 1 year ago
Help - I accidently upgraded using the new 2.0 firmware (the one Itunes automatically downloads after you get into DFU, on my 2G iPhone.
Basically I didnt realise you had to to hold Alt key and select the special firmware file.
Now the phone is just locked with version 2.0 firmware.
Anyone can advisde to how fix my stupid mistake?
Craig
· 1 year ago
I would like to thank you all for your outstanding efforts. Having just moved from the states to Australia. Doing an unlock was needed. Then I stupidly upgraded to the 2.0 software without waiting until an unlock was available. It's great being able to use the iPhone again.
vampyren
· 1 year ago
It does not matter that u have original 2.0. I also made a misstake to restore to 2.0 and afterwards i used the tool and now its jailbroken. Work either way. GL
Chris
· 1 year ago
Make sure you click "NO" to legit iphone user if you are not using your country's supported carrier!
Luke
· 1 year ago
when preparing my update with Pwnage i clicked "yes" to legit iPhone user when i should have clicked "no" because i'm not using an ATT Sim. now i can't get it to restore with a correctly built IPSW. i can get the phone into DFU but it is constantly giving error 1600, if i try to downgrade to 1.1.4 it gives me other funky errors.
anyone do this or know how to fix my mess up?
Yan
· 1 year ago
Pwnage Tool is not launching on my iMac. Anyone else have this problem?
Yan
· 1 year ago
Doesn't work on my iMac with 10.5.4, but works fine on my MBP with 10.5.3
iphonefan45
· 1 year ago
hey dev team when r u going to release the windows version?
So I ran pwnage, and everything went well. But I got the error referred to in update 3. So i tried looking for the directory it says to remove files from...but I can't find the directory on my mac. So could someone help me? I need to locate "mkdir '~/Library/iTunes/Device Support'."
Any assistance would be GREATLY appreciated!
fshalabi
· 1 year ago
Just had one question...can you cancel the internet "media package" that is mandatory with activatioin once you jailbreak the iphone 3g?
Rahul
· 1 year ago
I had downloaded software but it didn't work in windows plz release the windows version also.
Mike
· 1 year ago
Works nicely, but ARGH! T-Zones hack is no more! I copied over the preferences.plist and proxy.pac and it is a definite no-go. Anyone have success?
evan
· 1 year ago
Mine is working fine. I restored my iPhone so my originally modified preferences.plist file was restored. I then uploaded the proxy.pac to private/var/preferences
mrklippel
· 1 year ago
Hi,
i think i found a minor BUG
the rootpartition created will be MAX 520 even if you set 2049
grtz, mrklippel
Dread Pirate PJ
· 1 year ago
Thanks! Trying it first on my iPod Touch, then on my 1st Gen iPhone.
Raj_india
· 1 year ago
Hey Guys i updated to 2.0, and while flashing the bootloader it took too long and i thought my iphone was stuck and i rebooted my iphone and now it just shows a apple logo. any idea how to correct the issues?
erotmica
· 1 year ago
Has anyone gotten this to work with t-zones?
Samuel Jackson
· 1 year ago
Once again THANKS for a HUGE amount of work. I can't even imagine the total man hours that went into this.
mike
· 1 year ago
i have not had much luck, everytime I do it my iphone starts to reboot over and over again.
Leebo
· 1 year ago
No this is just bouncing in my dock and Ive downloaded it 5 times from differing sources just to make sure. As another poster mentioned this is is just being ignored and Im wondering if someone from the Dev team can just leave a comment to say you're looking into this. Im running an iMac 20" 2.4ghz Intel core 2 duo with 3gb ram and 7.7 Itunes. I m struggling to believe that my system cannot handle this new app?
If you are in need of another mirror , feel free to let me know. I have a 100 mbit dedicated server I just moved all my sites off and still have running if you want.
Harish Mallipeddi
· 1 year ago
For anyone who wants more detailed instructions on how to go about using Pwnage, this might help:
This tutorial was written for Pwnage 1.0. But most of the instructions still apply. I more or less followed these instructions and got my first-gen iPhone upgraded to 2.0.
Mark Iv
· 1 year ago
Thanks a lot for the tool guys...this rocks.,,, I went through the process and jailbroke and activated the iphone(I have 1Gen Iphone which was already on v2.0) I think I have unlocked it as well, according to what the tool should do, but not sure if the phone has been unlocked. How do I verify this? I popped the ATT SIM out and tried another SIM, when I did it the iphone wet to the Emergency screen(showing USB cable and iTunes image) Any thoughts on why this is happening and how I can verify that the unlock also successfully happened? Thanks
evan
· 1 year ago
When the iPhone rebooted did it immediately run BootNeuter? You need to make sure to select NO when asked if you're a legit iPhone user if you want to unlock.
Samer Abraham
· 1 year ago
Guys, You need to release instruction on how to use this tool. I have been messing around with it for five hours and it really messed up my phone. I have now to go the painful way to downgrade to 1.1.4
Antra
· 1 year ago
awesome!!!!!!!!!!!!!!!!
tefat
· 1 year ago
Thank you to the dev team ... youve done so much for us all !!!!!!!!
And thank you cimkeri for your experience with the pwn tool.
Thanks once again !!
Taysh
· 1 year ago
hey guys I am having a problem when opening up the program. I have a new macbook running leopard and after i unzip and open the program it just keeps bouncing on the dashboard and then just freezes. Is anyone else having this problem?
darkman738
· 1 year ago
I follwed these steps, created the directory “~/Library/iTunes/Device Support” , and placed my phone in DFU mode and I recived both common errors listed here the : unknown error (6); and Error 1600 I atempted to restore on both a windows, and mac computer with no luck. I atemped in restore and DFU mode pre and post creating “~/Library/iTunes/Device Support,” with no luck. As of right now I am still reciving unknown error (6.) I have the 3G. Running OSX 10.5 and iTunes 7.7 (obviously since i have the 3G.) I thought I had bricked my phone, but than god I was able to restore it! Please feel free to contact me, dev team, or anyone else, and I'd be happy to work with someone to resolve the problem.
jade
· 1 year ago
After you have been through the process, there's a pineapple that comes and goes on the iphone screen? Is that right or wrong? When does it go away? Has something gone wrong?
Sagres
· 1 year ago
thank you. i will pay it forward.
jondus
· 1 year ago
Got T-zones working on two phones with this method.
I'm getting a 2005 error on my iPod Touch. I never got into DFU mode and now it's stuck in recovery mode. I tried rolling it back to the regular 2.0 firmware and that's what gave me the 2005 error. Before that I was getting error 6.
Jefe
· 1 year ago
Ok it took me a couple times, and had to read these posts, but I finally got it.
I think the two thing that have to be stressed to new jailbreakers are:
1) YOU HAVE TO GET THE IPHONE INTO DSU MODE 2) YOU HAVE TO CLICK THE ALT KEY, AND RESTORE BUTTON AT THE SAME TIME TO BROWSE FOR THE CUSTOM IPSW FILE. Not the Apple key, the ALT KEY.
Nice work Dev Team!!
selectiveinsomnia
· 1 year ago
Guys Thanks for the tool...it works like a charm...Jailbroken(with Cydia app) and Activated on ATT My only question is how do I verify that the iphone(1st Gen) is really unlocked? When I popped out my ATT sim and used a diff one the phone seemed to go back to Emergency screen with USB Cable and Itunes image as if the phone was not activated and not unlocked. Please help
Matt
· 1 year ago
Help! When i try to restore i either get a error 2005 or a error 9 in itunes.
Santiago
· 1 year ago
I'm having an issue with the Wi-Fi connections. It keeps reloading the connection, sometimes my network appears as unsecured (while it uses WPA security), and although it appears to connect, then refresh again the WiFi networks list and is disconnected again... Any clue?
CharlieHustle21
· 1 year ago
Hi everyone, I am a new iphone user!!! I want to say thank you to the Iphone Dev Team for all ur hard work, thanks!! Second I have no idea how to even get started to unlock and jailbreak my phone??? I jst checked my itunes and it says it is ver 7.7 I downloaded the pwnage tool, i have no idea what to do with it and what to do with my itunes and phone, i have read something about DFU mode, i have no idea can anyone please help i just converted from a palm Treo and hope that all you awesome Iphone users can walk a newbee thru this!!! THANKS!!!
Fester
· 1 year ago
I see a lot of people getting "unknown error 6" message.
I have a AT&T account with a 3G. I successfully made an image with both modes (smart and dumb) with activate enabled and disabled and with the option to not do the security wipe on and off.
I've tried everything and I have 7.7.43 iTunes plus Leopard with no available software updates for the OS.
ALex from suberbia
· 1 year ago
im having some problems everything goes well until it say have you used pwnage before and if i click yes it will say its done but nothing happens if i click no it say i hav failed????
anyone else know how to fix it??????
sid
· 1 year ago
Thank you soooooooooooo much....We all love you DEV-TEAM. Cheers!!!
kirch21
· 1 year ago
does anybody know when it will work for windows?
TOUCHMANIAC
· 1 year ago
Do I have to upgrade my ipod touch to 2.0 for doing 2.0 jailbreak???
Dudeinator
· 1 year ago
Yup.
But it's not hard... or expensive.
Google wold be your friend right now. (hint hint)
MagnumChaos
· 1 year ago
Would I be able to do this safely through a Virtual Machine running OSX? OR would that just be dangerous, itself?
craigz
· 1 year ago
Worked perfect for me, original iPhone, ssh up and running, all is good. I *do* love Sundays! Thanks for all the hard work. Great release!
ayahuasca
· 1 year ago
I don't have a connection to atnt anymore... anyone else have similar problems? I'm on 3g iphone.
JigaNet
· 1 year ago
Thanks from Colombia!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DON'T INTERRUPT THE BOOTNEUTER OPERATION WITH ME IT LAST ALMOST 20 MINUTES
The message during the update said it will take 2 minutes and since it took more than that, I rebooted my phone and now its a brick....any help/idea as to what to do next will be highly appreciated.
TOUCHMAN
· 1 year ago
DO I have to upgrade my ipod touch from 1.1.4 to 1.2.0 for doing 2.0 jailbreak???
Timpo
· 1 year ago
Cheers guys, great work. Works brilliantly for me!
funkymo
· 1 year ago
Thks for job, sound like it's work for everybody .. Maybe I m not lucky because for me, when I launch the .app , the icone bounce into the docks and then... NOTHING. Did I miss something? I use a macbook Pro with 10.5.4 Somebody can help?
mac(H)acKer
· 1 year ago
Usually, on Sundays we were praying for God ... Now we gonna pray for guys of Dev Team !!!! ;) I installed your stuff and it works GREAT !!! You've done an excellent work !!! Congrats from Paris, France !
a happy guy ...
mac(H)acKer
· 1 year ago
WE LOVE YOU GUYS !!!!!!!! DEFINITLY !!!!!!!
tl
· 1 year ago
Thank you iphone-dev team for your commitment and your hard work!
haru1ove
· 1 year ago
I haz success! After few trials.... I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes, and 122220000_4...something on Pwntool.
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device. hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!) Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
haru1ove
· 1 year ago
I haz success! After few trials.... I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes, and 122220000_4...something on Pwntool.
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device. hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!) Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
yoyoman
· 1 year ago
ok, this is getting scary now. I have a black screen on my iPhone, and a regular restore won't even work. I get the error: The iPhone "iPhone" could not be restored. An unknown error occured (1601).
Anyone else get this?!
Bob
· 1 year ago
Hold the on switch AND the home button together until the itunes logo appears for as long as you have to. THEN open pwange.
Can anyone confirm that they have T-mobile T-Zones proxy setup working? This is the last thing preventing me from updating... don't want to break internet (although WIFI will still work).
BMAN
· 1 year ago
can someone please help me i BRICKED my phone...
Enrique
· 1 year ago
Awesome!!! Thanks to all iPhone Dev.or for the fabulous development and testing!!!
haru1ove
· 1 year ago
I haz success! After few trials.... I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes, and 122220000_4...something on Pwntool.
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device. hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!) Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
Lore!
· 1 year ago
Thank u! It works without any probls! But.. there's a way to go back to the original boot logo?
Kyle
· 1 year ago
can you use the same custom .ispw that was created using the tool for other iphones, or do you have to go through the same process as described by cimkeri and others
666
· 1 year ago
I dont need to unlock it, but it will be nice to have a jailbreak , like before, using your iphone, pointing to a website, and voila!!!!
THNKS
Dominic
· 1 year ago
Cydia does not work for me, when i try it as soon as it opens it crashes. I had problems with mail.app but solved them by doing a full one hour erase to clear all settings. However the erase did not fix my cydia problems? What should i do
Marc
· 1 year ago
Has anyone else had a problem with cydia. when i tap it it flashes and then the program dies. Im using it on my touch. I used 5a347 and I used the simple create and advanced create custom firmware. Both Times this happened. Any ideas?
Dominic
· 1 year ago
Hi, great work!! But Cydia is broken for me, it crashes as soon as it starts. I had problems with mail.app but fixed them by doing a full one hour secure erase of settings. Any tips on how to fix cydia?
BMAN
· 1 year ago
someone please help me... idk what i did i gotta be on a plane in 5 hrs and i need to get this thing working!...
i dont even see where im posting :-(
DRP
· 1 year ago
Where I'm from I dont need to be on a iPhone sim contract. I bought a iPhone 3G outright. Then pop my vodafone sim card in and have signal!!! Sweet! I then used PwnageTool 2.0 to build a custom firmware. I have tried both yes and no to the "Is this a legit iPhone" question. I have also tried enabling and disabling active from from expert options mode. Both situations same thing I think. Problem is after flashing the custom firmware I no longer have any reception. No ability to call anymore. Anybody else had this and know how to fix it?
Ram
· 1 year ago
For folks who may still be confused, use this tutorial
I can't put my iphone in dfu mode. it keeps on going into recovery mode when i try. i get the 'failed to enter dfu mode' after it creates the ,ispw in pwnage, and i tried creating the folder 'device support' in itunes (cause the terminal didn't work) so someone please help i keep getting error 6 in itunes!
isotonic
· 1 year ago
I seem to have restored my phone to un-activated.
After going through all the steps and restoring the phone to the new ISPW in DFU mode, I can now only make emergency calls. iTunes gives me the following error: ----- The iPhone "iPhone" cannot be used with iTunes because the information required for activation could not be obtained from the iPhone.
Check that the sim card is inserted in your iPhone and that it is not PIN-locked. ------------ Yikes. Should I now try a different unlock?
mateus braga
· 1 year ago
It works very fine. Dev team we love you guys.
Brazilian Iphone now works 2.0
erotmica
· 1 year ago
Has anyone gotten T-Zones to work?
bensen
· 1 year ago
ive here some more european (germany & austria) mirrors
my iphone 1st gen. flashes with the pineapple logo screen going on and off for like 10 minutes after the custom restore...what happened?
L_Lawliet
· 1 year ago
Woot!
Sam
· 1 year ago
I just run the app and after a few tries I get the same result..... :( "The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please inter the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card" My iphone is version 1 and it worked ok with my cellphone provider, now I have a locked iPhone and I can't downgrade .... Help!
offspring107
· 1 year ago
Dev Team, If you need someone to provide FREE tech support to your users via email, let me know
optikalefx
· 1 year ago
Any solution to bouncing pwnage? it never loads on my mbp?
Jens
· 1 year ago
it worked like charm... Thank you guys for your great work! take you a couple of days off! then hopefully we can see a unlock for the 3G as well!
Thanks Jens
Cuervz
· 1 year ago
Thank you thank you thank you u guys are genious!!!!!! i truly apreciate it .. do u happen to have a Paypal Donate thing ????? i couldnt stay without my phone for any other day ... so .. thnks again !!!! Cancunino
tom
· 1 year ago
Wierd, a cartoon of steve jobs speaking something in a russian-type language showed up on my screen after putting it into DFU mode. what on earth does that mean?
nick
· 1 year ago
It works for me!!! Booyakasha!!!!
lukespost
· 1 year ago
Hey im having trouble with the 3G install Can someone post a step by step instruction for someone like me who doesnt know a whole lot about the tool. I have the 3G iphone that just came out recently thanks heaps guys
noobatron hackzoarer
· 1 year ago
can we all admit that this is not as easy as ziphone?
Matías
· 1 year ago
It worked! Thanks
jaxs0o
· 1 year ago
I'm having trouble pwning the ipod touch ipsw, here's what i get in the log:
2008-07-20 00:39:30 - Detaching root filesystem from '/Volumes/BigBear5A347.N45OS'. 2008-07-20 00:39:32 - OK 2008-07-20 00:39:32 - Converting root filesystem to UDZO image. 2008-07-20 00:42:43 - OK 2008-07-20 00:42:43 - Scanning root filesystem with ASR. 2008-07-20 00:42:43 - FAIL ------------------------------ 2008-07-20 00:42:44 - Failed to build custom .ipsw file.
any idea of what went wrong???
Ops
· 1 year ago
really sad that it only works on a mac, happy though i dont own a mac
pc man help us out
jdesorme
· 1 year ago
Thank you very much Dev Team, for an excellent product!! My experience: I got Error 1600, and followed the instructions above, deleting the file I found in the folder "Device Support" within User/Library/iTunes. One piece of advice: To put iPhone in recovery mode, I followed the instructions found in Step 9 of the iClarified Tutorial for Pwnage1.0 (http://www.iclarified.com/entry/index.php?enid=893). Step Nine You will be asked to connect your iPhone and put it into recovery mode. The easiest way to do this is to hold down your Sleep/Wake button for 3 seconds. The power slider will appear. Slide this to the right to power off your iPhone. Then hold down the Home button as you connect the iPhone to the dock. After a few seconds the recovery screen will appear. (iTunes logo and cable). Step Ten PwnageTool will then let you know your phone is being pwned and to please wait for a reboot. I hope this helps.
Then the DFU fail screen will no longer show but a step by step how to get into DFU will be shown in pwnagetool. Just follow that and you will able to complete the process.
iHacker
· 1 year ago
Dude you guys are great! Thanks for all your hard work!
cruzed
· 1 year ago
MacBook Pro, the same! the icon bounces and when it stops no window appears!
lukespost
· 1 year ago
Hey guys i have the 3G version and im getting stuck im really new to all this Could someone please post an easy to follow step by step instructions to install the pwnage tool for the 3G versions
Now I'm stuck in recovery mode, (the cable going to the iTunes icon on my 1st Gen iPhone) and can't get into DFU. The phone won't switch off. Just keeps rebooting. Can anyone suggest something? I'm at ctbritt@gmail.com. Thanks please!
rarias
· 1 year ago
Guys, I can't believe this... you are gods... Thanks so much for this. I love you!!!!!
jaysoo
· 1 year ago
After the unlock, i cannot connect to the internet?
jp
· 1 year ago
Thank you! It took me a few hours to finally figure out what I was doing wrong, but yahoo it's done. Just some advice for those having troubles with it. Start by putting your iphone into DFU. Then use the PwnageTool. If the phone is not in DFU mode before you use the Tool then you will continuously get the error message. Thanks again for the incredible work. JP
blairpod
· 1 year ago
Does anyone have a pwned/jailbroke iPod Touch 2.0 ispw firmware that they can post somewhere? (Demonoid, ThePirateBay etc...)
No mac (yet), so no Pwnage Tool for me :-(
Bruce
· 1 year ago
I cannot get it to activate or unlock i followed the easy step by step process Pwnage 2.0 showed me but after the restore with custome it s still in connect to itunes i use t mobile on a older i phone .. PLease Help Me Dev Team
.. PS I Might have done something wrong >/ I also have donated to you guy . Thanks in Advance
Bob Schmoe
· 1 year ago
great work dev team! in the meantime, i'll be waiting on that iphone 3g unlock! ;)
norberto26
· 1 year ago
THANK YOU VERY MUCH, DEVTEAM!!
Griffin
· 1 year ago
LOVE YOU GUYS RIGHT NOW I SEE THE PINEAPLE LOGO (GRAY) AND IT"S BUSY RESTORING
itaddams
· 1 year ago
Thanks to you guys, I'm closer to iphone nirvana. Thank you for your hard work. My only problem is that the custom image installed Cydia, but the Opensource Installer, and I can't seem to get the correct ssh password set (alpine doesn't seem to work). Any help would be appreciated.
fryke
· 1 year ago
After some initial looparound (had to mkdir that dir), 2.0 installed fine on my iPhone 2G. The one-week wait is over and I'm a very happy camper. Missing some old hacks and tweaks, though. The Kb-Hack mostly, because I type far better than my iPhone thinks I do. Thaaaaaaaaaaaaaaaaaanks, dev-team!!! :) :) :)
JunSeok
· 1 year ago
Thank you very much!
This tool works fantastic.
ROBERT
· 1 year ago
FREAKIN A THIS SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!! WHEN IS THE WINDOWS VERSION COMING OUT ??????????????????????????????????????????????????????????????
lukespost
· 1 year ago
??
Samer Abraham
· 1 year ago
Guys,
I spent over 7 hours trying to unlock this damn iPhone. After a lot of trials I succeded in getting the customized software on the phone. Now when I start the phone I have a Pineapple not an Apple and the phone is working but it is unlocked.
I have a T-Mobile card which worked perfectly before with my iPhone G2 and now I do not see any bars up and I only have a dial up pad for emergency and the iTunes says I have unrecognized SIM card. Though the phone is PWNGED using your tool.
How you fix this issue now?
moo
· 1 year ago
i hope you're not using iphone 3g cuz it's not working for that right now
djacka
· 1 year ago
For anyone who is having trouble installing the Pwned 1.2.0 software through iTunes please note that the use of a GENUINE connection cable can make it work. I was using a cable I got off eBay for charging and found that as soon as I replaced the cable with the Apple supplied one (Plugged into the back of the iMac, not the keyboard) all was good. Thanks heaps Dev Team. You guys rock. :)
Bucko
· 1 year ago
Thanks for all the hard work! It took me a few goes, but I finally got it.
k1k2k3
· 1 year ago
hello...... im gettin error 1600 and i tried typing he update 3 in terminal and clicked enter [ return] and it says no file exsist.... could some1 please guide e for this??
noobatron hackzoarer
· 1 year ago
how the hell do you put the restore you iphone from itunes from the custom made backup ? i tried alt and the command key is their something i'm missing? please help Ctizzle6713@mac.com
Dave
· 1 year ago
Bugreport: MecBook 2,2 GHz 4GB RAM 10.5.4 7.7 App ounces in dock for about 20 seconds. When i click Apple -> Force Quit i can see that the app still responds (it isn't red) After starting the app the icon lives in my dock but it has no blue running dot underneath it.
Did a system restart made the device support folder restart changed systemlanguage to english
help would be appreciated :D
Thanks or your work dev team!
Zarathustra
· 1 year ago
I downloaded the 2.0 from Itunes but can not find on mu Mac! Anybody know where?
moo
· 1 year ago
you should find the file link from the web and save it to your desktop
Ikarus
· 1 year ago
Bricked my phone, and seriously worried (tomorrow is a working day), then I read in a local forum that I should tick "No", I'm not a legit user (Doh!).
All working now, thanks very much to the Devteam. I always find it interesting how many times you have to get things wrong before you actually follow relatively simple, clear instructions!
You guys rock.
Flokke
· 1 year ago
THANK YOU VERY MUCH DEV-TEAM!
Thanks for spending so much hours and effort to the new PWNAGE programm. Now my 2G has 2.0 and yes, I love sundays too! :)
Unicum
· 1 year ago
Thank you so much for this GREAT work
Unicum
· 1 year ago
Thank you so much for your GREAT work !!!!!
smoothie
· 1 year ago
I have iPhone 3 and I just tried to restore to the custom ispw. Got to DFU fine, and in iTunes it completes the process fine, no errors. However in iPhone i just see the grey pineapple for a few seconds then it reboots, show's the pineapple again, then reboots, constantly...
Reverted back to original ispw for now.
Adnen Kren
· 1 year ago
Help !
when 2.0 firmware was restored Boot software never ran so my phone is still Locked.
while creating custom firmware PWnage never asked to browse for BootNeuter files. (for flasing baseband and unlocking the phone) .. secondly it fails to put iphone in DFU mode. (I restored the customized firware from iTunes)
.. any idea why pwnage is not asking for BootNeuter files..
kelly Hendricks
· 1 year ago
------------TO EVERYONE HAVING THE "BOUNCING," NOT LAUNCHING PROBLEM-----------
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem. please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
Hey Thanx, it´s the best thing that has happen this week
jped
· 1 year ago
i cant get it to work i always get the failure to prepare x12220000_4_Recovery.ipsw) and i cant get my ipod to dfu mode im on 2.0 and in itunes i get unknown error 6
jped
· 1 year ago
i cant get it to work i always get the failure to prepare x12220000_4_Recovery.ipsw) and i cant get my ipod to dfu mode im on 2.0 also i dont have “~/Library/iTunes/Device Support” directory
Bong Crosby
· 1 year ago
I just successfully pwned my 2g (edge) phone with 1.1.3 firmware (1.1.2 otb) with at&t service by saying NO to the "is your phone legit question and copying the two baseband files that Kanna has been supplying into the same folder as PwnTool. thank you so much devteam, and i hope this helps somebody out.
I have also made another mirror. This site is fast.
Wilikin
· 1 year ago
hey congrats guys! i have a 2gen iphone with at&t plan running on the 2.0 firmware. i would like to put another sim card in it, i have not jailbreaked the iphone before. solutions would be appreciated :D !
leaz
· 1 year ago
SUCCESS!!! THANK YOU SO MUCH!!! DEV TEAM YES, IT TOOK COUPLE TIMES TO GET IT REBOOT TO DFU, BUT IT WORKS!!! Now, I will wait patiently for the good news on unlocking the 3G! BEST OF LUCK! DEV TEAM~
seldom83
· 1 year ago
i have a unlocked iphone 2g 1.1.4 with ziphone... if i use pwnage tool, and do the upgrade to 2.0, will i be able to keep all my stuff on the iphone like downloaded apps through installer and phone numbers and text messages and stuff? please answer, thanks!
Oscar Ferreira
· 1 year ago
Thanks fellas, much appreciated.
It's all about karam!
Xang
· 1 year ago
thanks you guy a lot for the program keep doing good bro respectful
Bloglos
· 1 year ago
My Email accounts don't work! First gen iPhone. Everything went smoothly. Everything works except for email.
It shows my two previously set up email accounts as inactive. If I activate them, it does nothing. I can't delete the accounts either. If I start up the mail program, it shows a blank screen then exits.
It won't let me set up any new accounts either.
What the hell?
T-Man
· 1 year ago
problem.... everything runs fine up to the point while it's flashing the baseband, i waited about 30 mins and still not passing that point. SO i force shut the iphone off and now when boot up, it keep showing the connect to itune picture. Tried to put it into DFU mode and restore 2.0 firmware but have error 1604. Any help will be appreciated!!!!!!!
Thanks for all your hard work guys, all worked well and now running 2.0!
huntson
· 1 year ago
It keep saying you fail when after I create the IPSW. I would like some advice on what to do. I have followed instructions on what to do to get my iphone in DFU mode.
Ruddy
· 1 year ago
Worked well and everything went smoothly, thanks guys!
oiboy
· 1 year ago
Hi, getting always the message that my phone cant get to dfu mode ? Whats wrong ?
Nik
· 1 year ago
It's great being #1792 to say this: thanks a million, guys!
ted the teacher
· 1 year ago
Hi Dev Team-- Thanks for the pwnage tool! Right now, I'm the one who's getting pwned (error 6?) but I'm sure I'll love it when I get it working. I pwned up to 1.1.4 and it was the best iphone hack I've ever done. Keep up the great work and let the haters hate....
CADER
· 1 year ago
Way awesome- Update 3 was the fix for me although it doesn't sound like it would make a difference, it did! You guys ROCK!
swhit
· 1 year ago
quick question - Everything I read about this said that it was going to install the Installer.app along with the Cydia. However, now that I have completed the process, I only see the Cydia app. Is Installer.app supposed to be there? Other comments above stated that Installer.app is not supported in this release. Is this true? Do we have to wait?
Just wanting to clarify this. Thanks!
And good job guys!
manchinglee
· 1 year ago
HELP! Everything was fine up to the "Flashing Baseband". I waited for 30 mins and still at that screen. SO i force quit and now when restart, it keep showing the connect to itune screen. Tried to put it on DFU mode and restore 2.0 and keep getting error 1604. Any idea i can bypass this? HELP!
dsfg
· 1 year ago
Yep, I had this - Downgrade to 1.1.4, and try again.
CCmi
· 1 year ago
How did you downgraded to 1.1.4 When trying to I allways get ERROR 20 (instead of 1604)
Someone might have already mentioned this, but I can't bring myself to read 1785 posts to find out.
I was able to use the software today to unlock a Gen 1 iPhone that was previously unlocked with Ziphone. I think I must have had ever error under the sun. Including the (6) that people are struggling with.
What I did was use expert mode to force the upgrade to upgrade the firmware and do the bootneauter ... this wasn't happening before.
In regard to the (6) error in iTunes I think this was related to not being in DFU mode ... I keep forgetting this is not the same as Recovery mode.
Once I had a working iPhone1,1_2.0_5A347_Custom_Restore.ipsw file I was able to upgrade a working 1.1.4 iPhone Gen 1, also unlocked with Ziphone just by connecting to the mac, selecting restore in iTunes while holding the option key so I could select the file. I didn't even need to put the phone in DFU mode. Very cool.
Everything seems to work brilliantly from Wi-Fi to being unlocked on the Vodafone New Zealand network. Exchange works great.
Thanks again iPhone Dev Team ... my heros of the day :-)
Christian
· 1 year ago
Thank you! Thank you! Thank you!
You guys were right. It was worth the wait. The best hacking-experience ever delivered. Smooth as hell.
We are forever in debt to you.
offspring107
· 1 year ago
How to remove stocks, youtube, or any stock apps, ( still working on contacts)
Install open SSH from cydia, delete all the files within the app you want to get rid of. restart iphone, iphone will freeze and not get past apple screen, plug into itunes, restore with custom firmware, it will give you a 1600 error an d your phone screen will come back to life, minus the app!!!
Ozzy
· 1 year ago
I am stuck in the last step with an error 1604 (not 1600) when I try to upgrade from DFU mode in Itunes Tried with another user even another computer nothing works!
Help please !!
offspring107
· 1 year ago
search the comments for this post for my user name, i just went through a step by step for a guy with the same problem
iq
· 1 year ago
when is the windows version coming out?
Jake
· 1 year ago
It works great but I noticed there is no software available at all. No games or anything yet. Damn. Either way it all works and I just want to get all the games and fun the old firmwares had.
Alex
· 1 year ago
Is great!!!
homelezZ
· 1 year ago
Thanks Dev Team!!! It worked flawlessly for me, amazing how the dev team releases unlocks almost as fast as Apple releases new firmware.
Kratos
· 1 year ago
Dev Team - Windows Version Plzzzzzzzzzz.
masonican
· 1 year ago
Many thanks Dev Team. The process worked flawlessly on my previously ziphoned 1.1.4. Although I have an AT&T account, I live in Iraq so I activated with pwnage and the unlock, activation and jailbreak went through without a hitch. I used my Macbook with Leopard with no issues and I did not have to create a special directory of any sort. Perhaps you have updated the software since those issues were identified yesterday.
Alex
· 1 year ago
Error 6 with iTunes, please Help me ! :(
AlienX
· 1 year ago
Thank you guys!
cutebutt
· 1 year ago
does this work for Italy??
swhitlow
· 1 year ago
The article above states that it will install the Installer.app. However, the only one I am able to find is Cydia.
Does anyone know how to get the Installer.app loaded on 3g?
Thanks!
googlebot
· 1 year ago
Hi guys, I am a noob and need some help. I have an original iphone that I accidentally updated to 2.0. I dont have service on this phone anymore as I have upgraded to the iphone 3g. I do however want to unlock this phone and put it on t-mobile. My question is how do I do so? Can someone please tell me the steps, also do I need to insert the t-mobile sim card before I start?
Kevinsvater
· 1 year ago
Where can i download the ipsw for the iPhone 3G Firmware? pls help!
basst
· 1 year ago
Finally: THX!
v2mungg
· 1 year ago
I love you guys!
tommy
· 1 year ago
Is it mandatory to first upgrade to 1.1.4 (I have a jailbroken 1.1.3)?
googlebot
· 1 year ago
Hi guys, I am a noob and need some help. I have an original iphone that I accidentally updated to 2.0. I dont have service on this phone anymore as I have upgraded to the iphone 3g. I do however want to unlock this phone and put it on t-mobile. My question is how do I do so? Can someone please tell me the steps, also do I need to insert the t-mobile sim card before I start?
cutebutt
· 1 year ago
does this work for italy?
vladimir
· 1 year ago
This is awsome Thanks for all the hard work guys now.. any time line for unlocking 3g?
here's a FULL and EASY guide from MMI w/pics and everything! enjoy! (unlocked my 1st Gen, 1.1.4 iPhone succesfully!!!)
HELP please
· 1 year ago
Please help. I went into DFU mode from iphone firmware 1.1.4 hacked and now it keeps on egtting errors when i try to restore. ive had 1602 and 1601. Ive tried everything, please help. Im on windows and dont have pwnage so i got a custom fw and i cant seem to restore to it. Ive changed the name of the file so many times along with so many other things. PLEASE HELP.
Steve
· 1 year ago
Thanks from the UK!
Framekung
· 1 year ago
Thanks to the iPhone dev team. I'm waiting for good news for iPhone's user.
Jaime
· 1 year ago
i have a couple questions you guys may be able to answer. I am knew to the whole "jailbreaking" and "unlocking" the iPhone. I did successfully jailbreak the my iPhone using the new pwnage tool and can now run the Cydia installer app. However, how will i know what apps are safe to download running a 2.0 firmware? Also, does anyone know if i can customize my phone through an application on Cydia?
ShoppingTub
· 1 year ago
Just made a torrent of the file it can be found at:
thanks for your efforts, it is very appreciated, all of you have a great reputation. sorry for all the presure.
cb
· 1 year ago
great job guys the program works beautifully
Sayam
· 1 year ago
Please add an option to have/ not have cydia as I (and many other people) don't like Cydia. Also, I hope you add the Installer with pwnge soon. Thanks for the great release.
townhouse57
· 1 year ago
Help, new to Mac how do i get firmware 2.0 ipsw file, itunes already running newest firmware, when i down load pwnage tool does not recognize it, help
Fab
· 1 year ago
you guys rock for sure !!! thx for all your great knowledge and of course, for sharing with us !!!! thx thx thx to all of you !
Carter
· 1 year ago
Have a few questions
1. Since upgrading to 2.0 which works flawlessly so far (Thank you very much Dev Team!) my EDGE data is now enabled somhow. Problem is I don't subscribe to a data plan (Yikes!) so I need to know how to turn of EDGE.
2. Second question is I am planning on upgrading my friends iPhone to 2.0, can I just send him the custom restore file the the tool created or does it create a specific file for each phone?
Thanks in advance!
diederik
· 1 year ago
I am terribly sorry but how can i open the pwnage tool?? I updated the phone by accident and now it is locked etc. I downloaded the file but there is no exetention i can find in the download that can work, at least i think... I only see pictures and patch files. can somebody help me??
mozzer
· 1 year ago
Cheers mates, I'm having an iPint for you... Thanks again
Sassou
· 1 year ago
THANKS A LOT DEVTEAM, BUT WE ARE WAITING THE PWNAGETOOL 2.0 FOR WINDOWS. WHEN IT IS EXPECTED?
Csabee
· 1 year ago
Windows version?
Yëco
· 1 year ago
My Emergency call issue was resolved using Frederick231 solution:
============================================= Hi Everyone,
I had 2 iphones - mine was running 1.1.4 hacked in Australia and this tool worked no problems.
HOWEVER - the point of this post is that I also had a friends iphone who had upgraded to 2.0 by mistake and pwned ALSO WORKED.
The steps to take for hacking an already upgraded 2.0 are (do NOT have your iphone plugged in)
1. Open up the pwned 2.0 2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work 3. Select the 2.0 firmware and also select relevant *.bins 4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6" 5. Go back to main menu and enter General Settings --> select Enable Baseband Update 6. Then build the firmware and save it to your desktop 7. Once the firmware is built, pwned will ask you to plug in your iphone via USB. 8. It will then step you through the process of enter DFU mode 9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded) 10. Hold down ALT (on MAC) and select the firmware on your desktop 11. iPhone will update - LEAVE IT for the entire process. 12. It should install and all will work :)
Cheers ======================================
Nik
· 1 year ago
What does 2.00000 in the logs mean?
m@rco
· 1 year ago
Thanks guys.
Now i need aan MAC to install it. Roflol. NOw the hunt for a mac is on.
Thanks for making this possible in 9 days!!!!!!
Take your rest now and enjoy the comments.
Ken E
· 1 year ago
Awesome fucking job Dev Team!!! You guys fucking rock!
consolation
· 1 year ago
Sweet, kudos to you DEV team.
Zazzo
· 1 year ago
Grazie mille!!
Thank you from Italy
ThatGuy
· 1 year ago
Many thanks!!
BiGPrO
· 1 year ago
Thanks for that.... Really Good..
monky
· 1 year ago
i got the same error every time pwn said fail to enter dfü but my phone is in dfü and if i try to restore with custom firmeware there is a fail in itunes unknown error by extrackting firmware pleace help
diederik
· 1 year ago
I have a windows pc do i have to wait for a windows version?? I tried for hours but i can't get the pwnage tool to get started or working. I can't find a file that works a exe or bat file or somethiing like that is there anyone who can help me?
Sebsto
· 1 year ago
Works Great ! Thank you very much, guys, good job !
BOB HOLCEPL
· 1 year ago
ok I am lame....
I have been screwing with this for 3 hours. I get thru it all and can't select the custom update on my desktop. so it is bricked (since I am tmobile) wtf am I doing wrong? I am putting it into DFU and pressing the alt (that is the key next to the space bar, right?) just can not select the custom install no matter what.
any help? please!
Bpb
Mike J
· 1 year ago
Hey guys,
Just a big thanks I guess. I've patiently and quietly checked your page over the last week or so waiting for this, and it did not disappoint. Your work is much appreciated here in Aus.
ministty
· 1 year ago
OK thank you dev team for being the most unselfish group. Have been waiting for an unlock as im travelling os with my 1.0 iphone. To all those zibri lovers go fuck ya selves pwnage rocks. Hey zibri the 90's called and wants your gay ass.
frankygth
· 1 year ago
I tried different 3.9 bootloaders! But still I receive an error message? ... it appears not to be the proper file?? Could anyone give me advice? Thx
I just can't seem to get it into the appropriate DFU mode..... anyone have any pointers?
yoyoman
· 1 year ago
I am having Mail problems now. I only get a screen with the refresh button in the bottom left, and a write icon in the bottom right. Plus, a few seconds after opening the Mail app, it just goes back to the icon screen.
I have a 1G iPhone that was unlocked before, and I had my Yahoo and an exchange based email working before. The Mail settings still show those two accounts too, but I just don't see anything, nor can I do anything ...
macshodan
· 1 year ago
Thanks a lot for all your work and the efforts you've put in this release. You truly are great. Greetings from Italy!
The Pwnage did the Jailbreak and installed Cydia (with some apps) but it broke the SIM recognition on a mexican iPhone with Telcel as the only one valid carrier here.
playing the idiot
· 1 year ago
Why are we still waiting???????
i hate the fact that windos has to wait in the shadows whilst the macers get to drool over there new pwn.
PITZI
· 1 year ago
Thank you guys.
jgroth
· 1 year ago
i have completed the unlock of my 3G iphone and everything looks good except that it isn't reading my ATT account anymore. I can connect to wifi and have the cydia installer, but it isn't associating with my ATT account. any suggestions? i've tried restarting it to no avail. thanks.
hey dose re boot just mean restart yr mac??? and wat do u do with the bootloder???plz help
Karl
· 1 year ago
hi folks,
thanks for the great job.
Karl
jpb039
· 1 year ago
On a 2G phone I seem to have *relocked* the phone and now can't get past the activation screen. I initially ran pwnage on a phone running 1.1.1 that had been unlocked and jailbroken using an earlier exploit. I followed the posted directions and everything seemed to go fine, until the phone restarted and required activation. I then put the phone into DFU mode, restored the Apple 2.0 software and repeated the process. Again, everything seemed to go fine, and the phone boots up with a pineapple logo, but I can't get past the activation screen. I would appreciate any suggestions about how to get past this. I'm running the latest version of Mac OS and iTunes on a MacBook Pro. I left a SIM card in the phone while running the software, if that makes any difference.
Thanks for any suggestions ...
David R.
· 1 year ago
So after I run the program, IT will not go into DFU, so when i try to run the bundle through itunes by holding option when i click restore, it tells me that this iphone cannot be restored (6)
is anyone familiar with this error...im stuck
para
· 1 year ago
May someone please post torrent links for the firmwares
i need to get iPhone1,1_2.0_5A347_Restore.ipsw without freakin errors in the MD5 checksum ;-(
creatix
· 1 year ago
thank for this great work :):):)
horst
· 1 year ago
HEROS!!! Thank you! This is incredible ;-)
Chris
· 1 year ago
Thank you for your Work!
hands.tied
· 1 year ago
Hey Guys!
The DevTeam did a really great job. It seems to be an Apple bug, a friend of mine had the same problem with his iPod Touch and didn't figure it out.
There seems to be an problem with the "restore from backup" option. Your mail application won't start and you're unable to delete, create or do something esle with your mail account settings. Here's the solution.
It's an permission problem. I solved it via SSH. connect to your iphone via ssh user: root pass: alpine
and run "chmod -R mobile:mobile /private/var/mobile/" without quotes.
greets didi
blorg
· 1 year ago
I have the same problem you had with mail. I'm trying your fix, but I get this error message: chmod: invalid mode: `mobile:mobile' Try `chmod --help' for more information.
any ideas?
xserve2
· 1 year ago
To all concerned in this development a BIG BIG Thanks - I did the PWNAGE just after release to my iPhone 1 and iPhone 2 3G - both went through without a hassle - (OPTUS Australia)
Again thanks and look forward to more great work
Pierre
· 1 year ago
Thanks!
mat1990d
· 1 year ago
A WINDOWS VERSION PLEASE if not, can I install mc os X on my windows laptop or computer?? ive got the dvds. however please the world needs a windows version pleaseee
Nesus
· 1 year ago
Very very thanks for you works. You are the Best !!!
Mitch
· 1 year ago
Thank you guys for creating this wonderfull tool! Ik will try it in a few hours on my fathers iPhone. Respect for your skills and determination to build a tool like this.
aussiesimmo
· 1 year ago
Thankyou so much dev team your hard work is really appreciated i'm loving 2.0 and app store
i would like to have installer as well as i use touchpad pro a lot and like the freedom of summerboard, is there any word as to when installer will be updated to run on 2.0?
thanks again you rock!
Raf
· 1 year ago
Hard to wait bot now we are all happy!!!! Thanks a lot the dev team :-)
PS: Ez egy jo ajandék!!!! Kösz pytey és a dev-teamet!
I should not of hacked...the applications I always used in the previous version may take awhile to come onto iPhone 2.0.
Ajay
· 1 year ago
Windows version please?
Swissmac
· 1 year ago
A windows version for the poor windows user? :)
JeffDAK
· 1 year ago
Works great flawless 2g iphone
vet033
· 1 year ago
ppl ..... u r wonderful by the name of over than 200 persons i know u making a great job .......... thanks a lot
DG
· 1 year ago
fantastic work boys!
swissphil82
· 1 year ago
ok does this only work with US carriers for now? everything worked great even installing everything on the iPhone but now iTunes keeps telling me that "the SIM Card inserted in this iPhone does not appear to be supported" Guess I'll have to go back to 1.1.4 until Swiss carriers are supported
joseph
· 1 year ago
Doesn't work with leopard 10.5.4 and itunes 7.7, it freeze, don't even start
Xenn0X
· 1 year ago
works fine here on same.
Pieter W
· 1 year ago
Can anybody help me ? I have the 2G first Iphone and I just can't get it done. When the package has been build, in recovery mode (dfu) after holding the power button en home button, it just won't work. I also tried it with the phone on, but still nothing. It keeps telling me, that the phone cant' be put into recovery mode. Does anyone know the solution? :(
Thanks!
Raf
· 1 year ago
Hi,
try to choose your pawned firmware with Itunes.
Raf
ScorchedEarthPolicy
· 1 year ago
You many need to try the DFU procedure a couple times. It sometimes takes a bit of practice to do it right. Remember...turn off the phone. Wait 5 sec. Hold Power & Home together for 10 sec. The release Power and continue to hold Home for another 10 sec. The release Home.
Peter Harrington
· 1 year ago
Hi, Just downloaded it on to my Intel Macbook pro running 10.5.4, and all it does is bounce in the dock, then nothing. It opens but there is no GUI, just the pwnage tool text to denote the program is open in the top left of the screen.
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
naryaith
· 1 year ago
I had the same pb on Ibook G4, simply repaired the permissions and reboot did the trick for me..
Dave
· 1 year ago
Thanks Dev team, today (July 20th) is my birthday... :-)
oby
· 1 year ago
wen will there be support 4 windows os?
MaxxUS
· 1 year ago
A big thank you from us at PI !
kostas_gr
· 1 year ago
Guys please inform us about a windows release? :S
68030
· 1 year ago
Thanks Dev Team!
pgabor
· 1 year ago
HI, I've got an iphone with 2.0 beta custom firmware beat 4.. can I simply pwn it up to 2.0? or first I will have to restore it to 114?
machappy
· 1 year ago
Thanks guys! BTW does anyone know if this will work on a 1.1.4 phone that's been upgraded to 2.0? (I was curious) Like will it work straight up with that phone or would I have to downgrade iTunes and go back to 1.1.4 first?
Norpan
· 1 year ago
THANKS!!!!!!!
Sasan
· 1 year ago
Thanks so much for this awesome tool. I bitched around before as I was impatient. sorry for that and keep up the great work. love the softtware :)
saitek
· 1 year ago
Thanks you guys! Without you I would be lost!
Peter Harrington
· 1 year ago
Hi, Just downloaded it on to my Intel Macbook pro running 10.5.4, and all it does is bounce in the dock, then nothing. It opens but there is no GUI, just the pwnage tool text to denote the program is open in the top left of the screen.
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
Peter Harrington
· 1 year ago
Hi, Just downloaded it on to my Intel Macbook pro running 10.5.4, and all it does is bounce in the dock, then nothing. It opens but there is no GUI, just the pwnage tool text to denote the program is open in the top left of the screen.
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
kd6qlk
· 1 year ago
all that take about safe code and 1 brick iphone real cool no more iphones for me thanks alot and after bying kate wait a joke
Nendoke
· 1 year ago
Hey Guys, This is Nen from fenopy.com, I can give you a mirror on my servers if you need more :) contact me to setup one.
Cheers.
Craig
· 1 year ago
How can I tell if the unlocking and jailbreaking worked? The directions didn't do a thing for me. It would be great if the geeky engineer types would take some communication courses to figure out how to talk to the rest of us dummies.... Actually you know I'm just jealous because I'm not smart enough to be a "geeky engineer type". It would be awesome if someone could explain what the advanced features of the program do. As usual, the geeks are trying to tell the rest of us how to do it in their own language which I think is probably Klingon... Not sure.
Angainor
· 1 year ago
Very well done. Easy to use and worked perfect on my iPhone 2G. It was worth the wait every minute!
Thanks, DEV-Team!!
SpX
· 1 year ago
Hey guys thank you, it works flawlessly ! :)
It updated my 8GB 3G using the expert mode, and didn`t experienced any problems, only the WiFi signal was gone. But I applied the saved backup it worked fine again.
Too bad Cyntia isn`t compatable with the previous installer software/programs, but it will only take some time before the bests apps get ported.
Thanks again, and have some rest and a nice drink.
imarc
· 1 year ago
Thanx dev team, it all works great! Regards from the netherlands, keep up the good work!
It was like described. Click and Installed. Easyrider :-)
DevTeam you did it again
spn_
· 1 year ago
Thank you very much guys! Great work!
amf_bv
· 1 year ago
hi, pls smdy help. My 1.1.4 couldnt work before either. some issues with network and wifi, i have waited for 2.0. Process went perfect for me, but the phone continuously keeps restarting with the pineapple logo on it. if i enter DFU mode, i have Steve J. with PWNED in russian. ANy suggestions , please ??
Jeez bro tjhanks for that ! been waiting for a while ? isit a full UNLOCK PATCH for i phone 3G
A440
· 1 year ago
RE: unlocking phones for canada Pwnage 2.0 DOES NOT UNLOCK PHONES for fido in canada I just successfully built my custom ipsw file, entered the DFU mode, used itunes to install the custom file, got the famous pineapple, watched it download the apps, etc. then when it restarted it came up with the IMEI numbers, and itunes showed a note explaining my SIM/Phone service is not compatible (it is) Took the same SIM out, put it in my new 3G, and it works fine. THEREFORE< I believe Fido/Rogers is using a system that this unlock will not work for.
blorg
· 1 year ago
I think you did something wrong. It works fine for me.
fumiteru32
· 1 year ago
i have a BIG problem... u have successfully pawned the firmware.. able to restore... but couldn't boot up... it keeps rebooting and rebooting on the PINEAPPLE bootup screen... i don't know what to do man... PLEASE HELP....
valleValle
· 1 year ago
Same here, and a couple of more of us.....
Romero
· 1 year ago
WINDOWS VERSION??????
benjamin
· 1 year ago
WHY ONLY MAC!! :( i dont have a maq, when is the windows coming out?
Wah!
· 1 year ago
After a few hours of frustration, I have a working unit! I couldn't do the restore from DFU, it had to be done from a normal restore. If I tried it from DFU, I got an error 1600.
Thanks Team!
Martin
· 1 year ago
It would be cool if someone would write a parser software for the apple software update xmls. this software could tell the user, when new ipsw firmwares appear on the apple servers and allow to download them as well.
Milo
· 1 year ago
GRANDIOSI!!!!
heyroth
· 1 year ago
Thanks a million... Quite happy for all you've done
friedrich Fuhr
· 1 year ago
Vielen herzlichen Dank aus Deutschland / many many thanks from germany es hat ganz toll geklappt mit einem 1.1.4 2G iphone / it worked phantastic with an 1.1.4 2G iphone aus mannheim - stadt im quadrat / from mannheim - city made of squares
stevebo77
· 1 year ago
Well.. meh. Have been trying on my 3g for a couple of hours now and no joy.. Followed the various steps and advice to the letter, the program works like a dream but I keep getting the power-cycling pineapple after installing the new custom firmware. Not sure what the dealyo is and have just brought the phone back to stock firmware and resyncing my stuff until I get some sleep :P Nonetheless, Cheers to the Dev team for rocking!
gemini
· 1 year ago
Fantastic!
jeramy0611
· 1 year ago
Well I've tried several times by now but every time I've got the "UNKNOWN ERROR (6)" message when I choose the patches firmware file what comes out of the PwnagTool.app ... So for me it's not working at the moment. Any hints what might went wrong ? ;-(
dankey
· 1 year ago
HI, thank you! You are the best. Everyting worked fine, now my iPhone 1G 16GB is up to date with the firmware 2.0, jailbroken and unlocked (swisscom). Thank you again for your great work.
nevyn
· 1 year ago
After pwning an iPhone 3G, I'm unable to restore the backup of my personal data. There's a progress bar for several minutes, followed by an error dialog, "iTunes could not restore the iPhone "Mishima" because the backup was corrupt or not cmpatible with the iPhone that is being restored" :( Anyone else gets this?
i have a BIG problem... i'm managed to create the custom firmware... able to restored... but it keeps rebooting and rebooting on the PINEAPPLE boot up screen... i don't know what to do man.. anyone know what is going on..? PLEASE HELP!!! :(
smoothie
· 1 year ago
I am getting the exact same problem... i have a iPhone 3g, and this is my first, maybe i am doing something wrong?
Christoph
· 1 year ago
Thanx so much guys!
eric
· 1 year ago
HELP ! guys, i don't seem to be able to get to the point where i can choose from 1.1.4 or 2.0 version to download. somehow i am stuck n a loop with the pwnage tool : it keeps asking me to do the same operation over and over again : building ipsw. i built it 3 times already, put my phone in dfu mode - and still, i'm unable to access the versions download page on the tool. what'd i miss ? please, help me guys. i'm stuck here. thanks.
I was getting stuck with (6) errors as well as 1600 and then 1601 errors. I did what one guy suggested, but it didn't work. only when I did a regular restore (to apples normal firmware) and then did a restore to the pwned firmware did it work. This was on an iphone which had mistakenly be upgraded to 2.0 before it was time.
tintu
· 1 year ago
thank u so much!
Raphael
· 1 year ago
I Have a havy problem! my Iphone dosen´t restore anymore: Itunes say´s : 1604
what shut i do?
pleas help me
Adrian
· 1 year ago
I had this error before so I run PwnageTool 1.1 and I did this: 1) Browse IPSW: firmware 1.1.4 2) Run iPwner
Jeff
· 1 year ago
Heya Dev Team.
I first tried all this early today - Sydney time - and it failed. I was stuck being able to make only Emergency Calls.
Then I had to go out for the day ... without my iPhone cos I'd stuffed it ... and I was hoping that I'd be able to get it working when I made it home.
When I got home I really focused and followed the steps perfectly ... and ... I'm pleased to say that it all worked perfectly.
I now have my 1st Gen 1.1.1 upgraded to 2.0.
I'm connected to Optus here in Sydney, I've made and received calls and installed some AppStore Apps.
A sincere thanks to your team for all the hard work.
You guys are great!
Cheers
Jeff
benderkiller
· 1 year ago
Hi, I make ipsw file with pwnage for iTouch but if I Restore in iTunes the ipsw file extracting and then iTunes write: ,,The iPod could not be restored. An unknown error ocured(6)."
SK
· 1 year ago
* SERIOUS PROBLEM *
Advice sought.
I cannot restore my iPhone to any of the previous versions of the Firmware (e.g. 1.02, 1.3, 1.4, 2.0, Custom_2.0)
Everything fine here! Old iPhone with 1.1.4 (Ziphone hack) now on Software 2.0. Read the instructions of cimkeri below! Most important: There is a difference between DFU mode and restore mode!! Once you have solved that, everything is fine.
Have fun and greetings from munich,
Thack
Daniel :D
· 1 year ago
I really love you! :D
Tony
· 1 year ago
Thanks dev team :) You are the greatest!
SomeGuy
· 1 year ago
Worked like a charme, awesomeness!
moh
· 1 year ago
thnx
i've been waiting ..
for soo long ..
but my iPhone is dead for the moment ,,
it's a brick i guess ..
i didn't do anything ,, it just died from the battery ,,, and when i tried to recharge ,,, it just didn't work again ..
i think it's bricked ..
it shows a red battery mark with the lightening strip under it when connected and when disconnected it shows the lightening strip and a plug icon ...
Thank you Dev Team, u guys are the best of the best!
macelek
· 1 year ago
KÖSZÖNET!
Kent
· 1 year ago
PC Version :D PLEASE!!!!!
KM71
· 1 year ago
Hello! I tried pwnagetool but I think I've done a mess. I was in DFU mode (in DFU screen) waiting for the tool to work on my iphone (that had a jailbroken "regular" 1.1.4 on) and I closed (=forced) the program because I thought it was looped - and now none of my computers can recognize my iphone when plugged in. Is it possible that I did a permanent damage? I mean - i still think to be in DFU mode right now (blank screen - no user input allowed) but iTunes iLiberty and so on can't "see" my iphone :-( Is there any way to reset this situation and to restore? Any help will be appreciated
Thx
MuscleNerd
· 1 year ago
You didn't do permanent damage. DFU is a very powerful mechanism that can recover from everything you throw at the main CPU. Some of us during development have recovered from *completely erased* iPhones with literally nothing on there to boot, and DFU was able to recover. So, don't panic :) Visit the forums or IRC for help on how to unjam yourself.
appleminded
· 1 year ago
Hi huys, just woke up and actually already gave up on unlocking and using my phone any time soon until I saw this update. Downloaded it (good interface) did the process as described below but no luck. Anybody any idea? I am on iTunes 7.7, iPhone 1st gen with already firmware 2.0 on it (yes i was stupid to do so but was a bit drunk) latest OS etc. After restoring with the custom firmware I am not able to use the phone. I am in the netherlands and use TMobile. Phone was unlocked before with ZiPhone 3.0
Shuflie
· 1 year ago
I added another rapidshare download in case the others get too many hits
I am sorry its not possible to unlock Swisscom iPhones ! After 5 times running always NO network available.
Johannes
· 1 year ago
Made the restore ipsw using the pwnage tool, file named iPhone1,1_2.0_5A347_Custom_Restore.ipsw When I try to load he custom ipsw in itunes (alt clicking restore when iphone is in dfu mode, and selecting the custom restore ipsw) I get an error saying that "an unknown error occured (6)" http://img180.imageshack.us/img180/2377/picture... as a side note, I the pwnage tool never aknowledges that the iphone is in dfu mode, but that shouldn't be a problem.
Please advise. what does the error mean and how do I fix it?
Smartphoner
· 1 year ago
Sorry, its not possible to unlock Swisscom iPhones !!! After 5 times running always NO network available !!! Please why ??
RIZZO
· 1 year ago
Thank you very much for this stroke of genius, all that remains is to unblock the iphone 3g to put any sim card. Encore miles thank you.
"Update 1: Just to clear up some confusion over what this actually does: yes, it jailbreaks and unlocks older iPhones, and jailbreaks iPhone 3Gs and iPod Touches. We only support the 2.0 firmwares."
does it mean that this software do not unlock iphone 3g just iphone 1st gen.? it just jailbreaks iphone 3g?
jeallot
· 1 year ago
Thank you very much for this stroke of genius, all that remains is to unblock the iphone 3g to put any sim card. Encore miles thank you.
jeallot
· 1 year ago
Thank you very much for this stroke of genius, all that remains is to unblock the iphone 3g to put any sim card. Encore miles thank you.
Romero
· 1 year ago
WINDOWS VERSION?????
Macro
· 1 year ago
Thank you!!! Pwned perfectly first time. I've been playing with my phoneSaber all morning (not a euphemism).
A MASSIVE thank you from Malta's first 2.0 iphone. Worked like a dream. Just don't forget to answer NO to the dialog in pwnage that asks if you are a Legit iphone user... this got me the first time.
Rob
· 1 year ago
The correct terminal command is mkdir ~/Library/iTunes/"Device Support” and not mkdir “~/Library/iTunes/Device Support” . If you run the command posted by iphone-dev the terminal will complain that no such file exist. That is because you can't put a tilde ~ within the ".
//Rob
MuscleNerd
· 1 year ago
Thanks for noticing that! Just corrected it.
Khan
· 1 year ago
OVER 90% ARE PC USERS, LESS THAN 10% ARE MAC USERS, THE PWNAGE TOOL SHOULD HAD BEEN RELEASED FOR PC USERS ASWELL, AND NOT ONLY MAC. I guess we need to wait a bit longer, but a MILLION THANKS goes to DEV TEAM for their hard work and keeping the thumbs up all the way. LOVE U GUYS!!
BS
· 1 year ago
Works like a charm!!! ;) Thanks very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Johnny
· 1 year ago
T-mobile EDGE subscription settings please!!! (on the 1.1.4 there was an EDGE menu, where we can set up the APN, now this is missing)
Any solution to use the EDGE network? PLZ HELP!!!
Johnny
· 1 year ago
EDGE SUPPORT PLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEZZZZZZZZ!!!!!!!!
macelek
· 1 year ago
Don't be stupid... on iPhone: Settings-General-Network-Cellular Data Network
Mad_Ed
· 1 year ago
Oh bugger i thought i twas the windows version then lol
Just goes to show that these chaps know their way round a apple better than a fruit and veg man on speed! i shall just have to wait for the windows release which hopefully will be soon. Thank you Team DEV!!!
68030
· 1 year ago
iPod - Finally got it to work, the pwnage tool created the custome fw first time but wouldnt get past DFU, then trying to restore through itunes kept failing with 'this ipod cannot be restored' on my iPod but then...
I renamed the custom firmware to iPod1,1_2.0_5A347_Restore.ipsw (same as the original 2.0 update) and moved it to /Users/myname/Library/iTunes/iPod Software Updates/ and then when I tried to restore through iTunes it worked a treat, I'm syncing app store apps and music as we speak!
FYI this is on intel osX86, 10.5.3, iTunes 7.7
Nice One Dev Team thanks again!
Vin Diesel
· 1 year ago
A lot of Hype for a load of shit that doesn't even work. And the creator doesn't even know what's wrong with it. WHat A Fucking Joke.
-
· 1 year ago
FANTASTIC ! THANK´s ;-)
i hope that the new 3G well done!
THANK YOU!!!
· 1 year ago
Only had to run pwnage once. Ran smooth. Though, when I fired up my phone, there was a SEGA logo followed by Sonic speeding by. Looks like my 1.1.4 is now a GameGear. Weird.
Seriously though, all joking aside- Damn nice work gentlemen. Worked flawlessly. Just downloaded NES. THANK YOU SO MUCH DEV TEAM!!!!
Dave22802
· 1 year ago
I can't get the firmware, pwnage tool cannot find it even after downloading it in iTunes and then when downloading from the internet it its a folder not a file or box??? HELP!!!!!!!
Condition GREEN :-) After 1 1/2 hours of trying I made it, too !!! The problems before seems to be caused by the fact that I never managed to bring the iPhone into the correct DFUE mode before. Finally the PwnageTool itself managed to set my device into the DFUE mode but it costs several tries and generates some stress - after all - it went out fine for me.
Many, many thanks to the dev-crew - GREAT JOB !
Phipz
· 1 year ago
Tanks for releasing! It just works..
msvensson
· 1 year ago
Thanks a' lot DevTeam, This is highly appreciated. The work you have done is great. The pwnage-Tool 2.0 is working nicely :)
Macho Man Randy Savage
· 1 year ago
Worked out perfect with my 3G. Thank you so much!
Dan
· 1 year ago
You guys are awesome, thank you soooo much!!! Can't believe I already have the new Firmware 2.0 on my iPhone with all the cool apps and Cydia ^^
If you like, you can link to it in the article. The Server is able of taking some load.
Best wishes from Switzerland
JoeyMoe
· 1 year ago
LOVE YOU!!!!!!!!!!!
Tehprophet
· 1 year ago
PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS! PLEASE MAKE FOR WINDOWS!
g23
· 1 year ago
Really a great release from the dev-team. So much user-friendly. Great!
scot909
· 1 year ago
THANKS DEV TEAM. YOU RULE THE WEB!!!!
francis
· 1 year ago
I tried tu use pwnage tool 2.0 on my iphone 1 g it finds the firmware but it did not find the bootloader 3.9 it asks if i want to search the web now i dont know what to do i have the bootloader 3.8 and 4.6 on my mac can someone help me please
Diam
· 1 year ago
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
macelek
· 1 year ago
hey, don't scream... on iPhone: Settings-General-Network-Cellular Data Network
Dave22802
· 1 year ago
where does the pwnage tool look for the firmware bundle cos i have it but it can't find it unless I am in expert mode and then I get really confused!!! PLEASE HELP thanks
Jim from Toronto
· 1 year ago
Thanks for all your hard work and dedication everyone. I have restored my version 1 phone with out a hitch. I also have a 3G model and haven't tried your tool on that yet but version one is perfect. Also Thank You to iClarified for there tutorial.
Keswick Jim
AppleDev
· 1 year ago
well, it works fine for me [iPhone 2G]. google maps it's far more accurate then ever and also new fetch and push mail settings!
great job guys!
Kira
· 1 year ago
I SEE A PINEAPPLE!!!!!!!!!!!! YYYAAAAAYYYYY!!!!!! BTW I think that there should be another update that clarifies weather someone is a "legit iphone user" cos i got confused... also although this is quite easy to use i fell it's not really granny proof, i almost thought i had to downgrade my itunes to 7.5 cos i didn't have the directory ~/Library/iTunes/Device support yet itunes gave me the error 1600, found out i wasn't a "legit iphone user"
mxz
· 1 year ago
Phew, finally. The weird thing about this app was that it went into "failed to enter DFU" right away, even when the iPhone wasn't connected to the computer. The only way to get past that was to enter DFU mode ALREADY BEFORE starting the .ipsw build. This wasn't mentioned somehow. I updated to 2.0 via iTunes normally and then tried running the tool - but got Failed DFU, iTunes Error 6 and 1600.
If this happens to you and if you accidentaly lock your iPhone into a neverending reboot loop or are stuck in the normal recovery (not DFU mode) do this:
- Do a normal restore from iTunes. This will wipe everything, restore and update to 2.0 and you'll get it to the "incorrect SIM" phase. - Then put it properly into DFU. Connect iPhone via USB. Press & hold both Power and Home buttons for 10 secs. Straight after the screen goes black, release the Power button, but keep holding Home. After about 7-8 seconds, iTunes should bounce and tell you that it has discovered iPhone in recovery mode. The screen on the iPhone should be black and NOT with the cable and iTunes logo. - Start Pwnage Tool 2.0 on Simple. - You should now get to the phase where Pwnage Tool tells you to switch off phone. Do that. - You'll have to repeat the whole DFU process again, this time with clear instructions on screen. - Once you've done that and the tool says everything is OK, quit it. - in iTunes, ALT-click on "Restore" and choose the custom .ipsw file you've just build on your Desktop. - Wait.
And all is good again.
carlos
· 1 year ago
AWESOM-O
thanks a lot guys.
xPm
· 1 year ago
I couldn't restore on a mac and I got it to work on my windows, im so happy right now :)
adam
· 1 year ago
THANKYOU!!!!!!
JZa
· 1 year ago
Thank you from Estonia :).
CCmi
· 1 year ago
When trying to RESTORE I'll get Error 1604 !!! What can I do now?
CCmi
· 1 year ago
Still having this BAD issue with ERROR 1604 !!! PLEASE HELP!
DFU Mode still works, then I use my own PWNGed IPSW and after a while I get the 1604 Error... ... tried different Macs and IPSW Files allready! Any IPSW lower than 2.0 (pwnged or not) results in ERROR 20 the moment I start the recovery process!
Any Idea, Tool, Help, LINK?
michil
· 1 year ago
I can only say:
THANKS
Great job. Great App.
JZa
· 1 year ago
Thank you from Estonia :)
IceCrusher
· 1 year ago
I'm using a 3g, the whole pwnage process worked. after unlocking my sim i had a different problem: all the provider functions (phone/3g/edge) do not work. in the upper left corner it says "Kein Dienst" what is "no service" in english i guess.
pls help
marcol
· 1 year ago
got the same problem in switzerland: "no service". can't even use the original SIM locked card. otherwise it's nice to have a jailbroken iphone 3G !!
please update us on the 2.0 UNLOCKING STATUS! Will it be avaliable in the next month?
JANE
· 1 year ago
THANKS
dangerFX
· 1 year ago
If you are getting this Error 1600, or error 6 as i was, and can't find the file, create the folder. Worked for me. Never been so happy to see a pineapple.
Renan
· 1 year ago
im having allot of trouble in the "after life" pwnaged iphone
Josh
· 1 year ago
Thx a lot. Worked great for me!!!! iphone-dev.org rulez!
sagaj
· 1 year ago
i've just pwned my 1.1.4 iPhone on Windows PC using hints from here: http://iunlocked.org/ IT'S WORKING. THANKS GUYS!!!!
Amabushman
· 1 year ago
Many thanks. Worked first time on my first gen phone. Great stuff
Hobbes
· 1 year ago
شكراً جزيراً من اليمن
Thank you very much from an American in Yemen :)
jm78
· 1 year ago
Thanks Guys - Worked a treat!!
sirdir
· 1 year ago
I had no problems whatsoever, but I already pwned my phone before, so I didn't run that part. But what I'm not desperatly looking for is a possibility to switch of the keyboard auto correction. Doesn't seem to work the same way as before and didn't find anything useful on the net.
THANKS A MILLION DEV TEAM! the wait was definitely worth it just successfully unlocked and jailbroke my 2g iphone with 2.0 on windows using http://iunlocked.org/
This is a h@k of a release.. think you not need to hol back on the windows users.. not everyone is lucky enough to affort a Mac (most of them are using there company notebook :P )
Telvis
· 1 year ago
I had previously updated to 2.0 by mistake - followed some instructions here and all is great - it even ported my contacts, messages and mail settings back from the initial phone update that I did last week. Perhaps it would be wise to do a full update with a normal unhacked firmware through itunes which does a full backup of your phone.... then follow the instructions in this blog.
One problem I do have is that none of the apps store apps will install as it says I'm not authorised to install them on my mac and if i do it directly from the iphone it says im only authorised to install uk apps....
Cheers Dev team for this tool - its very slick and effective. What will have to do next week when not checking this site constantly???
Thak you guys! My bricked Iphone is now up n running with 2.0. You´ve done an amazing job with Pwnage! BIG UP!
keep it up!
Zoof
· 1 year ago
I see lots of thankyou's and lots of mirrors, but has anyone *tried* it ? I'll wait until I have some confirmation from users (and maybe wait for the 4.0 installer)...
andrew
· 1 year ago
Thank You sooo much !!!!
Ovi
· 1 year ago
FUCK YEAH. This program is better than porn.
THANKS DEV-TEAM
CHeers from ROMANIA
Lobo
· 1 year ago
Thx, thx thx!!!
saeedsaf
· 1 year ago
thank u thank u thank u thank uthank uthank uthank uthank u thank u thank u thank u thank uthank uthank uthank uthank uthank uthank uthank u
DT
· 1 year ago
Test under Powerbook G4 (X.5.4) in progress...
Thanks
You are gods (well, behind Steve).
Moo
· 1 year ago
With a little break of 3 hours sleeping tonight, i finally got it too. I had problems with the bootloader, so that die pineapple didn't disappear. So I had to downgrade to 1.4 and tryed the whole procedure again. In the end it worked.
So I just want to say the Dev Team (also i know, that they will not read all the 2000+ comments) that they did a realy good job and that I'm realy grateful. Thank you very mouch for spending your free time to help us using our iPhones as we want and not as Apple dictates.
peetre001
· 1 year ago
So is there any time frame for a windows release? I know this was just released, but is there one at least in the works? To spare the comments yes windows sucks blah blah blah
dan
· 1 year ago
thank you dev team
Name
· 1 year ago
I WANT TO SAY JUST ONE WORD: THANKS! Thank you for your work. You are my heros.
macshodan
· 1 year ago
Thanks for all your work from an Italian 1st gen iPhone user! You guys rock!!!!
cadujr
· 1 year ago
Worked like a charm Iphone 1.1.4 (4.6BL) Pwnaged using 1.1 ----> 2.0 pwnaged iPhone 1.1.3 (3.9BL) Anysim ----> 2.0 pwnaged
Everything worked ok, not a single problem I used the advanced option Many thanks to you guys
I have probleme with the new pwnageTool ,first Cydia ; i'm always in timed out (not internet connection error , internet work) i can't see lot of app in Cydia just terminal :( and always when i want to download somethings Cydia bug and i cant use itouch i have to restart then! can someone help me plz? i want to download icopter; mxtube ...etc like in 1.1.4 version by the way nice work lol but i prefere waiting for ziphone
Impretty sure you guys have things more interesting than reading around 2xxx comments, but i just wanted to leave mine here saying just this: THANKS! Really, it made my weekend. You are doing all this great job for free, you dont accept any donation, have to deal with so many negative comments like in this pasts days, still, give us this great piece of software. Thanks a lot, i really mean it. About Pwnage Tool, it worked like a charm. I just got the DFU problem, just did it manually and it worked flawlessy. Again, thanks for all the hard works this past week, great software, great team, no doubt. :)
bizzarefoods
· 1 year ago
again thank you, if the team reads this comment, i found a little bug, not sure whos at fault for it but.... pwn a ispw worked great did some installs with cyida buggy as hell, wanted to do a new boot logo... opened the tool went thru it again, got back to my phone no att at all, no phone. restoring to official firmware now, hopefully that goes well and i will come back later when things with 2.0/3g are smoother
Chris
· 1 year ago
Works great, first time upgrade from 1.1.4. Thanks a lot :)
felnas
· 1 year ago
thanks a lot guys, took me less then 20 minutes. Downloading the official update was the longest.
ViO
· 1 year ago
i would like ta say "iphone-dev's rule" and a big thank you for helping me hax my beloved phone.
it's like x-mas in a rainy july day... =)
thanks on behalf of #ilounge aswell =)
Stu
· 1 year ago
Great work guys, all done and working!
:-)
blorg
· 1 year ago
For those of you who are having problems with mail.app (crashes after it starts). Doing a reset of all data and settings (takes an hour) will fix this problem.
The only problem is that it breaks cydia installer app. cydia now crashes as soon as you load it up. Anyone have any idea on how to fix this problem?
uriaman1
· 1 year ago
Dev Team thank u very very much for your incredible software.I liked it very much but I would like to ask if anyone knows any cydia sources with apps and games that work on 2.0 firmware.
thnx in advance! :)
Jaakko
· 1 year ago
Unlocked 2.0 software on 2G iPhone :D with one problem. The SEND button in SMS is not working :( Anyone else having this issue?
Jaakko
· 1 year ago
It's actually a touch screen issue. The middle "row" of the touch screen isn't registering touches properly. Was working before upgrading and unlocking. Running 2.0 on 2G iPhone.
Chocolate
· 1 year ago
many thanks cimkeri for the detailed explanations, just followed your directions and successfully updated. Also massive respect to the Dev Team for their fantastic work on this! Looking forward to the same for the 3G version.
HermesX
· 1 year ago
Is anyone outside the U.S. or other countries with iTunes store support having trouble accessing the app and music stores on their iPhones? I'm in UAE and now after upgrading, my iPhone won't load music store, saying it's not supported in "your country" and the app store won't let me purchase anything even though I have an account in the U.S. store. Any thoughts or similar experiences?
krustytroll
· 1 year ago
thank you very much dev team!
Kelli
· 1 year ago
Pwned is wonderful!!! Thanks Dev Team! So I've updated to 2.0
But now my edge isn't working on my phone. I have t-mobile and have tried the wap.voicestream.com password in the apn under Cellular Data Network and restarted phone after entering setting.
Any ideas?
bebbzor123
· 1 year ago
dev team, could you give us an answer when the windows come for downloading!? my iphone is useless until you release it. the guids how to downgrage from 2.0 to 1.1.4 dosent work.
mat
· 1 year ago
I have downloaded the iPhone1,2_2.0_5A347_Restore.ipsw.zip file and habe renamed it to iPhone1,2_2.0_5A347_Restore.ipsw
When I try to open this file with Pwnage 2.0 it gives me the following Error:
Your software is superb. It activated, unlocked, and jailbroke my iPhone, in less than an hour (at 3am in the morning) , all without any errors or any hassles.
Well done, you should be proud of yourselves as good software is hard to find these days. Thanks again
Nerdy
· 1 year ago
magic!!! a bit buggy here and there.. but with some trying.. thank you very much guys!
alamedero
· 1 year ago
Thanks guys!
I followed the instructions and everything worked perfectly. I'm lovin' it!
schwede
· 1 year ago
Thanks to the dev team for the great work.
Dnerve
· 1 year ago
Amazing Tool! Impeccable work! Way to go DEV TEAM! Thank you sooo much!
iPodTouchFanboy
· 1 year ago
It seems some of you have problems with your iPhones. But I have troubles with my iPod Touch. Pwnage can't find any .ipsw files. I downloaded a 2.0 FW and it worked on my iPod. But when I tried to jailbreak it, the tool couldn't find the correct .ipsw? Can anyone help me?
scot909
· 1 year ago
You need to download a 2.0 firmare from the internet, not through itunes
Jens
· 1 year ago
.. WE ALL LOVE YOU !!!!!!
keep up the good work, couldn´t be any easier or more foolproof !!!!!
by the way, got error 1600, created folder, started all again, worked.
frans
· 1 year ago
GREAT! THANX
Alex
· 1 year ago
Thank you so much!!!
Tassos
· 1 year ago
worked fine, I had to empty the device support folder as mentioned in update 3. Restored from itunes backup afterwards and all setiings are intact. SUPER COOL :):):)
Martin
· 1 year ago
many many thanks from Berlin - Germany. Everythink works fine!
F***ING HELL, YES, IT WORKS!!! (after 6 hours...) ;-))))
But I really had problems with DFU and Restore Mode...
And my girlfriend hates me...LOL
Sedikit
· 1 year ago
Thank u very much. Works with Tiger and iTunes 7.7
speckyboy
· 1 year ago
I dont understand why people keep giving links for windows pwnage for 1.1.4. All windows users are actually trying to get the pwnage tool for 3G Iphones. We dont have one yet. I hope the dev team is doing something. Or else all windows users cant JB. I am happy for all mac users. But im still waiting on the Windows version. Unless teamdev has already done their job. Which means that they are only doing a version for mac users. Which really blows.
zepperd
· 1 year ago
Wooow, this PwnageTool did work fine for me on my 1gen iPhone. Follow the post written by cimkeri and it will work. The only one for me was: needed to switch to another Apple, MacBook instead of MacBook Pro. But is working great now.
Thx Dev Team for the great work
zwmg
· 1 year ago
Had an already pwned 1.1.4 FW iPhone before and did everything like explainend in the first post (thx cimkeri). Everything went perfect and without any problems.
Thx very much to the dev team!
Hawk
· 1 year ago
Hi, great job, I finished this and got iPhone1,1_2.0_5A347_Custom_Restore.ipsw But how can I install this to my iPhone? I have iTunes 7.7 so I can´t restore with that one. If someone know this, please share it with me :) Regards, H.
scot909
· 1 year ago
You can with 7.7, hold down the alt and option key on a mac and press restore
Aabo0
· 1 year ago
Will this work on Vista?
Sedikit
· 1 year ago
Thanks very much. Works with Tiger and iTunes 7.7 as expected.
stoge7
· 1 year ago
just one litle thing to say from Switzerland...DANKE SCHÖN...smile... great job....
Windows User
· 1 year ago
has anyone tried this on their 3G? Windows users?????
After doing a reset of data and settings to get email working, now youtube and cydia are not functioning.
cydia crashes. and youtube gives me the old school “You must first connect to iTunes with an Internet connection to enable Youtube”??
Anyone else have this problem?
tennisbjorn
· 1 year ago
what is the difference of ekspert mode and simple mode in the jailbreak??
Matt
· 1 year ago
If I use expert mode (primarily to expand the root partition) to generate the restore image on my iPhone 3G, the cell network doesn't come up. It just sits there with no signal bars. If I use simple mode to generate the image, it works. But the partition is small!
That said, it works fine on my iPhone 2.5G. Something I'm doing wrong or a bug?
MuscleNerd
· 1 year ago
Whatever you're currently choosing for the "Activate" checkbox in advanced mode, choose the opposite :)
and you can have 2.0 fully working no your iphone. ive done and works fine
speckyboy
· 1 year ago
does this work with the iphone 3g for windows is what i want to know
ravinas
· 1 year ago
Anyone having problems with the mail app? It does not start up.
MuscleNerd
· 1 year ago
When iTunes recognizes your iPhone after the restore, create it as a new iPhone (not from a backup). On your first sync you'll get back all your stuff anyway.
m0
· 1 year ago
Any date for windows release?
Windows User
· 1 year ago
i searched "iPhone 3G Pwnage Tool Custom Firmware" in a torrent search. Has any one tried that custom firmware in windows yet???? it says its for the 3g
SWA
· 1 year ago
Hi,
I just upgraded to IPSW 2.0 from my previous 1.1.4 using Pwnage Tool 2.0. I just wonder why there is not Installer.app? Somebody here has already said that there has not been released working implementation of installer for 2.0 yet, but i have seen it on ypoutube already...
Edwin Tam
· 1 year ago
You made my day! This is the single most important work that has been done again and again on every generation of iPhones and with a success each and every time. Without you, the iPhone is still great but not *that* great! The iPhone was not my dream machine but because of you and your works, it has become one! Thank you soooooooo much and we all love you, you know :-)
Ray
· 1 year ago
Apart from the iPhones dev teams pwnage tool, is there anything else one can use to unlock an iPhone 3g? I hope iPhone Dev's don't get mad me asking this question.. =|
MuscleNerd
· 1 year ago
dev team doesn't get mad at questions :)
There are currently no other methods to jailbreak iPhone 3G other than PwnageTool. And there are no methods at all to unlock iPhone 3G to other than official carriers. People are working on that second one:)
Taz
· 1 year ago
Worked like a dream - thanks guys
Jim
· 1 year ago
tried it out earlier this morning. I went into DFU mode but the pwnage tool wouldn't recognize that the iPhone was in DFU mode, tried over and over again but it wouldn't recognize it. iTunes would say that it found an iPhone in DFU mode and needs to be recovered, so I just tried to do a restore with the custom firmware that pwnage tool created but it got an unknown error that's not the error listed in update 3. So, I gave up on pwnage for now and restored to factory firmware. Not much point in me doing the pwnage now since I'm a happy AT&T customer and non of the Installer.app apps are made for the 2.0 firmware yet. But, it was fun trying.
MacProk
· 1 year ago
Finally it reports "Failed to enter DFU mode" and does nothing :(
swiitii
· 1 year ago
Divine, thx a lot
Mori
· 1 year ago
Keep up the good work and release please the Windows v. at earliest Many thanks mori
stephanie
· 1 year ago
I am on 2.0 now, had no problems people who are having DFU problems when it says if you have pwnage before click yes even tho you haven't as i did that and it worked and click on restore select the custom firmware and it works like a charm only prob was tho my contacts didn't back up and now all my contacts are gone now i got to get everyone phone number :(
andrecarrilho
· 1 year ago
Not just PwanedTool 2.0 but other tools: all firmwares, iBricker, ZipHone, PwanedTool (Mac & Win) 1.1, iLiberty (1.2 & 1.3), iTunes (7.5, 7.6 & 7.7), ZiPhone (3.0), Baseband downgrade (for those who have upgraded to 04.05.04).
Hi, Ive just installed IPSW 2.0 but have 2 qestions? 1) Why is Installer.app not there? 2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
bilibou
· 1 year ago
Thank you very much .
swa
· 1 year ago
Hi, Ive just installed IPSW 2.0 but have 2 qestions? 1) Why is Installer.app not there? 2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
Phil
· 1 year ago
"Sry, i haz Fail!"
Hey Guys, i've a little problem here to create the custom ipsw-file for FW 2.0. (iPhone 2G) The log says: " Making Core Files Installation" -> FAIL (In Expert-mode, also in Simple-mode)
I'am trying and trying to solve the problem, but i don't know how!
Maybe you can help me creating the customized ipsw-file?!
Thanks for your Help!
Tsagadar
· 1 year ago
Similar problem here - no matter what I try on my Intel iMac the ipsw creation fails at the step "Detaching root filesystem from '/Volumes/BigBear5A347.M68OS'"
Tsagadar
· 1 year ago
Probem was fixed adding an empty folder "Device Support" in Users/"user"/Library/iTunes
swa
· 1 year ago
Hi, Ive just installed IPSW 2.0 but have 2 qestions? 1) Why is Installer.app not there? 2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
iplay
· 1 year ago
hey Dev Team I'm on a loop and every time I restore my iphone with your custom.ipsw I have the same situation over and over. I have try, but i need your help. Please guys some inf...
MuscleNerd
· 1 year ago
Catch your iPhone just after you see the pineapple and put it into recovery mode (if you see pineapple then recovery mode is sufficient for this). You can get into recovery mode by having iPhone connected via usb and then holding down both power and home buttons until you see steved cartoon. Once you are there, do a normal recovery mode restore of your custom ipsw (or, if you like, Apple's ipsw).
valle
· 1 year ago
AT Dev team (musclenerd)
I also have the same problem and did what you wrote, but it is a no go. Pineapple is there, got into recovery mode (cartoon), in iTunes I choose custom and when ready it still just reboots after 7 sec of pineapple. Also did the restore (cartoon mode) to original apple firmware and that works. Is the phone still pwned (pineapple doesn't show) but without any custom apps?
BTW, if it helps in any way I did download a custom firmware from thepiratebay and it did not do the reboot(!) but unfortunate I had the "no service" so I returned back.
I am on Iphone 3g.
Could it be that there is something wrong with the building of custom firmware? I had the 1600 error which I resolved using update 3.
Hey guys I need some help. I have tried to follow every step from this blog and realy every time i used the Custom.ipsw, the iphone get s in a loop mode that restar every 7 s. I can restored but every time i try it gets the same over and over. PLEASE some Help.
MuscleNerd
· 1 year ago
please see response below :)
RW
· 1 year ago
You are the best ! thank you very Much, I love you guys !!
mathijs
· 1 year ago
[url=http://www.hosting-inside.eu/PwnageTool_2.0.zip]Here[/url] is another miror, let's share the load.
Cheeser
· 1 year ago
Great! Thanks a lot guys!
Richard
· 1 year ago
Thank you so much I can not express how grateful I am
mat
· 1 year ago
Thanks Guys! After I have downloaded the correct ipsw file via iTunes pwning worked like a charm!
You are the best!
VinScap
· 1 year ago
Does anyone have a Youtube video of this process? I have a first gen iphone with the 2.0 firmware I downloaded from Apple on the 11th. When I am in itunes and check for updates it shows I have the current version. When I try the tool it give me "no firmware bundle found". Any ideas on how to make this work?
Thanks!
random_guy
· 1 year ago
those moveing icons when you are building an ipsw are weird. am i the only one who thinks that?
Simon
· 1 year ago
How are people doing with the T-Mobile 5.99 service on 2? I cannot get it to work under 2. It worked fine under 1.1.4?
Jay
· 1 year ago
First thank you so much for the hard work. On my part push does not work for me on my iphone.... I have to do it all manually, sucks big time! anybody else?
Chomby
· 1 year ago
if you dont want to set up your phone as new device to get the mail app working you can simply install terminal via cydia, type login, then root, then alpine and then after it logs in type in rm -fR /private/var/mobile/Library/Mail exactly as spelt there and simply sync again with itunes and it will reload all your mail stuff. basically this just deletes mail folder and then reinstalls. but it works
Dutch_Legacy
· 1 year ago
I would really reinstall my pc with mac software to pwn my iphone., But it really depends on how long it takes for the Xp version of the pownage tool to come out. I hope someone can tell me how long it takes ???
Next to this question i just want to tell Dev team here that they really rock ass, Apple, Atm, Tmobile and much other providers hates you guys so much now, and they cant do a thing about it, hahahah
So tonight i WILL smoke a big blund on youre names goncrats Dev team, you create smiles on ppl's heads ; )
mcskive
· 1 year ago
Danke an Euch alle!!!! Wirklich groß!
marcos
· 1 year ago
Hi Folks... new to all this so hoping for some help...
I've got an iphone 1g which i was given, it has already been upgraded to firmware version 2.0... So I started using the new tool but it says it can't find the firmware and would I like to search the internet, which i did and downloaded the 2.0 software. But all that is in the download is some .dmg file that wont open coz it's password protected and a bunch of other files. I've only got an ipod touch atm, and need to unlock the phone to use...
So firstly could anyone give me guidance on what to do???
how to get the firmware properly? should I do a restore on the phone using itunes? and once the restore is done am i going to need a valid sim to boot it up again???so should i go get a valid pay as you go sim? some guidance would be much appreciated. I presume once i've sorted this probelms the pwnage tool will sort the rest?
Thanks
Hemmik
· 1 year ago
Thanks for the app guys! Great work!!
AlohaiPhone
· 1 year ago
Here is another mirror because some seem to be really slow :
Hope this helps guys, and Dev guys.. don't hesitate to put it on your post :)
Cheers.
iamsparticus
· 1 year ago
Hi Folks... new to all this so hoping for some help...
I've got an iphone 1g which i was given, it has already been upgraded to firmware version 2.0... So I started using the new tool but it says it can't find the firmware and would I like to search the internet, which i did and downloaded the 2.0 software. But all that is in the download is some .dmg file that wont open coz it's password protected and a bunch of other files. I've only got an ipod touch atm, and need to unlock the phone to use...
So firstly could anyone give me guidance on what to do???
how to get the firmware properly? should I do a restore on the phone using itunes? and once the restore is done am i going to need a valid sim to boot it up again???so should i go get a valid pay as you go sim? some guidance would be much appreciated. I presume once i've sorted this probelms the pwnage tool will sort the rest?
Thanks
Ricos
· 1 year ago
Need direction to a STEP BY STEP guide for Iphone 3G
w
· 1 year ago
can your iphone get bricked
rastaman
· 1 year ago
Many thanks this work well! The device (iPhone 8Go 1rt edition) appear not activated in XCode though...
freddy710_0
· 1 year ago
After using the new Pwnage 2.0 and restore with itunes the mail programm on my iPhone 2G does not work anymore. All settings are ok but Mail still not work. I need help! Whats wrong with my iPhone?
Dutch_Legacy
· 1 year ago
I would love to install Mac on my computer just to to pwn my iphone :) But i hope someone can tel me when the XP version will be launched ????
Next to this question i want to tell Dev team that they Rock Ass,. You guys just pissed of Apple, ATM, T-mobile and lots of other big miliondollar company's, and there and a damn thing they can do about it hahahahha
Tonight im gonna smoke my weed in you're name :) Greetings from Holland...
Just 2 Mirrors for the community! Hope this helps someone...
vnni
· 1 year ago
i upgraded my firmware from 1.1.4 to 2.0, so my iphone is now locked. i spent a few hours downgrading itunes and firmware to unlock it then i discovered dev's news and i upgraded it all again. now i'm stuck with the 1600 error: pwnage tool says it's all right, i always delete the "device support" file etc., but it still doesn't work. is it because the iphone was just re-locked (on its screen i can only see the itunes+usb image, or the DFU black)? help?
Cyberg00se
· 1 year ago
A Public Service Announcement for those of us in Euroland: If you're using the jailbreak to remove the volume limiter, there's no rush. The location of the limiter has changed and there doesn't seem to be much out there about it yet.
Still though, the jailbreak worked like a charm. Thanks dev-team! :-)
to fix the mail: 1:install terminal via cydia 2: type su - then password "alpine" 3: type chown -R mobile:mobile /private/var/mobile that's all - greatings from switzerland - rené
Csabee
· 1 year ago
I say thank you for it Dev Team! The Windows there is not a version yet outside, but I managed to put it up brain based on description. WORKS!!
speckyboy
· 1 year ago
did u do it with ur 3g iphone? which link did u use for the description?
geoduff
· 1 year ago
Thanks alot dev team .Pwned two phones and it worked a treat .Take your long deserved break.
speckyboy
· 1 year ago
Seriously? I hope u didnt mean it when u said "take your long deserved break" because windows users will get p*ssed off. Spare a thought for windows users please.
beercake
· 1 year ago
"Update 6: Mail application not working at 2.0? Please restore to your custom ipsw (you don’t need to DFU restore if you are pwned, normal restore will work now too) but then select “Set up as a new iPhone” when iTunes asks. Your first sync will bring back all of your settings anyway."
-> Yes, but then you loose all your SMS messages stored on your phone...
Jesse
· 1 year ago
I managed to pwn my iphone, but now whenever I connect to iTunes, iTunes freezes up with the spinning ball. Then when I disconnect the iphone it goes back to normal. PLEASE HELP!!!
Luke70
· 1 year ago
works perfect! Thank you very much, greate! Is there a option to do installer too?
Kunj
· 1 year ago
Thanks for the hard work and the 'entertaining' week of blog refreshing!
rje
· 1 year ago
I did it once and no jailbreak. I'm doing it a second time. I hope that perhaps you can post step by step instructions, including what to anticipate.
You guys are the best.
Luis
· 1 year ago
PwnageTool 2.0 is not opening up on my 10.4 Powerbook G4. Is the software only compatible with Leopard, or am I doing something wrong?
odysseus
· 1 year ago
YouTube doesn't seem to work. I'm a T-Mobile user, and it worked before.
MrWizard
· 1 year ago
No problems with the jailbreak, but now when the system comes out of screen lock I loose my service with AT&T. If I leave where the screen doesn't unlock, the service stays up. Just when coming out of autolock. You see the bars for a few seconds, then No Service
ew
· 1 year ago
grazzzzzzzzzzieeeeeeeee!
gubbel
· 1 year ago
First of all, i dearly would to thank the iphone dev team for the hard work that they have done.
For the People who have problems to launch the applications. If the application bounce go into your activity monitor and kill the process ps under all processes and the applications launches.
Mr T
· 1 year ago
Thank you ever so much!!!!!!!!!
Peterke
· 1 year ago
You guys made the Sunday again a holy day
What else to say then THANK YOU
Dirk
· 1 year ago
Extraordinary thanks to the team. As an unlucky Australian, I don't get much support from Apple, and it's only through your efforts that I can get the full potential out of my 1st gen unit. Where Apple fails its users, groups like yours step up and provide the functionality that shouln't be region-based to begin with. My 3G phone is on the way, and I look forward to your contined exploits.I hope you can see past the frustrations of those having problems at the moment. I had a couple of hickups, but in the end my iPhone worked as advertised, and your interface is great. May the gods of exploits shine on all your future efforts, and a thousand times thankyou.
valshare
· 1 year ago
THANX! for the great tool!
All worked perfect for me! You are the best! You have my respect.
Rollo
· 1 year ago
Like for some other poor guys here in the comments, the pwnage tools crashes on startup here. The icon starts jumping, after a certain time you get the pwnage menu on the top left of the screen, but there is no GUI showing up. I use OSX 10.5.4., it does not matter whether iTunes is running or not or whether the phone is attached or not. I updated the phone to 2.0 using iTunes 7.7 prior to using pwnage. I tried restarting the mac, but I still can't open pwnage.
HALP!!! :-(((
JK
· 1 year ago
When will you release the software to unlock the phone
fradelpra
· 1 year ago
I love you guys.
Firebird2k
· 1 year ago
Finally got it to work..
I downloaded Cocktail http://www.maintain.se/cocktail/index.php and ran it. I chose Pilot. Clicked on options and under Caches : 1 - System - chose all options 2 - User - chose all options for single user 3 - Internet - left it all unchecked
Left everything else default and ran it. Took a good 20 minutes... Rebooted.
Ran pwnagetool and lo and behold, it came right up!
Hope this helps others..
Rollo
· 1 year ago
What was the problem you wanted to solve doing this?
Rollo
· 1 year ago
Hello?
Baadshah
· 1 year ago
Thanks a lot for this jailbreak + unlock, i used that windows way to install 2.0 firmware, and it works fine. I just have a question. why is there no good apps in cydia??
e.g MxTube Orb Wallpaper Labyrinth
etc etc
and how can i get all my sim contacts in this 2.0 firmware, all my contacts are away.
And when will installer come, installer is much better then this shit cydia.
pls do something.
Griff
· 1 year ago
FAIL. Keep getting an error (6) when restoring from custom .ipsw. Then the only thing I can do is restore from normal apple restore.
vc
· 1 year ago
I pwned with success but:
1- Have no wifi (can see the bars, the name of the network, but does not connect) 2- Have no edge settings menu (APN)
Both are reason enough to go back to 1.1.4
Anyone with same problem?
guess
· 1 year ago
error 6 and general notice!
user with error 6 have to disconnect iphone until pwnage will ask you for connect. its very important! I think al lot of people understand that!
After that it works!
Cedric
· 1 year ago
THANK YOU ARE THE BEST GUY'S !!!!!!!!
thepatient24
· 1 year ago
Awesome job Dev Team!! It took a little bit of doing, but thanks to your updates and numerous posts from all of the people on this board, i was able to get past error 6 and 1600 and my iPhone (1st Gen) is up and running!!! Thanks a ton for all of your hard work on getting this out and in such quick fashion. Excellent!!!
lad_jr
· 1 year ago
PwnageTool2.0 is not opening up on my 10.4 G4 Powerbook. Is it only compatible on Leopard, or am I just doing something wrong?
Denis
· 1 year ago
Any one can post a pwned ispw on rapidshare? For Windows user. Thanks.
Saleh Abdel Motaal
· 1 year ago
First of all, great job. I had trouble but it is not expected that you guys cover every messed-up jailbroken iPhone out there. I was getting the DFU fail and then the 1600 fail. I used iLiberty+ (the tool used once to unlock the 1.1.4) to Enter Restore and then used iTunes 7.7 (current version) to upload my custom Pwn'd firmware.
I tried to enter DFU but this meant I had to rebuild a firmware on restart of Pwnage process, and failing would mean more and more time. So I figured this way (above, if it works and it did) is faster for people with similar problems.
I bought my phone from someone that had no clue how it was first jailbroken and suspect a cheezy method causing me trouble all the way!!! If you have no clue like with my phone then this is a good and fast route to try.
Cheers and Great Work Guys
msebastian
· 1 year ago
Thanks Dev Team! Worked like a charm here in Toronto! I ran it 3 times just to be sure.
Great work guys. Thanks again. Using my 1.1.2 OTB AT&T Iphone on 2.0 in Australia.
s0b
· 1 year ago
Im runing PwnageTool 2.0 in windows with VMWare. Thanks a lot.
cleazenby
· 1 year ago
yayyyyy
spliffalicious
· 1 year ago
HEY there all-
Issues:
Have multiple copies of the 2.0 Tool but none of them seem to work. (copies, cause I wondered if I have bogus files from a twisted poster?... but not? still can't say... can't get it to "run"
I get the files, unpack them, double click, get the icon in my app switcher and can force quit it, and only have the App name in the top left (of the screen.... no other menus and that app name is not selectable.)
I've RS'd, reset PRAM and power management. 'm on a G$ iBook (because my freakin MBP sh*t the bed this week, and somewhere in a FedEx truck) RS'd,
I've updated, RS'd and attempted in normal and DFU and still no avail... PwnageTool does nothing more than sit in background... never seen a GUI or anything.
what can I do?
Griff
· 1 year ago
BIG BIG FAIL I attempted pwnage. Failed. Tried to restore from official Mac restore.. Worked. Not it says my backup is corrupted or not for this device. I wish I hadn't bothered. I've lost EVERYTHING
Phil
· 1 year ago
Many thanks from Germany! Keep on thinking different!
Phil
dannyboy726
· 1 year ago
pwnd using windows version evrything working spot cheers guys
I love Gunny
· 1 year ago
unlocked two iPhones 1G, it works well now...
THANK YOU, where can I send a donation to?
borahm
· 1 year ago
i cannot send mails through the iphone with mobile me! with my ipod touch (not crack) it works fine!
anybody the same problem?
Firebird2k
· 1 year ago
For those who have the bouncing app icon and it doesn't work...
Finally got it to work..
I downloaded Cocktail http://www.maintain.se/cocktail/index.php and ran it. I chose Pilot. Clicked on options and under Caches : 1 - System - chose all options 2 - User - chose all options for single user 3 - Internet - left it all unchecked
Left everything else default and ran it. Took a good 20 minutes... Rebooted.
Ran pwnagetool and lo and behold, it came right up!
Hope this helps others..
Rollo
· 1 year ago
THANKS. I'm just going to try this and will come back to report here.
Rollo
· 1 year ago
Sorry, no success. The problem persists. Pwnage starts with a jumping icon. If it stops and you click on the icon the top left menu "PwnageTool" appears, but it does not react, i.e., the menu does not open.
Anyone with more success? D**n what can I do to unbrick my phone?? (There is 2.0 waiting to be pwned at the moment...)
Dipan
· 1 year ago
I owe a big thanks (and some donations) to the iphone dev team. Successfully used the pwnage tool and upgraded to Iphone 2.0 software. WORKED WITHOUT A SINGLE HITCH. Didnt face the DFU issue at all - the pwnage tool instructions are clear and ensured that even lay users can di it easily.
arpesenti
· 1 year ago
Thank you very much!!!! Very good work!
Freek Akkermans
· 1 year ago
Thank Youuuuuuuuuhouuuuuu!
Amazing! Thanks so much!
kenhru
· 1 year ago
Thanks!
chris
· 1 year ago
An where is the PC version????
synobazz
· 1 year ago
u don't need to set up your iphone as a new device! just log in onto your iphone using ssh, and change the mail folder to 777 (chmod 777 /var/mobile/Library/Mail). after that it should work too
superbowl
· 1 year ago
i even would love sundays more, if you can release a windows xp version ;-)
superbowl
· 1 year ago
i even would love sundays more, if you can release a windows xp version ;-)
D
· 1 year ago
Here is a video of the process of upgrading a 1g 1.1.4 to 2.0
Although, It failed to put the iphone in DFU mode. I simply opened itunes and pressed alt+restore to chose the pwned firmware. Worked great
Thank you dev team :)
aka_b_fi
· 1 year ago
Awesome - works perfect - thanks guys - made my day !
mfong
· 1 year ago
After many long hours, I finally got the jailbreak to work for the 3G iPhone. I'm a first time user of the Pineapple program. I kept getting stuck when I was reading the log and the log said that there was error, the next wall I hit was when I encountered an "unknown error 6", and finally the last stop I hit was when iTunes said that it has encountered an "unknown error 1600" or something like that.
I learned that DFU mode doesn't mean that you should be able to see USB plug and the iTunes icon, mine was black, and I thought I had bricked my phone. Also, my phone was synced to a Windows computer, but luckily my laptop was a MBP. This is what I did:
*Ignore this step if you already have the phone synced to a mac machine 1a. Start as a new phone restore on iTunes 1. I made the "Device Support" folders in BOTH my system and user library directories, I'm not very leet at Macs, so I just did that, couldn't hurt right? 2. Ran the pwnage software, and had it make the custom ISPW file. 3. While that was running, I put my phone in DFU mode, and the phone was unplugged from the computer. To put your phone into DFU mode hold the power and home buttom for 10 seconds, then after 10 seconds release the power button, while still holding down the home button for an additional 10 seconds. I had a black screen, and once again I think having the iTunes icon with the USB icon is not DFU mode. 4. Plug in your phone. iTunes will say that it has found a phone in "Recovery Mode", hit ok and leave iTunes open. 5. Once the pwnage software has made your ISPW software, I said "no" to the question of having my phone pwned before. Then it would get stuck at the screen where it says to power off your iPhone. I left the software run, while I used iTunes. 6. Hold option/alt and I clicked on restore, I found the custom ISPW file on the desktop, and that should be it.
Again, I got stuck 3 times: where the pwnage tool said that there was a log failure, iTunes gave me an error 6, and iTunes gave me an error 1600. I just wasn't in DFU mode... I think. So make sure that your screen is black. That is what worked for me. I hope this helps.
ziggotron
· 1 year ago
This might be a little weird, but I'm using an iPod touch and both my Mail and Safari apps do not work. They both crash out immediately upon launch. Any ideas or help?
Much help would be greatly appreciated.
mfong
· 1 year ago
Also, thank you to the Dev team. I have never used your software before, but I also hopped onto the jailbreaking train late.
Thanks
daveed
· 1 year ago
One of my friends got a sweet iPod from Transcendent Innovations a few years back and another friend of mine just got an iPhone. Bastards. I wanted in on the pie so I signed up for an account to get the ball rolling on my free iPhone. You can get one too .
Still getting the "ihazerror" going into DFU mode with pwntool 2.0 and when I enter DFU mode (getting the picture of the usb cable pointing at an itunes icon?) and restore the image, I get "unknown error 6" every time.
I have tried with these options at different settings: 1) Activate yes and no 2) Partition wipe-out yes and no 3) Logos enable and disabled
I always disable Installer app and always enable Cydia.
Does anyone have any advice? Is there a manual way to jailbreak that I can try?
master_burn
· 1 year ago
DFU mode is identified by an iPhone recognized by itunes but no logo in the phones screen - if you see the ituneslogo and cable you are in recovery mode not in DFU.
Great job! Did you received my Postcard? Thanks a lot for the very neat application! It works perfectly!
felipe
· 1 year ago
where should I find the app for windows
hank Chang-Tse Du
· 1 year ago
thank you iphone DEV TEAM, after a long while of trying to fugure out what to do i have finally unlocked my iphone to 2.0, thank you for all your hard work!
Te Blub
· 1 year ago
From Amsterdam, thanks to the dev team for the great work! It all worked according instructions! No need to buy a new 3G phone....
deathfromabove
· 1 year ago
can anyone please help me?? i tried it and it did not work i had a 1.1.3 iphone opened with ziphone. now i used pwnage 2.0 and follow the steps. 1) i git the error , that my phone cannot be set to restore mode.. i tried sometimes and then i ( it did not work) i opened itunes and upgraded to firmware 2.0 .after that, i could not activate my phone ( your sim does not match...)
problem: i cannot downgrade to anything.when i try to get 1.1.4 on it, there is a itunes error 16/ 5/20... what can i do? i only have this one phone and now i cannot phone anywhere and i need to phone..
please please please help me thxx a lot
DG
· 1 year ago
oooh jeez! i've already spent a small fortune on the appstore. people have got to check out bet maker and it's program to make kits on your puter...
Max
· 1 year ago
What bundle do i need for my iphone 3g 2.0 ??
FoX
· 1 year ago
Fantastic tool :) I've upgraded to 2.0 on my 1G iphone with success Exchange push works flawlessly appstore too :)
Can't wait for installer :)
Thank you so much for this ;)
@luomat
· 1 year ago
Any chance you could post and MD5 of the original file so we know it hasn't been mucked with if we download it from a different site?
Alexandre Santos
· 1 year ago
Thank you! Two iPhones 1st Gen 8Gb working perfect with T-Mobile USA. EDGE is working too.
andy
· 1 year ago
How'd you do this. I unlocked my phone, have service for phome and vm, but no edge service.
Thanks
Carl99
· 1 year ago
IIIII LLLLLLLOOOOOVVVE YOUUUUUUUUUUUUUU
AM
· 1 year ago
THANKS A LOT!!!! you rock dev team!
Dave
· 1 year ago
THANKS DEV TEAM!
Doco
· 1 year ago
Thanks a bunch for all of your hard work!
bjcb
· 1 year ago
Hello from Portugal
Nice job!!! Dev Team
Hope your next release will be windows compatible and 3G sim unlocked.
Regards
PS: Vodafone and Optimus are thief's, 250 MB for web browsing in iphone plans, 10 minutes per day for navigation!!!!! it's a joke compared to other countries.
thegodsend
· 1 year ago
I had a first gen iPhone, once jailbreaked and unlocked with independence / anysim, then again with ziphone to version 1.1.2. Now i used pwnage 2.0 and everything worked absolutely fine! Thanks guys! :)
frosse
· 1 year ago
Way to go devteam :)
I'll stick around until 3G unlock will be here, though. :) But cool anyway :)
sarah
· 1 year ago
IF ALL YOU SEE IS A FLASHING PINEAPPLE AFTER COMPLETING THE PROCESS ( WHICH NEVER GOES AWAY) - CAN SOMEONE POST WHAT THEY DID TO GET THEIR PHONE WORKING? THERE ARE PEOPLE WITH THE SAME QUESTIONS ON THIS BLOG.
PLEASE HELP OUT IF YOU HAD SAME PROBLEM.....I'M GOING MAAAAAD!
T
· 1 year ago
worked first time :)
Raphael Vinson
· 1 year ago
Works great on my iPhone V1 US 16Gb ziphoned in 1.1.4. Thanks for your work !
robwell
· 1 year ago
Thanks very mutch!!! On my iPhone works perfect!
Ash
· 1 year ago
Bounce Problem possible solution Once the Pwnage icon is bouncing, launch the OS X Activity Monitor and kill the sub-process named "ps".
I did this and it worked!
i have a G4 powerbook 10.4.11
jutzuro
· 1 year ago
THANK YOU guys for this
Rollo
· 1 year ago
Still have the problem with the hanging PwnageTool like many others. The program starts with a jumping icon and hangs afterwards. No GUI appears. Does anyone have a solution for this problem?
HELP!!!
Rollo
· 1 year ago
Ash's solution seems to work. Kill the "ps" process using Activity Monitor ("Aktivitätsanzeige" in German, use spotlight to find). Careful: The process is only shown if you choose "All processes" (Alle Prozesse) in the drop down box on the top. THANKS ASH for your tip!
Bounce Problem possible solution Once the Pwnage icon is bouncing, launch the OS X Activity Monitor and kill the sub-process named "ps".
I did this and it worked!
i have a G4 powerbook 10.4.11
Setting APN
· 1 year ago
For those who need to set APN, you can edit /System/Library/Carrier Bundles/"YOUR_CARRIER"/carrier.plist and reset network settings.
Sohaibkkhan
· 1 year ago
Thank you DEV TEAM for a such brilliant Tool! BUT, when is this software going to be released for WINDOWS? as i know more than 90% of users are PC users and less than 10% are using mac. I hope that on monday the official release will also come out for windows users like me. Again, thanks a million for such a useful tool!
zichan
· 1 year ago
to fix mail crash do the following: 1) shh into the iphone
2) enter chmod 777 /var/mobile/Library/Mail chown mobile /var/mobile/Library/Cookies/ chown mobile /var/mobile/Library/Cookies/Cookies.plist
it does work for me:)
Roger
· 1 year ago
I got this error:
Detaching root filesystem from '/Volumes/BigBear5A347.M68OS FAIL
Need help, thanks.
Issic
· 1 year ago
"Phone" under "Settings" is missing! So the "Simtoolkit" cannot be accessed...
zachincool
· 1 year ago
IT WORKS!!!!!!! For everyone getting error 6 and all that bull, YOU MUST GO TO MAC HD>USERS>YOURUSERNAME>LIBRARY>ITUNES, if the folder "Device Support" is in there DELETE EVERYTHING IN IT. If it is not in there, make the folder. REPEAT PWN PROCESS AND BOO YA!
Goose
· 1 year ago
Guys....Very good work. A very commendable effort on a great tool, speedy update.
maxime
· 1 year ago
What bundle do i need for my 3g 2.0 iphone ?
Justin
· 1 year ago
does this tool work on all iphone firmwares? i'm runing 1.1.1 right now that is jailbroken and unlocked.
maxime
· 1 year ago
What bundle do i need for my 2.0 Iphone 3g ?
Thnx for the help ! :)
peter
· 1 year ago
Thank you all devteam and whoever put their work into this! Great tool, worked flawlessly.
Billy Solestis
· 1 year ago
Jerkwads. Read up on the right of private property and how it helped build modern civilization. Apple worked harder to develop and produce a product than any of you yahoos did to pwn it (not to mention the rest of you parasites who wait for others to figure out the pwn, then jump on and pwn for free). Apple put out the 3G with certain conditions (which carrier to use, etc.). If you don't like the conditions they put on the use of their product, USE SOMETHING ELSE.
Miles Philip Mackaness
· 1 year ago
I cannot under stand what to do, My iphone is updated to 2.0 and at&t won't activate. I have turned off phone with red slider. My PC won't allow me to unzip pwnage. Please help e-mail milespm@gmail.com. Thanks
Jerkwads. Read up on the right of private property and how it helped build modern civilization. Apple worked harder to develop and produce a product than any of you yahoos did to pwn it (not to mention the rest of you parasites who wait for others to figure out the pwn, then jump on and pwn for free). Apple put out the 3G with certain conditions (which carrier to use, etc.). If you don't like the conditions they put on the use of their product, USE SOMETHING ELSE.
MrWizard
· 1 year ago
Its not their rights to restrict how I use a device I lawfully purchased. Regardless of whatever click through they throw up or shrink wrap they put in the box. Read up on the landmark case of Otis vs GE if you want to educate yourself. There are more, but that set the stage for the US intellectual property laws and the governance behind reverse engineering and "hacking"
vlad andrei
· 1 year ago
how to downgrade from 2.0 made with PwnageTool 2.0 today back to 1.1.4 ???
PLS
Joker
· 1 year ago
Don't try to make us feel sympathetic for your "poor wounded server". It's completely inanimate and has no feelings whatsoever.
vlad andrei
· 1 year ago
How to downgrade back to 1.1.4 after PwnageTool 2.0 today ???
Jase
· 1 year ago
Thank you very much!
Abramo
· 1 year ago
Thanks guys!!! Your work is great!!! HACK HACK HACK
JOsef19
· 1 year ago
Not sure if already noted but works great on PPC machines running 10.4.10.
thanks again.
eljoergen
· 1 year ago
Everything works quite nice. Just a question: when syncing now with iTunes it tells me that there is an carrier-update which I can download... Any ideas?
^__^
· 1 year ago
Ok. This is great.
I'm getting a generation 1 iPhone this week. It will probably have 1.1.3 or 1.1.4 on it, and was windering, what steps should I take?
Do I need to update it to 2.0 first and then use this or what?
Krayola
· 1 year ago
To fix the Mail.app problem, install MobileTerminal from Cydia, then su to root (password alpine), and chown mobile Library/Mail/Accounts.plist
Bubonic
· 1 year ago
I had the email problem and the technique here fixed it:
Of course you ignore the 1.1.4 bits and just install ssh and run the command.
Zanza
· 1 year ago
MAN GREAT!!! This tool is really great. The first problem was to find the right bootloader files but that was not a really big deal but the tool works perfect thanks :)
daveed
· 1 year ago
iPhone 2.0 unlock and jailbreak for Windows[GET IT HERE]
whitecomet
· 1 year ago
Tried multiple times . . . I know I successfully entered DFU mode as it says on the pwnage tool. but my iTunes keep on saying "waiting for iPod" in my case im trying to unlock my iPhone 2.5G. after a couple of minutes it will give me an error. an iPod has been detected but it cant be identified properly.
zibri
· 1 year ago
Maybe you now understand why I spoke about DFU more than a week ago !
hope you´ll hack the new 3g :-) thanks for everything!
Lorenz Hänni-Dürr
· 1 year ago
THANK YOU - YOU ARE THE BEST!
Mahdi101
· 1 year ago
Can I donate?
Thargalt
· 1 year ago
Just to say awesome !!! Many thanks !
mrklippel
· 1 year ago
Hi guys,
i just updated 2 devices
1 x 1.1.4 iPhone ( pwned ) via normal restore
1 x 2.0 iPod Touch ..
i had some problems with the touch.. the DFU mode was correct, but i got lot's of 1601 errors tried over and over again...
then i tried this :
i put the datacable directly into the USB port of the Mac instead of the USB Hub
immediately when i did that, I was able to do a succesfull PWNage of this device..
great job Dev-team
tomorrow i will receive my 3G ( 16 GB White )
then i'll try that device...
thanx again,
mrklippel
kelly Hendricks
· 1 year ago
UPDATE----------------------------
To fix the bouncing app issue:
- Launch Pwnage Tool 2.0 - Open "Activity Monitor" (in utilities folder) - Find the process "ps" (make sure you look under "all processes") - KILL IT!
Pwnage Tool will now open!
Thanks to flag420 for discovering this.
Angry cunt
· 1 year ago
What about those 90% of us that don't have a mac? How the heck do we unlock the phone?
JoeyMoe
· 1 year ago
you buy a mac
hiimcliff
· 1 year ago
wow. didn't see this one coming. i honestly thought you guys were full of shit. good show.
as expected though, the release is chock full of bugs and people are still complaining that they cant get it to work. so all of that crap about taking your time to get it right wasn't even necessary. should have released it from the get go.
i had to install kalaway osx on my lappy on another partition to get it to work. but it did work. so thanks devs.
Hussain
· 1 year ago
You don't really need to run this program yourself. Someone can make it for you and then you just download that custom firmware and install it. But not all custom firmwares are equal, it depends on what settings you want (unlocked, jailbreaked, activated) or what device you have (iPod touch, iPhone, iPhone 3G)
yklad81
· 1 year ago
Fantastic so easy to use execept on my iMac Pwnage 2 didnt like it for some reason but it love the Mac Book Pro was up and running in about 30 minutes after I found the BIN files.
wes
· 1 year ago
i cant get into dfu mode ... it failed..whys that..? can we use itunes 7.7 on it?
Justin_Case
· 1 year ago
does this work with iphone firmware 1.1.1 with baseband 3.9?
filip g
· 1 year ago
thnks! from 1st generation iphone ;)
Suave b0b
· 1 year ago
I can has pwnage! Fanks!
macfreak08
· 1 year ago
I already upgraded to 2.0 before pwnage 2.0 came out. I tried to restore using the custom ipod touch 2.0 restore firmware, but I got an error 6. When I tried to restore to 1.1.4, I got an error 20 message. Do I have to be at 1.1.4 before I upgrade to custom 2.0 firmware? ITunes 7.7 won't let me downgrade to any firmware. I also tried downgrading to itunes 7.5 and it still won't let me downgrade to an firmware.
PLEASE HELP!
Justin_Case
· 1 year ago
does this work on all firmwares? i have 1.1.1 and never used pwnage tool before...do i have to upgrade to 1.1.4 first?
GJB
· 1 year ago
Happy iPhone 2.0 user here in Ireland. Thanks guys - great job.
Nick Ellaby
· 1 year ago
Just wanted to thank you, seriously your the essence and pride of the internet community. Also loving the new logo, i cringed at the last one, but you really have upped the game this time around.
CZ
· 1 year ago
Thanks for your hard work.guys.
nastynelson
· 1 year ago
Please help i have vista and i am tryng to unlock 1st gen how do i do it ???? i have downloaded the tool and im stuck !!!
Ekimalito
· 1 year ago
Youu guys are awesome!!
Thank you.. I've been waiting for this for a while...
P.S. Stop talking bullsh** about Zibri. He offered us a solution when we had nothing...
cola
· 1 year ago
Thanks from holland! Great app, love it
TJP
· 1 year ago
Thanks a million!!!!
master_burn
· 1 year ago
My iPhone is running in circles after updating to 2.0 with simple method. I get a black screen and then the annanas-logo then again black screen then the logo, black screen, logo .... Can anyone help me with that? It's a 1gen iPhone with 16GB
THX
68030
· 1 year ago
To all the people who just get a bouncing app in the dock - is it a case of works on intel but not on PPC? reading the posts it seems like a lot of ppl who it doesn't work for have ppc G4,iMacs etc. just 2 cents, works fine on my intel.
68030
· 1 year ago
nope, someones posted below working on PPC, oh well
jlg84
· 1 year ago
Hi all; I have upgraded my original 16gb iPhone to 2.0 using iTunes, and have tried to use the Pwnage 2.0 to jailbreak/unlock it, but each time I get the error that it failed to put the phone into DFU mode; if I put it in that mode myself, it also does not work. What am I doing wrong?? Should iTunes be open/closed when running Pwnage? Does it matter? This is my first time using Pwnage so I apologize for newbie questions...
roy
· 1 year ago
SOLUTION FOR BOUNCING PROBLEM.
OPEN ACTIVITY MONITOR AND FILTER FOR "PS", LAUNCH PWNAGE TOOL, YOU WILL SEE THE PROCESS "PS" LAUNCHING, FORCE QUIT THIS PROCESS AND BAM IT WORKS!
I found the Solution to the Problem i hope it works for you.
1. Launch Activity Monitor 2. Click on Show ALL PROCESSES 3. Launch PwnageTool 2.0 While its Bouncing go to Activity Monitor 4. Find a Process call ps and Quit the process.
As you will quit the Process the Pwnage Tool Should Launch.
I worked For me I hope Work For You Guys :):)
More Download Souces : [URL="http://rapidshare.com/files/131132370/PW2T.zip"]Pwnage Tool 2.0[/URL]
Your list of updates and possible problems hardly inspire any confidence...
Volkan
· 1 year ago
Hey all! have anybody find out why the iPhone cycles evrey 10 second? btw. why there is a loop of the logo? Need help!!!!
HL
· 1 year ago
hey all, I'm in trouble. I installed the iphone 2.0 software onto my 2g iphone 1.1.4 that was unlocked with zibri and now it stopped working. Anyone know what I should do next?
moo
· 1 year ago
restore your phone to apple's firmware, maybe that'll get rid of the unwanted stuff and run the tool again.
fshalabi
· 1 year ago
see, i was planning on buying the iphone with 40 dollars a month talking plan and 30 a month internet plan that is mandatory when you purchase the iphone. At&t (the company i was signing up with) told me if you choose to cancel the internet plan later on, the iphone will not be able to be used. I figured jailbreaking it would allow me to cancel the internet plan and still be able to use the iphone. whenever i choose to access the internet, i figured i would just use wifi or get charged the standard amount per byte. would jailbreaking allow me to do all this?
Lakers24dynasty
· 1 year ago
how do i get my 1.1.3 jailbroken and unlocked iPhone on 2.0 firmware?
daveed
· 1 year ago
Got Windows? unlock and jailbreak your iPhone 2.0 on Windows get it here
Asaf
· 1 year ago
Why did you guys leave that pineapple there? It's so ugly! No offense but I want the Apple Logo back!
Abráham - México
· 1 year ago
well then go to EXPERT settings and UNCHECK the custom images....you;ll have your apple back. The Dev Team doesn't ask for donations, at least keep their Pineapple :)
Raj
· 1 year ago
Great Job guys, the wait was worth it. A smooth tool (minor hiccups). Hats off to you guy's. Thank you Dev team.
berian
· 1 year ago
OOOOOOOOH YEAH!
Jeet
· 1 year ago
hey. i had the same problem as cimkeri.. now i looked for the pwnage tool 2.0 download i downloaded it . but instead of the multicolored apple sign as the application image. it was a cut pineapple. i tried opening . but nothing came on the screen i want to use my 2.0 1st gen iphone can u help me with the pwnage tool download and a few usefull tips
radesix
· 1 year ago
I had previously downloaded the 2.0 firmware on the 1st gen the night before the 3G came out. I am now trying to select the .ipsw file and it tells me the wrong firmware bundle has been selected. I saw another post about restarting Pwnage and also putting the ipsw in the same directory. Neither of these are working for me. Any ideas?
Zoof
· 1 year ago
Works like a charm ! Too bad the choice of applications in the Cydia installer is very limited... Thanks, Dev Team, great job !!
you guys rock!!! Simple as - it is plain to see who is are the main guys when it comes to the iphone
When is the intention to release a PC version? That will be the icing on th cake
Great work guys
Alex Kuo
· 1 year ago
i already pwned a 2G iphone with 2.0, can i just reuse the custom restore ipsw on another iphone? (the first one was successfully updated from 1.1.3 to 2.0, and this iphone is a virgin 2G iphone already upgraded to 2.0 but unactivated) thanks for the tool!
siechotic
· 1 year ago
Worked first time!!
Used an Intel iMac (10.5.4), ran the new pwnage tool, installed the pwned ipsw on my 8GB 1.1.4 first gen iPhone, which had been pwned before, everything went smooth as silk!
Thank you
DJ McG
· 1 year ago
Thank you Dev Team! You are the best! It looks great, you did an awesome job!
Bob
· 1 year ago
FOR ALL THOSE WHO JUST GET A PINEAPPLE THAT GOES ON AND OFF EVERY 10 SECONDS
SOLUTION THAT WORKED FOR ME:
Re- Download Pwange from another source - go through process again with new Pwange.Try That
adadaadd
· 1 year ago
=D
P1L3
· 1 year ago
Great Work Dev Team previously a 1.1.4 user now a 2.0 user but missing a view Apps from the old apptap installer....any news on when version 4.0 will be hitting which i assume will work on 2.0?.......just wondering
hhutchyy
· 1 year ago
Thanks alot dev team
Maart
· 1 year ago
"No firmware bundle found! Would you like te search the web for this fle?"
I've got iphone 3G(software 2,0), Macbook 2.0, tiger 10.4.11, iTunes 7.7 I think almost every 3G owner has these. So I'll go and wait till there is a newer and more compatible pwnage tool, with the unluck option for 3G's
U guys are awesome it was a success and i love my working iphone
Gavin Grant
· 1 year ago
The Dev Team are kings amongst men! 9 days after the 2.0 release and it's activated, jailbroken and unlocked!! Quite why anyone doubted the team is beyond me, they've never let us down and never will.
Thank you so very much, it all worked the first try (although I must admit to finding these directions very helpful http://arashpayan.com/blog/index.php/2008/07/). The one issue I am having, I have got it unlocked and switched from my UK O2 contract to an AT&T US pay as you go phone and that's working fine. But when I plug it into my Mac iTunes of course opens up and wants to restore it back to the last point it has two days ago. I can't sync my contacts, calenders, music, video or anything else because it won't get past the point of either restoring it or setting up a new phone. How do I get past this point, I assume this is more an iTunes issue but I'm hoping somebody out there has also had this issue and can give some advice - I'd certainly appreciate it.
Niclas
· 1 year ago
Problem: No Service with iPhone 3G (but not 2G-version) with PwnageTool 2.0
Ive seen three or four of those comments, and here is another one. Anyone have a solution/idea whats going on?
Tried switching location services, 3g on or off and also played with data roaming with no luck; still "No Service".
With the 2G-version everything works flawlessly.
Googling on the issue above gives lots of people with the same problem.
//N
moo
· 1 year ago
Unlocking does not work with Iphone 3G. That means the phone and not the network. You'll have to wait for the 3G phones to get unlocked.
Balu
· 1 year ago
I had that issue on my first attempt, too. I repawned the iPhone from first step on (starting with the original Firmware I downloaded before) and on that second try, everything works just fine. 3G, GPS and mobile phone is back!
spliffalicious
· 1 year ago
NOT WORKING ON MY G4!!! (and tested on an AppleStore Intel... brought file to the store...)
someone confirm?
Tee Too
· 1 year ago
Works great but WIFI is not working anymore. WIFI is not grayed but the iPhone scans without ever finding the APs around my house...
kekeee
· 1 year ago
when a version for windowsssssssssssssssssssssssssss pleaaaaaaaaaaaaaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
the end
· 1 year ago
Thank you dev team every thing works fine. used leo4all on my toshiba laptop to get it to work. Any other windows users that does not want to do this head over to iphone hacks they can help you.
Hey, Cimkeri 'I would like to know in your brief explanation on the part that says 'I browsed both of them respectively and then I created the custom ipws? Could you explain this in layman's words?
Thanks
Urania
pelau
· 1 year ago
@DevTeam - Thanks for all the hard work!
@cimkeri - wonderful tutorial!
Cheers!
spooky2k
· 1 year ago
Thank you so much dev team! I had no trouble using this software and think it is pretty clear on what to do. Kudos! You've done it again! Dan x p.s: iphoneunlock are up to their old tricks again. Just received an email saying 'custom firmware for 2.0 now available'. I'd suggest getting in touch again.
Mamath
· 1 year ago
MANY THANKS WORKED SMOOTHLY AT FIRST ATTEMPT
YOU GUYS ARE REALLY GOOD
YOU CAN NOT IMAGINE HOW THANKFULL I AM
urania
· 1 year ago
Hey, Cimkeri
I would like to understand in your brief explanation the part in which it says 'I browsed both of them respectively and the it created the custom ipws'? Could you explain this in layman's words?
Thanks in advance
cod3
· 1 year ago
is it just me, or is there no installer.app after pwning?
scot909
· 1 year ago
you can't get installer.app on 2.0
Abráham - México
· 1 year ago
*********************************************************************************************** ******IF PWNAGE TOOL JUST BOUNCES ON YOUR DOCK AND DOESN'T OPEN ******
Hey guys, I've been trying to make Pwnage Tool open on my Mac since yesterday but it wasn't working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor 2. In Activity Monitor, from the top Drop Down choose "All Processes" 3. Double Click on Pwnage Tool 2.0 4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called "ps" 5. Highlight "ps" and at the top of the Activity Monitor click "Quit Process" 6. It will ask you if you are sure, Click "Okay" 7. At this point, (once the "ps" Process has quit) the bouncing Pwnage Tool will settle and OPEN!
I hope this helps! It worked on my computer as well as my friends' and my boyfriends computers! Wish you luck, the Pwnage Tool is fucking awesome!
THANKS DEV TEAM!!!!! Greetings from the Texas-Mexico Border! (You all should consider posting this as "Update 7" there are lots of people who are having trouble opening the Tool on their macs) Thanks!
benj
· 1 year ago
Hi, because the servers are pretty slow, I uploaded it to my server too ;) who do i need to contact?
manicminer
· 1 year ago
Great work guys. Sounds like it works for a lot of people. My issue. iPhone 1G, fresh restore to official Apple 2.0 firmware. DFU mode and restored to custom firmware. Completes successfully but goes into a pineapple loop. Just keeps restarting. Never gets to bootneuter. Re-created ipsw several times with the same problem. Any suggestions?
banker
· 1 year ago
I still got the grey wifi problem. Would be nice if swifi could be integrated so that noobs like me can use it. thanks.
Leaker
· 1 year ago
Thank you! PwnageTool 2.0 works great! I tried it on my 1st gen iPhone 4GB and everything is working perfect! Here is a Tutorial on how to unlock / jailbreak your 1st gen iPhone (Mac users) in Greek here:
I've tried it in simple and expert moods and always get error 6 while trying the restore. I put the phone in DFU mood, the display shows the iTunes icon and a USB cord with an arrow in between. The phone is not plugged into me MacBook. I run and follow this; 1. Open up the pwned 2.0 2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work 3. Select the 2.0 firmware and also select relevant *.bins 4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6" 5. Go back to main menu and enter General Settings --> select Enable Baseband Update 6. Then build the firmware and save it to your desktop 7. Once the firmware is built, pwned will ask you to plug in your iphone via USB. 8. It will then step you through the process of enter DFU mode 9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded) 10. Hold down ALT (on MAC) and select the firmware on your desktop 11. iPhone will update - LEAVE IT for the entire process. 12. It should install and all will work :)
Why am I getting error 6 while doing the restore. I've restored it back to Apple Firmware 2.0 six times now and it goes through without a hitch but as soon as I load iPhone1,1_2.0_5A347_Custom_Restore.ipsw, I get error 6. Please help or I'm going to have to go to T-Mobile and buy a phone to use.
Edu
· 1 year ago
THANK YOU DEV TEAM SO MUCH!!!!!!!!!!!!!!!!!
haha Mac pwns!
Windows sucks hairy balls!!!!!!!!!!!
Rolyman
· 1 year ago
No Edge Option ?? WTF , anyone having this problem after upgrading from 1.14, i cannot set any apn as there is no edge option anymore, other than that thanks DEV Team , awesome awesome, just need some EDGE
Aaron88
· 1 year ago
omg!! i need help.. i havent slept.. iv been trying to do this all night and nothing./. i keep geting error (1600)
and yes my iphone IS in dfu mode.. and yes i did do update 3 like div team said to do.. and yeah.. nothing when i try to pwned it again..i dont get the you faild message.. but i do get the turn off ur phone.. and put in dfu mode.. when my iphone is already!! on dfu mode..
some one please!! help mee!!!
if you know what im taling about please email me and help!! i havent slept
please help me I only get this message in the log" a failure to prepare x12220000_4_Recovery.ipsw" and then it can´t get in DFU mode! What am I doing wrong, I ´m about to cry
rolyman
· 1 year ago
Hey DEV Team thanks for the awesome tool but is anyone having problems with NO EDGE SETTINGS OPTION ater doing the upgrade from a jb 1.14 , i am no longer able to use data over edge, on the VODACOM network south africa, voice etc is all cool
I've done it 4 times. Still no jailbreak that I can see. No Installer, no Cydia. How do I know if this works?
Keith
· 1 year ago
Thanks guys! It worked fine once I figured out the DMU bit
Raj
· 1 year ago
after unlocking & Jailbreaking my old iphone, i cannot locate gprs server settings anywhere. do other's have this problem?
nooitaf
· 1 year ago
firmware 2.0 doesnt have EDGE settings anymore .. annoing i know .. this is a good site to set Edge to a fake-apn (some random number that doesnt work)
go with you iphone to http://unlockit.co.nz install the fake apn settings now edge shouldnt work anymore
dc0511
· 1 year ago
No service whatsoever after pwning my 3G iPhone. This is obviously a serious issue. Does ANYONE have any solution or even know how to unpwn this thing so I can get service again?
Aaron88
· 1 year ago
like i said!! i will pay!! just to get my phone to work! :( please help!! alexanderfost@Gmail.com
marquitos
· 1 year ago
HOLA A TODOS un dia despues de ser lanzado el iphone osea el sabado tube la oportunidad de ir a un cac de telcel junto con uno de mis cuates fue tanta la emocion que senti, que de repente al entrar me dijo mi cuate ese es el famoso iphone sin contestarle corri a tocarlo huauuuuuu fue una experiencia inolvidable ver el gadget mas deceado del mundo senti una emocion enorme, y probar todas y cada una de sus funciones y confieso q despues de un buen rato de estar con el iphone, tube que dejarlo y me dio tristeza no por dejarlo si no por que se que que no tengo dinero para uno, confiezo que no importa su precio pero para una persona como yo de poco efectivo pues se pone melancolico y triste y no me queda mas que verlo y verlo y pues ni modo se que hay mucha gente en contra y muchicima mas a favor del iphone a toda esa gente que no se logra convencer del iphone solo les digo que el iphone mas que un movil es moda, alegria, emocion, pensaran que estoy loco pero es lo que a mi me hace sentir, talvez le hagan falta detalle pero pues no deja de ser iphone y deceado por todos asi que no le busquen mas errores por que aunque tubiera muchos no deja der el iphone y punto. PD. steve mandame un iphone por favor Steve send me an iphone please marcos_mgd@hotmail.com +52 (2361028872)
reciban un saludo de iMarcos gaspar desde San Jose Miahuatlan, Puebla Mexico
Sri
· 1 year ago
amazing u dev team tigers... a hearty congrats to all of u from India. ..
the software is working absolutely fine. just a few minor hold backs causing delay to finally unlock my iPhone.. took an hour or so to finally set my phone free.. but i never got worried when my phone dint unlock the first or the second time.. had full faith in them... u rock.. keep it up..
rodrigo2803
· 1 year ago
Hi. I can't jailbreak my Iphone 3G. When the .ipsw file is creted and I try to restore my phone with it iTunes comes out with error 6. Cannot restore your Iphone. Can anybody tell my why is this happening? What about the post in update 3, creating a directory, how do I do that? Is it on the computer or the iPhone. I'm not a MAC user so any help will be thanked. Rodrigo
ROB
· 1 year ago
No matter what I try I end up with Error 6. What am I doing wrong with the 1st generation iPhone that now has left me without a phone. I literally have ran through the steps at least 25 times and always get error 6 while using the custom. If I use 2.0 that came from Apple it goes through without a hitch......HELP.
steelcut
· 1 year ago
Thanx al ot for bringing us this tool, works like a charm on 2G 1.1.4
YES !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This works...and works like a charm..... Please follow the instructions cimkeri has given like a bible....
Thanks Iphone-dev team.. you ROCK ! ! ! !
nidas
· 1 year ago
Thanks a bunch guys.. works like a charm.. Keep up the good work :)
crazyvocals22
· 1 year ago
Ok is anybody having this problem......I did the jailbreak.....it took me a second to get it but I finally got it to work......but now im having trouble adding anything to my phone.......I dont understand any of the applications the jailbreaks offer Can anyone help i just want to customize my theme and add a different snes emulator. But i cant figure it out.
juzz
· 1 year ago
WINDOWS VERSION! WINDOWS VERSION! WINDOWS VERSION!
This guy posted it over at the whirlpool forums a few hours ago and everyone that has tried it so far has had success, including myself. Read everyone else's posts saying it worked for them if you don't believe me. Have fun guys.
WINDOWS VISTA WINDOWS XP w00t
Midnightmoon
· 1 year ago
It worked for me too, 2.0 is just perfect! Realy have fun guys!=D
trey
· 1 year ago
Confimed, worked 100% on my iphone 3G
Alex
· 1 year ago
Hey guys, After following all the instructions and going through the whole process, my phone stuck at pine-apple logo and restarting itself non-stop. WHAT TO DO?
Thank you dev team! The PwnageTool worked like a charm! I appreciate your hard work so much. Kudos!
Setting APN
· 1 year ago
To add menu with EDGE settings (Cellular Data Network) you need to edit /System/Library/Carrier Bundles/your_carrier.bundle/carrier.plist.
ADD Boolean key AllowEDGEEditing and set it to Yes
raven
· 1 year ago
Thank you guys, you really did a great job. I hope that unlock will be available for iPhone 3G soon...
fed
· 1 year ago
******IF PWNAGE TOOL JUST BOUNCES ON YOUR DOCK AND DOESN’T OPEN ******
Hey guys, I’ve been trying to make Pwnage Tool open on my Mac since yesterday but it wasn’t working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor 2. In Activity Monitor, from the top Drop Down choose “All Processes” 3. Double Click on Pwnage Tool 2.0 4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called “ps” 5. Highlight “ps” and at the top of the Activity Monitor click “Quit Process” 6. It will ask you if you are sure, Click “Okay” 7. At this point, (once the “ps” Process has quit) the bouncing Pwnage Tool will settle and OPEN!
scot909
· 1 year ago
How did u work that out mate!!!!
Dipan
· 1 year ago
I upgraded my 1.1.4 ziphoned (unlocked, jailbroken) to iPhone2.0 using pwnage 2.0/ Went through perfectly fine - but Cydia crashes consistently. What can be the reason for this?
scot909
· 1 year ago
Cydia is currently very buggy in 2.0
chewy6382
· 1 year ago
when will installer be availbe?
Connor Brown
· 1 year ago
i really need to know how to jailbreak my iphone 3G! someone please help!!
There you go mate, choose whichever one you like best, enjoy.
juzz
· 1 year ago
Thank you iPhone Dev Team, you guys pwn!
I keep turning my iPhone on and off just to see the pineapple logo lol!
Now we wait impatiently for apps...
Neo
· 1 year ago
You guys are the best.. Many many thanks and congrats on a job well done. Unlocked and jailbroken my iphone 2.0 here in INDIA - mail and evrything else working just fine..
scot909
· 1 year ago
INDIA ??
jlove
· 1 year ago
Does this work with windows . If it does , please somebody could explain the steps please. Thank you .
Just jailbroke my already officially 2.0 updated iPhone 2G and only wanted a jailbreak (no unlock). Easy as can be! Great work guys!!! Thank you!!! Here are the files others may need and some quick instructions for someone just wanting to jailbreak. So easy you really don't need instructions, maybe just some clarity for some since people seem more focused on unlocking... http://www.darkartistry.com/content/view/158/35/
Francis
· 1 year ago
Thank You very kindly!
DM
· 1 year ago
Hi all,
I keep getting the "1600" error. I have tried creating the "device support" folder in iTunes, and it has no effect on the outcome. I have also tried deleting this folder, and re-creating it, and the result is the same. If any of you have experienced this same problem, and discovered a fix, I would appreciate it if you could enlighten me on your findings. Thank you very much.
JB510
· 1 year ago
Thanks!
diglapilesar
· 1 year ago
Thank you! Danke schön! Merci! Gracie!
syo
· 1 year ago
Awesome ... when do you guys plan to have the windows version out ? many thanks.
BuTtaMan
· 1 year ago
I unlocked my phone and everything yesterday with the new software. Everything was working fine but Now today I have no Edge service after using my Wifi tell me what's wrong I don't understand. Edge was working yesterday but not today. maybe I have bad service but I will check it out when I leave my office but I doubt it's the service
jcnancy
· 1 year ago
Thank you very much, today my iphone is working again, thanksssssssssssssss Iphone dev.org
johnnybeefcakes
· 1 year ago
Worked like a charm! I owe you guys a beer.
esafdsfds
· 1 year ago
pleeeeeeeeeeeeeeeze someone upload it
vampyren
· 1 year ago
“Failed to enter DFU mode”: ======================= Fire up Terminal on your Mac and fire of these two commands: cd ~/Library/iTunes mkdir “Device Support”
This was making me crazy and the above solved my problem. Took me a few hours search to find this so hopefully someone will have use for it.
And thanks a bunch again dev team.
jcnancy
· 1 year ago
Thank you very much, today my iphone is working again, thanksssssssssssssss iphone-dev.org, I love you
TimmyX
· 1 year ago
thanks for your work...
but i kind of got into a lot of problems..
i tried to use pwnage 2.0 on my unlocked 1.1.3 iphone
i entered dfu manually but i kept getting 1600 errors
after a 1601 error in itunes, itunes doesnt find my iphone anymore..
any idea how i could solve this issue?
thanks!
CZ
· 1 year ago
Can I downgrade with PWN2 from unblocked and powned firmware 2.0 to firmware 1.1.4??
David
· 1 year ago
activation failed in expert mode.
So, this is my first iphone, iphone 3G. I jailbroke my phone using the simple method and everything worked great. I then started installing some of the Featured Packages and I quickly ran out of disk on my root file system.
I then did the expert mode and increased my root partition to 1029MB added all the applications that installed via simple mode, restored with the custom ipsw, setup as new iphone and now it has not activated. call failed. i might also mention that I had the activate phone option checked. i am on a legit iphone contract.
Midnightmoon
· 1 year ago
Thank you!;)
mairi
· 1 year ago
Thanks Guys, Got it set up in one go on a PC. Its brilliant!! especially like the remote app - can control itunes from my phone, ammaazzing! its been wait but my god its worth it. thank you thank you thank you.
yourmon1232
· 1 year ago
hey dev team does this work on windows??
tomcairns1
· 1 year ago
okay i dont wanna sound rude/dissapointed but is there anything decent on cydia? seems abit.... iffy nothin realli there like games and stuff???
Cuervz
· 1 year ago
Hey ! .. again thnk you ! .. but im having some troubles with my phone calls i cant seem to hear anything and sometimes to even make a phone call .. its sends SMS alright so i dont think is a carrier issue so .. anyone else having the same ? thnks !
rdude
· 1 year ago
Thanks dev team for you excellent work! This tool works great no problems!!
Felix Redmann
· 1 year ago
At my Jailbreak is no Installer!! How i can put it onto my ipod touch???
Please Help
Paul
· 1 year ago
I currently use 1.1.4 with Booloader Version 3.9 (Ziphone) and everything works very well. So my question now is, wether I should use the option to update my bootloader to 3.9 (the Pwnage-one, because as I recall there was problem with Ziphone’s Bootloader 3.9) or to 4.6 and my second question would be, if I should use ‘Enable baseband update’ in the general-tab of Pwnage (what does this do/mean by the way?)
rje
· 1 year ago
It finally worked, but I've lost my cell network.
c4soul
· 1 year ago
thanx for all!
krimm
· 1 year ago
tnx so much :-D
Andy
· 1 year ago
What happened to support for Installer.app?
vampyren
· 1 year ago
That is what i wonder as well. Not sure if he purpose for removing it is that the apps from installer are old and mostly dont work on 2.0 or something else?
Did someone create a custom made app menu (i mean using expert mode and choosing your own appz)? Perhaps the installer is an extra option?
AR466
· 1 year ago
DOES ANYONE KNOW IF THERE IS GOING TO BE A VERSION FOR WINDOWS??
bigcomfy
· 1 year ago
My update from a crashy iLiberty+ 1.1.4 to pwnage 2.0 worked very nicely on my 2.5G iPhone. However, there is one problem: Wireless has a bit of a failure. What happens is, it will associate to my Basestation for a maximum of say three minutes (not everytime). The network list often does not display a bunch of wireless networks that should be present. It seems as if when it does connect it gets a few kb of data in and then shuts off. Using Settings -> General -> Reset - Reset Network Settings will sometimes restore this for a moment on the next restart (but dies off quickly). I have mine using BL4.6 Neutered, FB off and Unlocked. Should I move it down to 3.9?
KE
· 1 year ago
Thanks!! Works like a charm (even though I had to wrestle with it for awhile). Now to wait for more themes. : )
TheMan
· 1 year ago
Dear Dev Team: Thank you so much for your work. It is much appreciated. You guys rock! Dennis
bigcomfy
· 1 year ago
My update from a crashy iLiberty+ 1.1.4 to pwnage 2.0 worked very nicely on my 2.5G iPhone. However, there is one problem: Wireless has a bit of a failure. What happens is, it will associate to my Basestation for a maximum of say three minutes (not everytime). The network list often does not display a bunch of wireless networks that should be present. It seems as if when it does connect it gets a few kb of data in and then shuts off. Using Settings -> General -> Reset - Reset Network Settings will sometimes restore this for a moment on the next restart (but dies off quickly). I have mine using BL4.6 Neutered, FB off and Unlocked. Should I move it down to 3.9?
tuhin192
· 1 year ago
You guys deserve much more than thank you. But its all I offer now. Your method is working like a charm.
THANK YOU
Delafuente
· 1 year ago
hello!first thank the dev team for the great job,thx. maybe have somebody the same "small" problem. i am windows user, and i followed this guide http://www.modmyifone.com/forums/pwnage/244641-.... my old iphone was unlocked with ziphone my firmware was 1.1.3. i followed the guide above and all worked fine. the only problem is i have now in the upper right corner of my iphone a white strip specially visible on a black background.its not a big problem i know but it bothers me. if i restore again the cosmos firmware could it maybe solve this problem or i am just unlucky? thank you in andvance and sorry for my poor english .
Delafuente
· 1 year ago
small correction not on the right corner, on the upper left corner of the display.thx
asher
· 1 year ago
hi, the app dont run in my mac, im tried on another mac and dont run to, heelp please :(
Alexis
· 1 year ago
Thanks a lot! Great work guys
stockli
· 1 year ago
Works awesome! Thanks so much, dev team! You guys rule!
iphone proud
· 1 year ago
Hello there,
BIG Greeting from Saudi Arabia, fab work dev team, you have always been the best. I have Power Book G4 running tiger, I have the same problem as others, the program bounce but never launch. I have tried rebooting many times, downloaded the tool from other sites but remain the same, i really want to upgrade to 2.0 any help :'((((. CHEEEEEEEEEEEERS.
Shep
· 1 year ago
Apps from app store not working, gonna try a setting and content restore :/
Matze
· 1 year ago
Nice Work! Thank You!!!!
lukeb
· 1 year ago
Thank you. Good work.
WAM087
· 1 year ago
TMobile Edge/ and or TZones fix is on Cydia, just go to The Search option in Cydia, type in TZones, and you should be good to go, works fine.
I managed to get mine working beautifully with the Pwnagetool 2.0, however it seems as if I cannot sync my music (file is missing), calendar, contacts and pictures are all ok. Any idea??
P
Phil
· 1 year ago
THANK YOU GUYS! PERFECT....
Chris
· 1 year ago
Thanks you guys so much!
Alonso
· 1 year ago
It works great.. i had problems with the DFU but the only thing i needed to do is to create the "Device Support" directory.. Thank You Very Much Dev Team... Muchas Gracias!!!
bigcomfy
· 1 year ago
Wireless not working after good pwnage to 2.5 iPhone. Wireless was ok in 1.1.4 with iLiberty+. What happens nows is the network list will not display all networks (or once in ten times it does). Does not join network manually (network is fine, other devices are on it but I went through it with a comb anyways, nothing wrong on the router side). If using Settings - General - Reset - Reset Network sometimes that will work on the next boot for all of like two minutes but not much more than that. Started with BL4.6 Neutered, Unlocked, re-flashed to 3.9 Neutered Unlocked. No change. :-\
rje
· 1 year ago
Jailbreaking takes out my wireless network. If I restore, the network returns. If I jailbreak again, I lose it.
Shawty1
· 1 year ago
Thank you so much. I'm soooooo haaapppyyy. I have my iphone back. Yippeeee...... Real talk though, you guys did a good job. Nuff props to you.
carlos Arredondo
· 1 year ago
ustedes son los mejores gracias!!!! :)
Kenny
· 1 year ago
Awesome work! Upgraded from 1.1.4 without any problems.
scott
· 1 year ago
THANK YOU ! THANK YOU! THANK YOU!
Scott Xavier
· 1 year ago
My mail was the only thing down... I hope it reinstalls all my apps, Im an app nazi now...
mark
· 1 year ago
First of all, thanks Dev Team for the amazing work you do. We love you!
But, I must confess a little frustration. The Dev Team has not provided a guide of any sort. So everyone else is scrabbling about on the forums trying to make something. But each misses bits out and you have to spend hours pouring through everything to work it out! For instance, is it ok to upgrade if your on 1.1.3, or must you go to 1.1.4 first? Will I be able to resync my Notes and Camera Roll, or will be they lost forever after 2.0?
Basic stuff I know, but important to most of us, who might not have an automatic indepth understanding of the new software.
Dev Team: Some basic instructions please!!!
Thanks again for what you do. You amaze the world...literally!
Mark
jforbes
· 1 year ago
I did something I haven't seen here yet. I went through the process following bits of advice that were scattered through the comments here. Put the 1G iPhone into DFU mode and tried to restore. But I hit control-restore instead of option-restore and had to wait while iTunes reset the phone to factory settings. But at the end iTunes and the phone told me to insert a valid SIM in order to activate. The phone had been upgraded to 2.0 by the previous owner and the ATT SIM removed before giving it to me, so it had no card in it. My only card is a T-Mobile card, which won't work of course, but I haven't been able to get past the DFU error. When I try to restore from the custom ipsw I get Error (6). At the very least I would like to get the phone back to functional iPod mode but right now it's sort of stuck in Limbo.
terry
· 1 year ago
OMG OMG OMG!!!!!! DEV TEAM!!!!! YOU ARE MARVALUS PEOPLE!!!!!!! THANK GOD FOR YOU GUYS! AND GYALS!
OMG THANK YOU DEV TEAM FROM THE BOTTOM OF MY HEART!
TERRY!!!!!!
rje
· 1 year ago
I can't use it. It's unfortunate. Any jailbreak takes out my wireless network. I'm restoring and will go without the current jailbreak. There will be others.
Oscar
· 1 year ago
For all you people who get a locked phone, because of wrong sim/carrier, follow these steps exactly, and it will work
ALL you people frickin' ROCKS!!! Thx from a Swede with an unofficial carrier ;)
First, thanks to everyone who worked on Pwnage 2.0! It's simply awesome.
After pwning my 1st gen iPhone and getting up and running on Firmware2.0 Mail wouldn't launch properly.
I fixed this issue by installing OpenSSH from Cydia, then ssh'ing into the iPhone, logged in as root / alpine and running the following to fix it:
chmod 777 /var/mobile/Library/Mail chown mobile /var/mobile/Library/Cookies/ chown mobile/var/mobile/Library/Cookies/Cookies.plist
All is working perfectly now.
Julrom1
· 1 year ago
Thank for your work! It's work perfectly on my iphone V1. Thank a lot from France!
marcviln
· 1 year ago
Thanks, iPhone Dev Team! It worked the first time. Well worth the wait. Pat yourselves on the back for all of us. You guys really do rock.
hookid
· 1 year ago
STILL HAVING ERROR 1600:
I followed update 3 (the folder is there but empty), everything in pwnage works perfectly it says i was in DFU mode, i proceed to go into itunes and it still gives me the 1600 error. I have an iPhone 3G
clouddmc
· 1 year ago
Thank you dev team,the tool worth the heated expectation and waiting .
thx !
sebastianz
· 1 year ago
Hi. Just updated my iPhone to 2.0 However, I can't setup my EDGE and can't find it under 'Network'. Please assist asap. Thanks.
okto
· 1 year ago
Thank you!
di5tance
· 1 year ago
thanks again and in amazing time, only complaint is no installer, cydia i seem to have less luck with, but the fact u came so far so fast BRAVO!!!
Phillip Billups
· 1 year ago
Works Like a charm : ) Great job Dev Team!!!!!
Martin
· 1 year ago
So for some reason my iTunes backup of my iPhone was said to be "corrupted" and after jailbreaking my 3g, I cannot figure out how to get back on the network.
Greg
· 1 year ago
Thank you from Greece, I had a little trouble with the "real" DFU but I got it working and now I have a 1st Gen iPhone 8GB bought from the US originally with 1.0.1, upgraded and unlocked with ziphone (firmware 1.1.4) and now with the freshest release of firmware 2 operating on the WIND network fully unlocked, jailbroken and I am free to do whatever I want!!
THANK YOU!!!!!!
Tio
· 1 year ago
YOU GUY ROCK!!!! :)))) All works fine!!! Respect!!!!
I FOUND A BUG! WHEN INSTALL CYDIA ON 3G PHONE IT CANT BOOT PROPERLY!!! NEED HELP!
riten ghai
· 1 year ago
CAN I PLEASE GET HELP WITH ITUNES ERROR 6,TRIED EVERYTHING,REINSTALL,RE BOOT,ALL OF IT BUT HAVE HAD NO LUCK AT ALL.
makavelidon04
· 1 year ago
Question?Will this be made for Windows? Thank you for this app:)
Mundo
· 1 year ago
Hey guys, how do you change the boot screen image? A guide or how-to, or a point in the right direction would be great. Thanks in advance!
Denisboy
· 1 year ago
Thank you so much for the Pwnage Tool!!! It works great! Can't wait to explore the appstore since I've finished scavenging Cydia. 2 Things to look out for all is that Installer is not yet compatible but Cydia rocks socks and that iPod Touch owners turn your iPod Touch off during DFU since otherwise you'll get a petty error...that's all. I love my 2.0 iTouch!!
You guys are genius
Mejia3
· 1 year ago
Some plz help yesterday i run the whole setup thing and my iphone 3G worked fine (everything except makin calls and stuff i have tmobile) but today i tried to put it in DFU mode watever the hell that is, and it just keeps telling me that there's no SIM. I ran the program again and nothing. I know i should have left it alone but I dunno wat I did...HELP
pennyboy
· 1 year ago
if i jailbreak my 1st gen phone on a mac can i still use on my windows at home or will there be a confict between them.
willyboy
· 1 year ago
My mail was broken also.. I just ssh the thing and removed the mail folder, restarted and entered a new mail account and all is well..
All Comments
I thought it will be good to write a brief explanation for the people who use the PwnageTool for the first time like me :) Yes I did it and unlock works for me. I also checked the exchange support, youtube, appstore... All works fine.
I had a 2g iphone 1.1.4 that has been unlocked by ziphone software. I did it once and I used it till now without a problem. I was a little bit afraid to try pwnagetool 2.0 because of what zibri may have done to my iphone, but it worked great and it will work for you.
Here are the steps I took;
1. I upgraded to Itunes 7.7
2. Connected my iphone. It deteced the iphone and asked for an upgrade, I just cliked download only. This is how I got the original firmware form apple :)Then disconnected iphone just after the download started.
3. Before opening the pwnagetool I put my iphone in dfu mode. I tried at least 4 times to do that. The trick was to hold down the power and home botton wait until it restarts. Then pluck it into the dock wait for ten seconds during the apple logo and then release it . It is totally black but itunes recognized it as in recovery. This is the dfu we need.
4. I did not choose the expert mode. Chosed iphone 1g . It had found the restore firmware that itunes had already downloaded. Asked me for the bootloaders. I browsed both of them respectively and then it created the custom ipws.
5.Clicked next and it recognized the dfu but asked for shutdown. I had problem here before, It said that it can not put the device in dfu mode. This time it detected and asked for a shutdown. I just pressed both power and home button until it restarted. Then watch for the screen. It tells you when to release the power button and when to release home button. Then it was ok. My iphone was ready to be restored with the custom ipws. The tool gave a message everything ok and i must just close pwnagetool and use itunes.
6. I didn't do anything to iphone just left it where it was in dfu mode. Itunes had already gave the message that it needs to restore my iphone. I just said ok. The restore screen was in front of me. Just pressed alt button on the keyboard and while pressing it i clicked restore, and I showed itunes gently my custom ipws. It restored it successfully.
7. After that the phone rebooted, bootneutral was opened automatically , first it neutral the boot and then flashed the baseband. All was automatic. Then after the last reboot, there it was jailbroken and unlocked with all features working.
I hope you guys get lucky as I did.
Thanks again to the dev team.
http://rapidshare.com/files/131008012/boot_load...
pwnage tool 2.0
http://rapidshare.com/files/131007777/PwnageToo...
http://rapidshare.com/files/131008012/boot_load...
pwnage tool 2.0
http://rapidshare.com/files/131007777/PwnageToo...
http://www.demonoid.com/files/details/1558009/
PwnageTool 2.0 with Firmware 2.0 and bootloaders (3G iPHONE)
http://www.demonoid.com/files/details/1558399/
iPod / 1st Gen iPhone Firmware 2.0 Pwnage for Windows
http://www.demonoid.com/files/details/1558434/
3G iPhone Firmware 2.0 Pwnage for Windows
http://www.demonoid.com/files/details/1558435/
Guys, I'd like to help you translating PwnageTool in French,
could you please give me an email adresse on my Disqus profile ?
(There is a link to my Facebook profile on Disqus)
I don't want to post my email adress here.
Does "3G iPhone Firmware 2.0 Pwnage for Windows" really work on windows?
I haven't tested yet but seeing the tuto I think it works, that's why I spent time bringing the files on Demonoid and creating IPSW for win users.
There haven't any other links.
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
:) Awesome boot logo for you nice mac users:
http://img155.imageshack.us/img155/3749/bootlog...
The whole thing was worthing the wait, disgrace.
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
i was bored a few minutes ago ;)
**BLINK 182** for the Still Fansssss
http://i29.photobucket.com/albums/c272/sendblin...
can you please tell me how to create a boot image on Photoshop CS2??
I am trying but i can't. or please direct me to some place where they have instruction for that.
thank you
Then click save and you're done (make sure to backup the original logo or save as another name )
Thank you guys
I was able to load my .PNG created on CS2 into the new .iswp. But with a work around. It was initially rejected by pwnage tool when I browsed and selected it (i am guessing because of different color profile). then i selected the one that created in CS and it accepted it. Then i went to the folder where i saved my custom boot image (made in CS) and moved that .png file and replaced it with the new .png file (made is CS2, the one pwnage was rejecting) and renamed with the same file name as the .png created in CS. then returned to Pwnage tool and created the custom .iswp. then when i restored it to my iPhone voila my newly created boot .png (the CS2 created one) image was on the screen. I don't why or how it worked, but i can say is that it did. so thought i would share for people if they are having similar problems like me.
I would still like to learn how to create it on Photoshop without pwnage rejecting it.
thank you guys
P.s. Thank you Dev-Team you guys are very generous for providing us with this fantastic tool at free of charge. Very very grateful. And wonderful work!!!
A++++++++++
20 Clout Points to you good sir.
http://rapidshare.com/files/131008012/boot_load...
pwnage tool 2.0
http://rapidshare.com/files/131007777/PwnageToo...
I have tried everything. people are having the same problem and posting but generally getting ignored.
any ideas?
there both runnig leopard and still the same thingss
has anyone got any ideas??
Suffice to say though by going into Activity Monitor & choosing 'All processes' I saw the process called 'ps', I force quit and the Pwnage tool just started.
Itd be good for more people who try this method , and who are braver, to try to see if it gets the app working on their Macs and try to upgrade their phone, as I say if they're feeling brave.
I know that seems cowardly but Id prefer to wait and see
First book did everything and still doesn't work.
I did the pwnage and the phone is now pwned 2.0 and works fine. couple of weird errors with some apps from the app store but otherwise works perfectly.
thanks pwnage folk
My Machine is Leopard, PowerBook G4, I have run that program that strips out Intel and foreign language libraries, and besides that I'm basically running 'stock'
Well I got it to launch, I haven't tried to update yet, but I thought I'd post here anyway.
This could be caused by lots of different things, so if it doesn't work for you sorry Charlie, but what I did was updated iTunes to the latest version (I had not updated yet). Still wouldn't work so I did a crazy thing, I rebooted. Now it launches. I don't know if it was the iTunes update, the reboot, or a combination of both, but after I did both it launches.
However, I found these iTunes errors in the log: "Could not perform SSL Handshake" and "Could not enable SSL". I think they are related because they happen every time I start PwnageTool.
Maybe this is of some help to the devvers? PS Thanks for releasing the app!!!
Nothing in console log for me.
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem.
please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
http://www.iphonealley.com/forums/showthread.ph...
To fix the bouncing app issue:
- Launch Pwnage Tool 2.0
- Open "Activity Monitor" (in utilities folder)
- Find the process "ps" (make sure you look under "all processes")
- KILL IT!
Pwnage Tool will now open!
Thanks to flag420 for discovering this.
Maybe update the post with these steps?
1. open pwnage tool
2. open activity monitor (applications/Utilities/activity monitor)
3. in activity monitor scroll down the list until you find "ps"
4. highlight ps and click quit process in the upper left hand corner and click force quit.
5 change to pwnage tool again, it should work.
this worked for me but i take no liblitey if your computer is messed up afterward.
I did not discover this!
Thanks iphone dev team!
Running 10.4.11
iTunes7.7
Great work Dev Team.
just hold down the buttons till they do
i can get everything to work up until the very last part. it asks if my iphone has been pwnd before, i say no, it says dfu mode failed to recognize.
When the usb and iTunes logo is on the screen and i press both home and sleep/wake, i get nothing.
help please ...
he answers quick and directly
are you fido or rogers?
let me know if you had the same issue and how did you rresolve it!
Thanks
After the process I configured as a new iPhone.
http://sleepers.net/news/2008/07/20/pwnage-opti...
do you have any other link to download this frimware?
I used the Pwnage tool to create the custom ISPW, restored my phone first in recovery mode (my fatl mistake?), the in proper DFU mode. iTunes now gives me this error, and I can only make emergency calls.
--------------
The iPhone "iPhone" cannot be used with iTunes because the information required for activation could not be obtained from the iPhone.
Check that the sim card is inserted in your iPhone and that it is not PIN-locked.
-------------
Help please!
HOLD DOWN BOTH POWER AND HOME TILL SCREEN GOES BLACK
LET GO OF POWER BUTTON LEAVE HOME BUTTON PRESSED TILL ITUNES RECOGNIZES IT...
If Itunes doesn't recognize it after 20 seconds REPEAT process... timing is VERY important and it takes everyone a few tries to get it... your phone is fine! relax...
Answering that you are not a legit user will create a firmware that will unlock the phone on first run using 'Bootneuter'.
Honestly I respect the impressive skillz that went into this app, and I think geeks should have their chance to have fun and include jokes, but this app has a pretty low usability factor.
have tried this on 3 intel macs all with the same results...
Remember, its tricky but keep trying. It took me 2 or 3 times to get it but thats how you get it in the correct DFU mode.
Then, when you succeeded, go to itunes and OK in the box that tells you "your iphone is in restore mode and needs restoring"
Then press OPTION key (ALT) and click RESTORE at the same time. you will see a drop down menu--click the ipsw in the applications folder and click open. That will work.
I will answer more questions if you reply...Thanks from Seattle
and does this work with the 3G?
tool. After it asks if you have ev.r PWND your phone before. If your
not sure, click no and then plug in your phone. I dont know if it
works with the 3g. I have a 2g and it works well for me.
I had 2 iphones - mine was running 1.1.4 hacked in Australia and this tool worked no problems.
HOWEVER - the point of this post is that I also had a friends iphone who had upgraded to 2.0 by mistake and pwned ALSO WORKED.
The steps to take for hacking an already upgraded 2.0 are (do NOT have your iphone plugged in)
1. Open up the pwned 2.0
2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work
3. Select the 2.0 firmware and also select relevant *.bins
4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6"
5. Go back to main menu and enter General Settings --> select Enable Baseband Update
6. Then build the firmware and save it to your desktop
7. Once the firmware is built, pwned will ask you to plug in your iphone via USB.
8. It will then step you through the process of enter DFU mode
9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded)
10. Hold down ALT (on MAC) and select the firmware on your desktop
11. iPhone will update - LEAVE IT for the entire process.
12. It should install and all will work :)
Cheers
I actually REINSTALLED Firmware 2.0 on this phone as my mate had tried to downgrade. This meant it was a FRESH copy of 2.0. I then started at Step 1 above.
Thank you very much for your instructions. I followed your steps to the letter and now my "baby" is born again!
Thanks for Help
If it doesn't ask you for the bins - just try it anyway as you have already upgraded to a higher baseband anyway as your at 2.0.
Let us know if works :)
Fred
Look at the very top of this page. You should find lots of links to all the files you need.
Frederick
I have the 3G. There is the error 6.
Any idea what i have to do?
Doesn't really matter if the pwned APP can't put you into DFU mode. You can do it yourself.
1. Turn off the phone & plug into USB (connected obviously :P)
2. Hold the power and home buttons at the same time for 10 secs
3. Release power button and continue holding home button
4. iTunes will recognize the phone
5. Hit "Option/ALT" key and click restore.
6. Select the firmware on your desktop
7. Await 2.0 love (feel free to drink a beer at this point)
Frederick
If nothing works - reinstall an "official" version of firmware 2.0 and start again at the beginning making sure everything is correctly set up.( i.e. device support folder etc etc and follow steps at the top)
Its really "impossible" to brick your iphone (famous last words! :D)
This is the password thats required to make the apps work.
F.
2008-07-20 09:36:17 - Successfully built custom .ipsw file at '/Users/dannynguyen/Desktop/iPhone1,1_2.0_5A347_Custom_Restore.ipsw'.
2008-07-20 09:36:25 - Failed to prepare x12220000_4_Recovery.ipsw file."
idont know what that means, if you can help me that would be awesome!
1. Open Finder
2. Goto "Mac HD"
3. Goto "Library" and then to "Itunes"
4. If "Device Support" EXISTS - open folder and delete everything in there.
5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
:) It will solve the "Failed to prepare x12220000_4_Recovery.ipsw file."
Frederick
BTW - yes you can upload the backup. Backups don't affect the firmware - its just sms, phone nos etc (and I think it says this when you load it in itunes. i.e. something like "backup old file? this wont affect firmware"
Cheers & Goodluck with 2.0!
Frederick
Follow and check all steps and all will work.
=== Pre-upgrade Checks ===
1. Restore your iPhone with the Original & Official Apple iphone 2.0 software.
2. Phone will be "emergency" only status.
=== Device Support Folder ===
1. Open Finder
2. Goto "Mac HD"
3. Goto "Library" and then to "Itunes"
4. If "Device Support" EXISTS - open folder and delete everything in there.
5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
=== Download Bootloaders ===
1. You need both 3.9 and 4.6 (available via 100s of links on this page - particularly at the top)
=== Upgrade Steps ===
1. Open up the pwned 2.0
2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work
3. Select the 2.0 firmware and also select relevant *.bins
4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6"
5. Go back to main menu and enter General Settings --> select Enable Baseband Update
6. Then build the firmware and save it to your desktop
7. Once the firmware is built, pwned will ask you to plug in your iphone via USB.
8. It will then step you through the process of enter DFU mode
9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded)
10. Hold down ALT (on MAC) and select the firmware on your desktop
11. iPhone will update - LEAVE IT for the entire process.
12. It should install and all will work :)
=== If DFU Fails ===
1. Plug iPhone into USB & then TURN OFF (connected obviously :P)
2. Hold the power and home buttons at the same time for 10 secs
3. Release power button and continue holding home button
4. iTunes will recognize the phone in "Restore Mode"
5. Hit "Option/ALT" key and click restore.
6. Select the firmware on your desktop
7. Await 2.0 love (feel free to drink a beer at this point)
Hope this is all clear enough for everyone :)
Frederick!
1. Open Finder
2. Goto "Home" (command-shift-h)
3. Goto "Library" and then to "iTunes"
4. If "Device Support" EXISTS - open folder and delete everything in there.
5. If "Device Support" folder doesn't exist - create a new folder called "Device Support"
Very subtle difference; the folder needs to be in your home directory's Library (too?)
I've tried a lot of things before, none worked.
I followed your instruction and it worked !!!
cimekri, I couldn't figure out how to use the tool and your description helped me greatly. Thanks for sharing your experience.
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem.
please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
http://www.iphonealley.com/forums/showthread.ph...
I see a lot of you are fretting over these phones like you've destroyed them... even the most ignorant moron can't "brick" an iphone anymore... everything is reversible save dropping it in the toilet... even that's reversible if you get a drunk enough genius.
Thanks EVERYONE !!!
wasted at least an hour on that
kudos to the dev-team you've made a lot of people very happy here. Thanks for making it so easy for us.
now go and celebrate and give those sleep-depraved eyes som rest now :)
Can't wait to try mobileme push support now.
grtz from Belgium
The simple mode didn't work for me though, I had to use the expert mode to get rid of the 1600 and 1601 errors (both happened to me in two different runs).
Big Up devteam!
Such a shame that the various people who worked on unlocks etc couldn't stick together for the common good. I hope Zibri manages to create a new version of ZiPhone that works in the same way as the existing one does.
Thanks for all your work Dev Team.
My IMEI number blocked here in Turkey because i bought my phone from USA.
The new baseband is flashable i know it because it is already unclocked and Its a first gen iPhone (not a 3G).
All i wanna know is: Is there a tool out there to fake the imei number? (Like the feature in Stupid Ziphone)
Much thanks to the dev team! Without your efforts, the "full" iPhone experience is limited only to the Apple-carrier followers.
Kudos!
http://forums.whirlpool.net.au/forum-replies.cf...
100% working and tested!
those instructions really helped me; happy 2.0 user now :)
WELL DONE DEV TEAM! THANKYOU! :-D
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
CAN'T WAIT FOR THE 2.0 APPS TO START ROLLING OUT....
OH HOW I WISH THERE WAS AN UNLOCK FOR 3G....
Hey guys, I’ve been trying to make Pwnage Tool open on my Mac since yesterday but it wasn’t working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor
2. In Activity Monitor, from the top Drop Down choose “All Processes”
3. Double Click on Pwnage Tool 2.0
4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called “ps”
5. Highlight “ps” and at the top of the Activity Monitor click “Quit Process”
6. It will ask you if you are sure, Click “Okay”
7. At this point, (once the “ps” Process has quit) the bouncing Pwnage Tool will settle and OPEN!
I hope this helps! It worked on my computer as well as my friends’ and my boyfriends computers! Wish you luck, the Pwnage Tool is fucking awesome!
THANKS FOR THE TOOL DEV TEAM!!!!! Greetings from the Texas-Mexico Border! (Dev-Team consider posting this as “Update 7″ there are lots of people who are having trouble opening the Tool on their macs) GOOD LUCK!
Hi lucky dude i am unable to keep the phone in DFU mode and by mistake i have downloaded and installed the 2.0 version from the i tunes i have mac and downloaded and created a custom ipws but i dnt follow how to mount this new ipws to my iphone i am tensed can you mail me on vishrut.sanghvi@gmail.com or reply here .. please i beg of you and thanx in advance...
http://rapidshare.com/files/131192355/PwnageToo...
I have followed all the steps in creating the custom IPSW file using the Pwnage 2.0.1 software.
I then enter the DFU mode sucessfully using the tool, quit Pwnage and then restore the iPhone using the custom IPSW file. Once restored, itunes says that the restore was succesful. Later iphone is not recognized in iTunes and my phone is in its original state - locked and unactivated.
I dont understand where i went wrong.
Is there any technical reason why someone else with a 1st gen iPhone could not bypass all the creation hoopla and simply use the restore file I created?
:)
Also, thank you for managing to surprise just about everyone in the world with this one. After all the bitching and the moaning from everyone on this blog, I kind of thought you might finish it and say tough luck to everyone and not release it. Kudos for not only living up to your exceeding hyped promises, but by unexpectedly releasing it sooner than I think anyone thought. Please don't let this experience and the people here keep you from working hard in the future. I have a feeling we've only seen the beginning of what the Devteam can do with the iPhone and I look forward to supporting you with whatever you do.
link updated
http://rapidshare.com/files/131005962/boot_load...
...now us iPhone 3G advocates are patiently waiting.
i don't know much about hacking side....please explain me how to use this tool, unlocking and jailbreak 2.0. i'm using windows OS. please........... thanks in advance bala.
(don't know why, just had to say it)
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
http://rapidshare.com/files/131008012/boot_load...
and pwnage tool mirror
http://rapidshare.com/files/131007777/PwnageToo...
Please explain me how to unlock and jailbreak of 2.0 from my windows xp using this tool.
thanks
bala
It's ONLY for MAC OS X!!! HAHAHA LOL
Windoze $uck$... once again!!!
And...
Windows SUCKS!
PLEASE
THANK YOU
http://rapidshare.com/files/131005962/boot_load...
http://www.iphone-hacks.com/downloads/file/109
http://rapidshare.com/files/131005235/PwnageToo...
Hope this helps.
http://rapidshare.com/files/131010435/bootloade...
Also, THERE IS NO WINDOWS SUPPORT YET!
Also, I would be happy to mirror the app as well if needed.
But receive the alert in iTune 7.7
An update to the carrier settings for your iPhone is available. Would you like to install it now?
Answer yes but received the below. No harm made but some some inconvenience only. SIM card is not one that Apple expected
iTunes could not update the carier settings on your iPhone.
An unknown error occurred (0xE8000001).
Thanks dev-team!!!
http://support.apple.com/kb/HT1970?viewlocale=e...
Of course, I have no such directory /Users/[Username]/Library/iTunes/iPhone Carrier Support/ so I don't know where it's failing.
/System/Library/Carrier Bundles/Unknown.bundle/
All doubters should be ashamed of their behaviour over the last week!
One question though, when running this - I select iPhone and browse for the ipsw package, I have both iPhone1,1_2.0_5A345_Restore.ipsw & iPhone1,2_2.0_5A347_Restore.ipsw and the tool reports that they are both the wrong package. Running on PPC 10.5.4.
Thanks guys once again...
http://www.macrumors.com/2008/07/11/upgrading-f...
That error happens similarly when choosing the firmware 1.1.4 or more older version.
Of course, firmware 1.1.4 is Apple OFFICIAL fw.
oh god...
It looks like your 5A347 is the iphone 3G version.
2008-07-19 22:01:32 - Loaded .ipsw file from '/Users/apple/Desktop/iPhone1,2_2.0_5A347_Restore.ipsw'.
2008-07-19 22:01:50 - Can't recognize .ipsw file.
regards
http://www.macrumors.com/c.php?u=http%3A%2F%2Fa...
i know, long link...
Dev-Team... Thank you!
Desde Pucón, Chile
Give that a go, it worked for me. :)
Update 3: If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool.
i keep getting this in my log:
2008-07-19 19:39:34 - Failed to prepare x12220000_4_Recovery.ipsw file.
and i get a U FAIL , get a zune picture .... any idea on what to do?
Got the same problem with my old iPhone 2.5G
Thanks
PwnageTool 2.0 attempts to guide you into getting into DFU mode. The first step you have to do is "connect your device to the USB port". But if your iphone is already connected PwnageTool thinks something went wrong and gives you a "failed to enter DFU mode" error. So try running PwnageTool with an UNCONNECTED iPhone and it will work. But it doesn't really matter anyway. You can just put your iPhone into dfu mode, close pwnage tool and restore using the custom firmware - that's exactly what pwnageTool wants you to do.
Thank you, and thank you Dev Team
Error:
Failed to prepare x12220000_4_Recovery.ipsw file.
<img src="http://www.faithdrive.com/failed_dfu.jpg" />
Wicked stuff.
BTW - I'm not able to restore the custom image in iTunes - error (6)
My Library/iTunes/ folder didn't even have "Device Support" in there...
The program was for some reazon jumping the screen where it forced me to get in to DFU mode. i solved by restarting my MBP without the iPhone pluged.
ran the application and carefully clicked next each time.. making sure to avoid double clicks.
oh! and i also ran mkdir ~/Library/iTunes/Device\ Support
since i didnt had that folder
im not restoring using itunes.
:D
I had to do this a little round-about, but you get the idea.
When the DFU programing was ready the iPhone is now in a loop mode.
I see the pineapple for about 7 seconds and then the phone reboots, show the pineapple for 7 seconds and the is repeats it self.
I can't get it out of the loop, tried getting in to the DFU and Restore mode but it fails as the phone reboots all the time.
Acctually I did manage to go to the "Russian"? dude which I belive is a restore mode and tried to reflash the custom firmware but now I am stuck...
Really need ideeas as how to proceed.
D
I managed to get into DFU mode and did a recovery back to original Apple firmware.
I have gone all through the "instruction" sheet and no luck. I dont even get the red "Cant find bootloader" pages, it just go's right into "creatting..." for me. Thanks
I can help I was in that situation before... I had this problem
Your phone failed at the update... (you probably pwned your phone a couple times) All you need to do is get it to restore one more time, and pwnage will take care of the rest. If you can't get it to restore then you aren't putting it into DFU mode correctly, it takes a few tries for me and I've done this on 50 phones. But really! Don't fret, it's all reversable, don't pay someone 30 dollars... just be patient and it will all work out.
Try to restore it ONE MORE TIME... connect your phone to itunes... hold the power button and the home button until it turns BLACK then let go of the power button RIGHT AWAY (hint: if you let the pineapple pop up one more time you have to start all over) the screen should remain black connected to the computer and after about 15 seconds iTunes will recognize it as an iphone that needs to be restored... THEN RESTORE IT WITH OFFICIAL APPLE FIRMWARE and start all over again with the pwnage tool...
Any more questions:
http://coachhowland.blogspot.com/2008/07/pwnage...
I figured it all out!! Thank you so much--Steven
Derek.
I used the DFU
When the pineapple show, press and hold down both HOME and POWER ON/OFF button until the screen goes black, keep them pressed down for 2 more seconds and then release the POWER button only while holding down the HOME button for 10 more seconds.
iTunes will detect the phone i DFU mode and you have the option to restore to the original firmware og your choice.
went back to windows and restored my messed up iphone to 2.0 everything is locked.
I tried again for the second time, another pineapple loop.
Derek
Derek.
However I tried the following:
I downloaded a prebuild iPhone 3G ipsw file from piratebay and used the DFU to restore.
I DID NOT go into loop and booted up.
All is fine EXCEPT I get no carrier so it is like an iphone Touch :(
So I am not sure what the difference between my own build and the downloaded build is.
I am still trying to figure it out :)
Restored in normal restore mode (no need for DFU) et voila!
First DFU is not the itunes logo + usb. DFU mode shows nothing.
But iTunes will recognize it. I connected my iPod in DFU mode. I removed the steps listed in update 3. **Make sure you do it in your OWN USER directory, not only the system directory!!
Then it was smooth sailings, i didn't get the U FAIL image again. and instead got the step by step from Pwnagetool.
Thankyou dev team!
aim is sgtconfig if you have questions.
nothing is suppose to be on the screen, nor should it be powered on.
iTunes will recognize it in recovery mode.
to get to dfu. from your home screen. hold down power + home for 7-9 seconds. then let go of just the power and keep pressing home.
nothing should happen, besides iTunes popping up.
or you just go to Macintosh HD, Users, your usrname, Library, iTunes. and make dir.
Derek
Jonathan 'The' macgeek
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
Take iPhone1,1_2.0_5A347_Restore.ipsw
Thanks
Thank you so much :-)
http://rapidshare.com/files/130990503/boot_load...
http://rapidshare.com/files/130984115/PwnageToo...
Thank you Dev Team!
Thank you thank you Thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you.
Seat belts are tightened!!!
Yours Sincerly,
Silv0r <3
Love and Peace for all your members Dev Team, get some rest and enjoy your day.
all. I have the boot loader and the firmware . what do I do?
Faslane
Thanks alot!!
THX THX THXX
You guys are the best.
You are so cool, and have my total appreciation and respect.
Cheers
TUI
:-P
thanks Dev Team !
juli 20 here in Belgium
thank you from Israel
is this going to work on a pc?
cmw sucks balls.
I hope the Windows Version is out by Monday!
What about the 90% of computer users that use windows?
90% = Windows
6.3% = Mac
3.7% = Linux
Don't believe me?
http://www.w3schools.com/browsers/browsers_os.asp
The torrent that's up is the tool:
www.demonoid.com/files/details/1557885/3876110/
edit: http://www.demonoid.com/files/details/1557873/1...
I don't see any pwned ispw's yet.
edit: Here's one: http://www.demonoid.com/files/details/1558155/1...
Thank you guys :)
THANKS DEV-Team!!!
Thank you very much! Baie dankie! Ka pai!
THX GUYS!
Big Thanks from Quebec
Apptap, no luck in the build process:not available not supported.
Right now cydia is stuck, maybe the sources that I added are not compatable with cydia???
if you need more help email at chomby1991@gmail.com
also figured out that it works again if you su chown -R mobile:mobile /private/var/mobile
mmh server is busy.. why doesn't somebody (who downloaded the tool) share it in other mirrors?
Or somebody upload to Rapidshare or something ...
CAN SOMEONE UPLOAD IT TO ANOTHER SERVER PLEASE? This one seems full
Regards,
Matias
T H A N K Y O U ! ! !
What about the 90% of computer users that use windows?
90% = Windows
6.3% = Mac
3.7% = Linux
Don't believe me?
http://www.w3schools.com/browsers/browsers_os.asp
I'm pretty sure 100% of the computer-owning population world-wide is not trying to download this app.
Are you guys planning to unlock the 3G?
oops..... broken link?!?!?!?!?!?!
windows users must still waiting....
Ignore the selfish ones,we all thank you
Son of bitch
GRAZIE DEV TEAM!!!
Will post here shortly. Suggest everyone else that has downloaded jump on the same torrent to help seed.
dev tyeam u rock and i hope u appreciate my donation u rock !!!!!!!!!!! to the max what would i do without u
please
Anyone, I'll re upload as well after.
Do we have to wait for getting this till tomorrow??
Only the communication to "customers" needs improvement :)
http://rapidshare.com/files/130982484/PwnageToo...
RAPIDSHARE MIRROR
It worked first time for both me and my boyfriend, really great job, thank you so much.
http://rapidshare.com/files/130982644/PwnageToo...
from clubGGG!!
GUYS SOMEONE POST A RAPIDSHARE LINK ...
GUYS SOMEONE POST A RAPIDSHARE LINK ...
GUYS SOMEONE POST A RAPIDSHARE LINK ...
GUYS SOMEONE POST A RAPIDSHARE LINK ...
http://www.megaupload.com/?d=LKM5C0HY
Anyone given the PwnageTool a shot yet?
It does work on Windows!
BTW - when will we see windows version?
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
DEV TEAM I LOVE YOU !!!!!!!!!
http://rapidshare.com/files/130983102/PwnageToo...
Uploading 67% Done
http://youshare.co.uk/iphoneworld
The french forums are very happy !!! I'll donate for your work !!
Damn it.
hustle harder! )
10 PRINT "THANK YOU! iphone-dev.org Jedi masters."
20 GOTO 10
RUN
CHAMPANE FOR EVERYONE !!!! :D :D :D :D
http://rapidshare.com/files/130983343/PwnageToo...
http://rapidshare.com/files/130983343/PwnageToo...
http://rapidshare.com/files/130983343/PwnageToo...
http://rapidshare.com/files/130983343/PwnageToo...
http://rapidshare.com/files/130983343/PwnageToo...
http://rapidshare.com/files/130983343/PwnageToo...
Please keep working as always.
Greetings from Costa Rica.
So... Do I need 2,0 firmware for doing it?? (I want to recheck it about this...)
another mirror ;-)
Torrent up... help seed if you can - I have shitty upload
You guys from the Iphone-dev-team always deliver
Thanksssssssssssssssssssss
http://iphonefreakz.com/iphone-firmwares/
http://robertdougan.com/apple/pwnagetool-20-rel...
http://www.megaupload.com/de/?d=WXCCYPSC
I hope it works, this is my first try....
Have phun,
DJ
Is this for mac's only? if so when is there going to be a windows version avaliable???
pleaseeeeee answer backkkk
Other Mirrors here:
http://youshare.co.uk/iphoneworld
Thank you so much, guys!!!!
You can bet I'll tell everyone to only use PWNAGE, forever!
Keep up the great work and kick some ass!
http://rapidshare.com/files/130984119/PwnageToo...
Tomorrow when I am with my Mac I will surely post some feedback here :)
Gotta go sleep, have 3 iPhones to upgrade tomorrow morning ;)
Thanks guys.
Sincerely,
Eduardo Almeida
(Devteam fan :P)
PS/Edit: I have 2 dedicated servers, I can offer 2 mirrors if you would need, as I can't donate money, maybe I can donate bandwidth :D
I don't know what I'm supposed to do ... where should I put the file ?
http://hackint0sh.org/forum/showthread.php?t=46377
WINDOWS VERSION HEREWINDOWS VERSION HEREWINDOWS VERSION HERE
http://sleepers.net/news/
Thanks in advance!
JWSTigre
Thanks for all of the hard work guys! You're Great!
Please if somebody can make a movie and post on youtube with exact unlock procedure, just to make it clear.
Thanx
PS post a link with from youtube here for everybody
The Dev them are brilliant,
does anyone know how long it will be till it's ported to WIndows?
+ can you SSH the appstore programs to the iPhone, and do they work without authorisation?
thanks again guys(and girls!)!!
IT'S WORKING. THANKS GUYS!!!!
THANKYOU! THANKYOU!
'Pwnage Tool is an application that automates and simplifies the new method of "Pwning" an iPhone or iPod Touch. Currently this application exists only for Mac OS X (10.4+).'
Thank you---Seattle
i use a macbook pro with os x 10.5.4.
in the first version of the pwnagetool you can pwn your iphone seperatly from the IPSW-build-process. i miss this function... :-(
"Update 3: If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool."
http://sleepers.net/news/2008/07/20/pwnage-opti...
http://sleepers.net/news/2008/07/20/pwnage-opti...
does re-boot mean restart yr mac???and wat do u do with the bootloader ??? plz help
you're all heros!
thank you guys!
http://uploaded.to/file/ih0z65/iPod1,1_2.0_5A34...
greetings from germany
http://appldnld.apple.com.edgesuite.net/content...
Please if somebody can make a movie and post on youtube with exact unlock procedure, just to make it clear.
Thanx
PS post a link with from youtube here for everybody
The other web site's instructions didnt work for me. I kept getting (6) error. This is the only way it finally worked for me
http://iclarified.com/entry/comments.php?enid=1...
Thank you, thank you so very much - we all love you ALL....
Tony - Singapore.
Downloading this to my windows machine and pulling it over to one of my macs tomorrow to check out the interface =)
I had the same error however somehow it seems to now be working. not sure how long this will take.
A big bear folder just appeared asked me to enter a password and closed. Still seems to be working.
Once complete:
it will ask you if you have pwned your phone before, i clicked NO.
You then have to put your phone into DFU mode, which it kindly guides you through (thanks guys as i actually forgot).
Once this is done the newly compiled firmware should appear on your desktop.
When iTunes is opened, restore (holding OPTION) and navigate to your custom firmware.
RESTORE and Voila all should be Peachy.
ありがとう！
谢谢！
Are these settings good? i'm currently on unlocked 1st gen 1.1.4
I don't want screw things up so, is this stting good?
Plssss bring it :)
ftp://ftp.iphonefix.de/Pwnage/
I believe you have done an amazing job. Not only in working so hard in getting this software ready, also in keeping all this very impatient bloggers at stand (including myself!)
If you have an paypal account I will be more than happy in pass you my spare change.
Again, thank you for such incredible job.
bty running Mac OS X in VMware.
Very many thanks....
Upgraded successfully - worked like a charm..
Very well done - you now deserve a break...
Rgds
http://rapidshare.com/files/130986577/bootloade...
Search the web > No
Search your Mac > Yes
http://fileload.us/97974738-PwnageTool_2.0.zip
THX dev team !!!!!!!!!!!!!!!!!
http://www.demonoid.com/files/details/1557885/7...
guess i'll continue patiently waiting. maybe zibri's got something.......
thanks dev team
hope it comes quick.
http://thevistaforums.com/william/PwnageTool_2....
http://kosmictech.com/PwnageTool_2.0.zip
http://www.mediafire.com/?sharekey=e6929dbd69d2...
And just to be sure:
I used the pwnage 1.1 tool to unlock my iphone but i don't have the pineapple logo , i know this is stupid but just to be sure, i sould say "yes"right?
Thanks
Iphone US simlock
I had already installed v2 firmware before which didn't work of course :)
Does itunes log anywhere on the MAC?
got Iphone 3g with actually fw345 trying to put modified 347.
Patch by pwn is ok, the ipsw file is generated, but pwn give error "Fail to enter DFU mode" even if im in DFU (USB+itunes icon). I tried to put the ipsw file with itunes, it extract and fail with unknown error 6.
Ill try to transfer the .ipsw file to a windows box to try to restore with itunes.
Does itunes log anywhere on the MAC?
got Iphone 3g with actually fw345 trying to put modified 347.
Patch by pwn is ok, the ipsw file is generated, but pwn give error "Fail to enter DFU mode" even if im in DFU (USB+itunes icon). I tried to put the ipsw file with itunes, it extract and fail with unknown error 6.
Ill try to transfer the .ipsw file to a windows box to try to restore with itunes.
And phone dont want to do a normal boot now it seems ...... :-(
In fact itunes+USB logo is NOT DFU, the real DFU dont display anything.
I followed step from here : http://www.iphonepassion.com/2008/03/19/safety-...
And this fail with error 1602 :-((
Hoping not have bricked the phone.
Will retry with the pwn on mac instead of the .ipsw file on windows box
I just rebooted and it seems to work. ill verify fonctionnalities now.
Excellent work!!!
enjoy
why i get this?
please tell us how we can change that ?
THANK YOU and CONGRATULATIONS for your work !
Thanks
error 1600 WTF?
"no firmware bundle found" message after i select my iphone, i dled the latest 2,0 .ipsw file and when i do the "select file" from expert mode it says "wrong firmware bundle selected" wtf
Scroll to the bottom
Scroll down towards the bottom. Grab both 3.9 and 4.6
could you post a custom_restore of 1,1 2.0 pls
Very clean, very easy to use piece of software!
You guys are > *
Thanks again!
WHYYYYYY???????
1) Plug in your Phone
2) Turn it off while plugged in.
3) Press and hold the Home button and then press and hold the power button.
4) After about 3-5 seconds, let go of the Power button but keep holding the home button.
5) Your screen should turn on and eventually show the iTunes logo
Hope that helps :)
What I posted was to bypass the problem of getting the Error 1600 or Error 6 when Restoring the custom firmware to the already Pwned device.
then try the pwn process again and it should be able to put your iphone in dfu and u wont get error 6.
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
App asks for ipsw file...so i point it to the iPhone1,2_2.0_5A347_Restore.ipsw file on my desktop but it says it is the wrong firmware??
This is the same ipsw file that is running on the handset now..
Any thoughts?
If you restore through iTunes, then the firmware will be under ~/userfolder/Library/iTunes/iPhone Software Updates/
http://www.macrumors.com/2008/07/11/upgrading-f...
###########################################################
Downloads :
PwnTool_2.0 : http://rapidshare.com/files/130983343/PwnageToo...
BootLoaders : http://rapidshare.com/files/130986577/bootloade...
Thanks dev_team :)
###########################################################
###########################################################
Thanx guys
if so click no.
hope that helps.
Please if somebody can make a movie and post on youtube with exact unlock procedure, just to make it clear.
Thanx
PS post a link with from youtube here for everybody
YOUTUBE-IT PLEASE , the whole thing from docking to last "enter"
2008-07-19 17:53:14 - Failed to prepare x12220000_4_Recovery.ipsw file.
Is it possible to use my friend's apple computer to unlock my iphone, & then to continue to use my phone with my pc?
I heard that if I were to switch from using an apple computer to pc, it would force me to restore...
http://files.newagepcs.com/iPhone%20Filez/unloc...
it's awesome!
MIRRORS:
http://www.esnips.com/web/Pwnage20
http://rapidshare.com/files/130989692/PwnageToo...
....booting into my Hackintosh (LEO4ALL V3)
I've been following this b/c I am waiting for the 3g unlock. Will continue waiting patiently. (no questions on "when" :-p )
Moving to mac was the best move ever, no spyware, viruses, no trying to find drivers, and if you love windows soooo much install it on your mac, christ it runs better on my MBP than on my Acer.
But does it work on a OSX Leopard?
mfg
Mavster
</sarcasm>
to anyone with iPhone 2G 1.1.4 who can't figure it out, here's how I started out:
First get the bootloader files... links can be found in other comments on this page. (BL-39.bin and BL-46.bin)
Connect iphone to Mac > Click Restore button > ipsw file starts downloading > Disconnect iPhone while downloading > When downloading is done open PwnageTool 2.0 and follow instructions from there.
(I'm not done upon writing this comment, so i hope it works...)
(Aussie here!) - woooooooo!
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE MAKE A PC VERSION!!!!!!
http://hq3gp.com/apps/iphone-dev-team-unleashes...
I salute you !!
Pls answer
Dev team: THANKS! Good job!
http://rapidshare.com/files/130990503/boot_load...
=D
Doesn't seem to work with the iPhone (classic) selected. The 3G option finds and uses the 2.0 firmware build 347, but the classic iPhone option does not see build 347, and gives me an error if I try to select it. I'm downloading 345 right now.
Keep it going! ;-)
I've got an iMac G5 Tiger and I'm not able to launch the app...
No problems encountered. A little disappointed that Installer.app not supported (yet). However am well aware that the dev-team don't write that code. And that most of the old 1.*.* firmware a aren't compatible with 2.0 yet anyway.
Cydia installed, but same deal on apps other than system tools.
This will come, I am sure.
I use ATT, so didn't need to activate or BootNeuter. When running this set up, just click on Expert Mode. Deselect theboxes for activation and boot neuter. Then proceed.
I have the bootloader bin files on my computer in the same directory as the Pawnage App. But couldn't locate.
Ups to the dev team!
doesn't work at all on my 10.4 G4 :(
Hope this is just a minor bug that can get fixed soon...
please help or give a firmware for downoading which work
thanks very much
And for all you windows users, BUILD A MAC and shut up.
Thanks again Dev Team!
for bootloaders 3.9 and 4.6
Normal? :/
Oit says, bootloader 3.9v file not found ? what di i do ?
http://rs147.rapidshare.com/files/130990503/boo...
Help!!
Greets from Germany
Thanks fro Bogota !
"No Bootloader v3.9 file found!"
What should i do?
###########################################################
Downloads :
PwnTool_2.0 : http://rapidshare.com/files/130983343/PwnageToo...
BootLoaders : http://rapidshare.com/files/130986577/bootloade...
Thanks dev_team :)
###########################################################
###########################################################
from italy :)
windows version? shut up and enjoy!!!!!!!!!!!
http://iphonenilla.com/2008/07/20/fyi-why-arent...
It builds the custom .ipsw, but fails to enter DFU mode.
I see this in the log:
2008-07-19 20:09:22 - Successfully built custom .ipsw file at '/Users/......../Desktop/iPhone1,1_2.0_5A347_Custom_Restore.ipsw'.
2008-07-19 20:09:24 - Failed to prepare x12220000_4_Recovery.ipsw file.
I also tried manually putting the phone into DFU mode before running PwnageTool - same problem.
Does anyone have any ideas???
Thanks,
- Paulb
PT2.0 WOOORKS!!
thx dev-team :)
I just ran it and it's not taking any actions.
Please let me know.
WHAT CAN I DO?
I'VE BEEN WAITING FOR THIS APP FOR A VERY LONG TIME! PLEASE HELP!
running macbook pro with 10.5.4 all updates installed
So the next question is WHEN WILL IT BE AVAILABLE FOR WINDOWS USERS??
Doing advanced now & boot neuter running. Was gonna ask if you guys wanted a fast mirror but doesn't look like you need it.
Flys to shit my friends, flys to shit
I WILL LOVE YOU FOREVER!
WE'VE HAD TO WAIT ASWELL N I SUPPOSE WE'VE GOT TO WAIT EVEN LONGER :(
i'm french so dont hurt my lol
http://rapidshare.com/files/130993389/PwnageToo...
thnx dev.team!
Now my old iPhone is working with the 2.0 firmware version.
Thanks a lot....
You are amazing...
Greetings from Costa Rica again!!!
http://www.sportplanners.com/songs/PwnageTool_2...
thanks!
Thank you.
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
http://rapidshare.com/files/130994201/PwnageToo...
Requesting Windows port! Im too poor to afford Mac yet!
lol- notice not one of those whiners and complainers has posted this time? Funny how quickly they disappear. ; )
Mirror (fast hungarian server):
http://www.send2u.hu/get/?f=fg461QRvfsvyTbWYQoIv
regards,
Johnny
New Mirror .....
http://rapidshare.com/files/130990426/PwnageToo...
mirror!!
some tutorials ?
Just uploaded to gigasize.
http://www.gigasize.com/get.php?d=scpmvb1dtvd
And thx a million dev team, we've all been waiting for your little miracle!!!!
It can't be real...
THAN EVERYONE IS HAPPY, ALSO THE WINDOWS GUYS!
2008-07-20 01:32:22 - Failed to prepare x12220000_4_Recovery.ipsw file.
Beers on us!
Thanks anyhow!!!
Thanks anyhow!!!
1. http://rapidshare.com/files/130995144/PwnageToo...
2. http://rapidshare.com/files/130995198/PwnageToo...
Using iPhone 3G, itunes 7.7, firmware 1,2_2.0_5A347, OS X 10.5.4
email bose.jhebert(at)gmail.com
###########################################################
Downloads :
PwnTool_2.0 : http://rapidshare.com/files/130983343/PwnageToo...
BootLoaders : http://rapidshare.com/files/130986577/bootloade...
Thanks dev_team :)
###########################################################
###########################################################
iPod touch 8GB, on 2.0, I clicked "no" when it asked if I had pwned before, said it failed to enter DFU mode, then I option-clicked the firmware in iTunes, and the finished "Extracting software" and then gave me an unknown error, -6. Now I can't even restore to the normal firmware without it giving me that error!! HELP!!!
but i am still able to restore with old firmware.
http://iphonefreakz.com/iphone-firmwares/
but I am still having problems..."Error 6"???
but will keep trying...
Once again THANK YOU SO MUCH!
Thanks for all your hard work on this. It works perfectly for me.
Sincerely,
Marco.
Thank you so much, dev team !
1gen iPhone with FW 2.0 works perfect with Swiss Orange provider!
THANX A LOT DEV TEAM!!!
http://hq3gp.com/apps/iphone-dev-team-unleashes...
I cant find anything out there that says 2.0
Thnx for this lovely tool! Keep up the good work
http://youshare.co.uk/iphoneworld/forum/showthr...
absolutely love you mwah !
Tried rebooting and powering off the machine. No luck
De la bombe atomique !!!
1. telecharger le firmxare 1,1 2.0
2. Telecharger les bootloader 3.9 et 4.6
3. PwnageTool 2.0 ;)
4. Mode restore via iTunes (Command + restaurer)
5. Kifffffffffffffff :P
Merci la Dev-Team !!!!!!!!!
Thought I'd post some instructions since I've seen a couple of posts asking for them, you can check them out here:
http://www.oneyearandcounting.com
Thanks again Dev-Team, it was well worth the wait!!!
And thank you Dev Team, you guys are awesome.
wtf.
http://rapidshare.com/files/130993389/PwnageToo...
pwned.greek-iphone.com
Cheers to dev team! You guys rulez!
isn't that 2.0?
anybody got a link to 2.0 ispw??????????????
Mirror time:
http://hq3gp.com/apps/iphone-dev-team-unleashes...
##############################################################
Can someone please post a link of thier custom image to download!
iPhone1,1_2.0_5A347_Custom_Restore.ipsw
Thank you,
##############################################################
##############################################################
Seems to have something to do with the new spotlight indexing (the 'mds' process is going crazy). Just let it spin, though - it will get done eventually.
mds died, then pwnage spun forever
choose yes to pwned before
then restore with custom firmware
:D
I love Dev-Term and thanks for your hard work!
Thanks, man!
How do I go about using that screen to enter DFU mode?
I also got the "Cannot enter DFU mode, get a Zune" message, so I just closed the app and put my iphone in recovery mode and connect it to iTunes. When in iTunes, I clicked "Restore" while pressing the "option" key and selected the IPSW PwnageTool built.
Then I just sat back and waited for the restore to complete. =D
http://www.demonoid.com/files/details/1557958/?...
THANKS to Dev Team...
We LOVE you !
You are champions. You are clever and deserve all the best in your lives. After having my iPhone bricked once I updated to v.2.0 (from 1.1.4), and since I use Virgin in Australia, the "unauthorised" carrier, I was not able to power up the iPhone and not even use it as an MP3 player. Although I love Apple for their design and cleverness, I hate them for becoming too greedy and wanting to force customers to a particular carrier only, so they can get a bit of the profit from people's calls. Telstra (iPhone reseller No.1 in Aus) is a rip-off big time (everybody knows this, except them), Vodafone (iPhone reseller No.2) doesn't have the coverage where I work, Optus (iPhone reseller No.3) doesn't have the deals like Virgin (who are not selling iPhone (yet)). And I am not a criminal, I bought my iPhone last year (long before it came to Australia) and certainly I had to order it unlocked to use it here. I paid for it with my hard earned money, and I was very upset when my iPhone bricked completely with the update to v.2.0. Dev Tem guys, you returned my phone today with so many important numbers and calendar appointments, and you did it for free.
Your PWnage tool is so clever, and complete, that I had my phone recovered within half an hour or so, even if I did not have the bootloader and what not.
The PWnage made everything so easy, so I rebuilt my own installation package and I am nor running v.2.0.
I already paid 23 Pounds three days ago to some wankers at (iphoneunlocking.org.uk) for their software that didn't work. Not only it didn;t work, they never respond, although they guarantee your money back.
To all possible unlockers that found themselves in a similar situation as myself - DO NOT USE the iphoneunlocking.org.uk - THEIR SOFTWARE DOESN'T WORK.
And one last helping point to some that may end up needing bootloader 3.9 and 4.6, you can find them here (http://iphonefreakz.com/iphone-firmwares/).
Dear Dev Team guys I want to pay for your trouble, although I know you did it for free.
I will feel better if at least I pay you the same amount as I paid to the above mentioned wankers, please give me details how can I do that (my e-mail address is visible to you).
All the best and keep up the good work guys.
after my bloody valentine live, this is a seriously nice surprise
THANKS again, some money I earn as an engineer would go to you the minute you would accept donations
Help !
my OS is Mac OS X 10.4.11 (8S2167)
Thank you and keep up the good work
Phone was originally unlocked with iphonesimfree and on 1.1.4. and the optus network in australia
created IPSW with pwnage tool, restored using this and now phone is unactivated and locked.
Help!
i think we _really_ messed up... i can't even revert it to a 1.1.1 via itunes 7.7...
trying to do that now with itunes 7.6.2 though, hopefully that will work to at least get it back to a functional state
I tried to get the phone into dfu then restore with the ipsw that pwnage tool made but it wouldn't work with itunes ('unknown error)
Please help!
2008-07-20 03:04:09 - Failed to prepare x12220000_4_Recovery.ipsw file.
Just dont my 1.1.4 on Orange to 2.0.
Just a couple of things. Put the phone into recovery before starting PWnage i have found to work fine,
Also i initially did a simple process of creating firmware but it did not activate the phone. I then went back and did an advanced firmware creation and it worked peachy!!!
Help !
The right version for 1st generation iPhone is: iPhone1,1_2.0_5A347_Restore.ipsw (!!!)
NOT THE iPhone1,2_2.0_5A347_Restore.ipsw (--> this one is intended for the 3G Phones)
So get the right ipsw and evrything just works fine!
THX SO MUCH FROM LUXEMBOURG Dev-Team!!!
Greeeeetz
I got it from the mirror and put it a torrent up on pirate bay. Seeding right now.
I tried update and got error 5 from iTunes. Apparently something with my version of iTunes. Put my phone in recovery mode. I restored to custom 1.1.4 I had, reintalled iTunes 7.7 and I'm updating as I type.
Is there any step by step installation guide yet
iPhone Dev Team are the best!!!
1.1.4 (pwnaged) J+A+U ----> 2.0
FANTASTIC JOB
Thanks Dev Team. Now I can go to work tomorrow without having to refresh every 5 minutes. Bosses all over the world will be glad to have their productivity levels return to normal.
Thanks again for all your good work.
Thank you dev team!!
thanks so much!
Thanks,
Dustin
iPhone 1st Gen, Hackintosh with Pwnage 2.0.
Put my phone on DFU via windows and tried again, same problem (can i use the image built by Pwnage via iTunes?)
Thank you.
http://www.iclarified.com/entry/index.php?enid=...
Make sure you are in DFU mode properly?
DFU= hold power/home for 7 seconds, screen goes blank, wait 2 seconds with blank screen and release power button, keep holding the home button until itunes recognises the phone as in recovery mode and the phone has a blank screen
"Thank you" isn't enough!
Guess I'll join the "I love you" crew!
You deserve!
trying right now
J-M
http://rapidshare.com/files/131000665/PwnageToo...
http://rapidshare.com/files/131000665/PwnageToo...
http://rapidshare.com/files/131000665/PwnageToo...
http://rapidshare.com/files/131000665/PwnageToo...
Thank you very much!
The wait wasn't so bad after all... Now I have a login at DISQUS! :P
http://rapidshare.com/files/131000665/PwnageToo...
http://rapidshare.com/files/131000665/PwnageToo...
your tool won't accept1,1..2.0_5A347
What do I use? thats all thats out on the web HELP!
u: guest p: iphone
if someone can post iPhone1,1_2.0_5A347_Custom_Restore.ipsw
hwrevd1, for your custom image, gimme your MSN address, I'll need you to tel me the settings you want
#####################
Using iPhone 1st Gen, restored to 1.1.4 orignal.
Using Pwnage 2.0 on hackintosh.
any solutions?
Im restoring back to the apple firmware until this gets the bugs ironed out of it
Super work team, once this baby gets installer working it'll be perfect. ^_^
Awesome!
ANYone have a link????
http://appldnld.apple.com.edgesuite.net/content...
http://appldnld.apple.com.edgesuite.net/content...
Try redownloading everything, fix your HD permissions, in case of.
I am using windows and have no access to a Mac.
Please add me on MSN on call_me_mickey_mouse@hotmail.com
I would REALLY appreciate it!
Thank you :-D
www.macbug.de
Greetz and thx to the dev team!
For the people who are stuck and confused please visit: http://youshare.co.uk/iphoneworld/forum
Here's a tutorial!
http://www.oneyearandcounting.com/
How To DFU Mode!
http://www.iclarified.com/entry/index.php?enid=...
Read carefuly and just relax! :D
Let's try and see!
Any solution please?
Was ANYBODY able to use the tool on a mac laptop of any kind?
###########################################################
Downloads :
PwnTool_2.0 : http://rapidshare.com/files/130983343/PwnageToo...
BootLoaders : http://rapidshare.com/files/130986577/bootloade...
IPSW 2.0 (iPhone 1st Gen) : http://appldnld.apple.com.edgesuite.net/content...
Thanks dev_team :)
###########################################################
###########################################################
I tried 2 different restores with custom pwnd firmware, flashed to both bootloaders, but still no WIfi...
THANK YOU SO MUCH FOR YOUR GREAT WORK!!!
PLEASE
THANK YOU
Dev team, Thanks so much for your hard work!!!!
All is working great, and the tools is certainly easy to use.
Great job.
http://www.re-pa.ch/2008/07/20/pwnage-tool-frei...
I'm sure they are working on it, it's been asked like 89 times in the post. AND, if you do succeed, post what iPhone and firmware you succeeded on so other will know what is and isn't possible.
Faslane
vodafone italy
Update worked like a charm. Thanks guys.
[TIME STAMP] - Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Failed to prepare x12220000_4_Recovery.ipsw file.
Any ideas?
I never give up on believing u guys!
And u really bring it here!
You guys are so awesome!!!!!
Thx from a Hong Kong little fan
I cannot get the app to open on Leopard. Just bounces in the dock and never opens, I eventually force quit the app. I've restarted, downloaded it from several sources and still the same thing, how can i get around this?
Can anyone help?
What am I dong wrong?
Again great work!!!!!
Its a great tool! AND it was worth the waiting!
THANKS ALOT!
ps: any news about when the new installer is going online?! the Rep team said it would be launched when the PwnageTool 2.0 was launched! Cant wait!!!!
##############################################################
Can someone please post a link of thier custom image to download!
iPhone1,1_2.0_5A347_Custom_Restore.ipsw
Thank you,
##############################################################
##############################################################
Thanks for the work all!
-> a second platform would be awesome
##############################################################
Can someone please post a link of thier custom image to download!
iPhone1,1_2.0_5A347_Custom_Restore.ipsw
Thank you,
##############################################################
##############################################################
I told you to gimme your MSN address to prepare it the way you like... :)
##############################################################
##############################################################
I am online now. I am using First Gen iPhone, Need Unlock, Activate and Jailbreak.
Please Add me!
Thanks :-)
Will you release a Windows version? When? Do we have to wait 2 weeks like in April???
PWNAGE4WIN
I installed apple's 2.0 software on it, and when the itunes activation obviously failed, used pwnagetool on it. It creates the .ipsw but then says "failed to enter DFU mode"...when it is in DFU mode the entire time. In log it says: "Failed to prepare x12220000_4_Recovery.ipsw file."
I also tried to put it into recovery mode and to use itunes to restore the custom .ipsw, but this also fails, itunes tells me: "the iphone "iphone" could not be restored. An unknown error occured (6)".
After all this testing and all the hype we get this? Very disappointed.
It works great now, thanks a lot dev team!
zero: hwrevd1@hotmail.com
##############
my 3G iPhone got bricked. I'm not stupid.. I did everything as the app said.. did not use bootneuter or anything dangerous, but I can't get any signal.. tried rebooting, airplane-mode, sim-card switch, but still no signal.
:'(
A quicker way if you are good at the shell prompt is to use Cydia to install openssh, log into your iPhone, and do "rm -rf /var/root/Library/Lockdown" and then reboot your iPhone.
I've tried:
* rebooting several times
* restoring the P-ram
* restoring permissions
* deleted, re-downloaded
* different internet connections
It just keeps on bouncing in the dock...
Pleaaase! It'd truly make my day.
http://www.iphonealley.com/forums/showthread.ph...
cheers from switzerland...
Help!
Read Carefuly!!!
http://www.oneyearandcounting.com
Good Luck!
Thank you Dev Team
I am a touring performing mind reader. If you guys ever want to do a fundraiser let me know. Much respect for all the love.
www.scottxavier.com
DFU error :S
I have installed fw 2.0 because I thought it was like the ZiPhone :((((
Thanks again
GREAT WORK TEAM
Thaks alot!!!
Can anyone help, I just get that it can't find the firmware .ipsw. I'm on a 1.1.4 jailbroken and the .ipsw is in my Library>iTunes>iPhone Software upgrade
Anyone know what the problem is?
jake
:((((
Thanks
Running Leopard with all current updates, intel.
Greetings from Vienna!
After creating the custom firmware with Pwnage Tool, I restored through iTunes with no errors, however even if my phone has operator signal, IT IS NOT ACTIVATED.
http://palmforumbr.blogspot.com/2008/07/lanamen...
I backed up my 2G phone before the procedure (phone was previously pwned at 1.1.4) and all worked fine, but when you go for the re-sync of music from iTunes, you get no dialogue from iTunes. Solution - deselect one of the playlists and hit apply. Then it does....
http://i33.tinypic.com/2h8btwk.jpg
Fails at resizing the restore ramdisk to 19m.
Any help?
thanks team.
good things come to those who wait.
and buy mac.
As to those wondering about the 3.9 thingy, i had the same problem...just download the files at http://www.enkrypted.com/bootloaders.rar
Then in pwnage choose browse, and select the bootloader file (in my case 4.6)
Anyway.. thanks! I hope everything works.
PS: Sorry if there's problems with my english.
Go here:
http://palmforumbr.blogspot.com/2008/07/lanamen...
is there any way that we can have the Installer.app, in the pwnage says not supported???
:((
You can upload it to rapidshare and be the Windows users savior!
Your help will be GREATLY appreciated.
ARE YOU KIDDING ME!!!
This is just fucking great...
make sure you are using iPhone1,1_2.0_5A347 and not iPhone1,2_2.0_5A347
THANKS DEV TEAM!!
Thank you, merci, köszönöm, спасибо, tak, grazie, arigatô, paldies, blagodaram, dziękuję, dakujem, tack, hvala, aciu, spas, toda, kiitos, dank u wel, Баркал, salamat, Дзякую, chnorakaloutioun, chokrane, saha, faleminderit
Any tips?
Any tips from here? should I fully downgrade baseband and start again? or can I just restore to the Custom ipsw with 7.7 after the downgrade finishes?
Please give me an answer!
Now why couldn't it communicate with your iPhone? Could it be that it was on Auto-Lock? I struggled with this thing forever until I figured it out.
Your iPhone should be on its home screen as normal. If you're in Recovery Mode or DFU mode, just hold down Home and Lock until it reboots normally, and let go. Go into your settings, General, and turn off Auto-Lock. If iTunes is running, quit it. Delete anything in ~/Library/iTunes/Device Support. Now start Pwnage Tool and everything should work fine. Good luck!
http://www.iclarified.com/entry/index.php?enid=367
Then, press the ALT key on your keyboard and at the same time click Restore in iTunes, a box will appear asking you to locate the custom firmware and just locate it from the one you created Pwnage. Hope this helps!
Reply to this if you want windows version
I'm a guy in cyprus who had bought the 1st gen iPhone one year ago..When i bought it it came already unlocked, jailbroken, and activated..But when the 2.0 software came out, i waitedi decided to try this Pwnage Tool..I was worried that i couldnt do it, because i simply didnt know how to..But this interface was soo easy to use, im glad you waited to release this till it was ready because you made it very user friendly...so in conclusion, i want to state that I am the first person in Cyprus and maybe even the mediterranean to "Pwn" their 1st gen iPhone to 2.0 software and have it working on Cyprus' Cytamobile Vodafone telephone network!!! =) thanks dev team!!
ps. I had one problem with the Pwnage Tool.. The boot up logo..I actually liked the apple boot up logo..it made the phone seem more original, and like a real apple item..Now it looks like a cheap apple rip-off...no offense, i love the tool, but i chose the simple mode and didnt get a chance to keep my logo =C, but i dont wanna go through the whole process of "Pwning" my iphone just to change the boot up logo...but still good work
I've got the new iPhone 3G unlocked by PwnageTool but is not available with CYTA network. Do you know any solution that could help to make my iPhone 3G work in Cyprus?
what i done was restore my old iphone in the newest itunes and it automatically loaded 2.0.
then used the PwnageTool and it asked me for 3.9 loader and the latest one 4.9 i think, anyway theres links here and on sites to download them now,
the trickiest bit was getting the iphone in dfu mode, and having the phone in the right state when it was in the PwnageTool, got there in the end... now i'll crack my new 3g iphone!
thanks once again , (ah and theres the home screen! *sigh* ) lol ;o)
Do the world a favor, buy a MAC!
I know it isn't easy to make these kinds of programs and this to you is only a comment, but please make a Windows as many Windows users would love to use this program.
http://www.iclarified.com/entry/index.php?enid=367
many thanks
hmmm... anyone figure this one yet?? i kept getting DFU error in pwnage so i just tryed restoring.... got that error 6
HELP ??
has anyone got the same problem as me,,,
i download it and openit up all it does is bounce for 2 mins and them it stops and freezes????
anyone have ne ideas???
I am using iphone v1, 2.0 firmware
nerdnuts@gmail.com.
arturo
please link me folks!
link me folks!
LOVE IT! Thanks Dev Team
Now will patiently wait for the unlock for my 3G unit...
Again from the iPhone community - BIG THANX
The icon just bounces for around a minute then there is no window? Or a blue dot underneath it?
Help!
Running Leopard!
Thank you guys!
Anyway the following happen to me - started Pwnage tool 2, go bouncing icon for a couple of minutes, then it just stopped.If I clicked on the icon the apple icon and pwnage would appear in menu at top of the screen. Clicking on the Apple icon would not produce a dropdown. By moving to another app the apple icon would give a propdown and I could force quit pwnage.
I started pwnage again with the same bouncing icon effect. This time I put the iphone 2G 16Gig into DFU mode, Itunes responded and a pop-up appreared saying "Yhe application "pwnage Too;" cannot be launched" with an error code -1712 and the pineapple icon started bouncing again. Hope this helps debugging
Once again great work iphonedev team but those software developers need to hurry up and get the apps ported.
Custom IPSW 2.0 for iPhone 2G #################(NOT 3G)##################
#####################################################################
http://rapidshare.de/files/40034819/iPhone1_1_2...
Activate the phone : YES
Baseband Update : NO
Disable Partition Wipeout : YES
Root Partition : 500MB
Neuter Bootloader : YES
Bootloader update : NO
Unlock Baseband : YES
Auto Delete BootNeuter.app : YES
Cydia Installer + Recommended sources for Cydia + BigBoss Rep
Custom Logos : NO (sorry dev team,I prefer the Apple one :D)
worked for hwrevd1 on PC
#####################################################################
#####################################################################
THANKS!!!... :P
I will report if it works for me.
Did someone already tried this file in Windows with an iPhone 2G? Please report!
Upgrade to 2.0 went very smoothly!
HIGHLY RECOMMENDED FOR PEOPLE WHO ARE USING WINDOWS AND CANT MAKE THERE OWN!!
Musti I pwn my iPhone before trying this?... Please help me :(
using the custom firmware
It's that simple.
De chile!
_________________________________________________
Thanks you Thanks dev team, they are the best!
From Chile!
http://www.iclarified.com/entry/index.php?enid=367
Then, press the ALT key on your keyboard and at the same time click Restore in iTunes, a box will appear asking you to locate the custom firmware and just locate it from the one you created Pwnage. Hope this helps!
Hold power button until you get a red bar indicating close. slide the red bar across. Hold power and home together and hold for 10 seconds(exactly). Let go of power button and keep holding onto your home button until you mac and Itunes reconizes your iphone and a messsage on itunes saying 'your in recovery mode. Close Itunes and redo the process over and it should work. You will need to remove the desktop folder the program created. any further questions feel free to email me at biggrins@live.com
i ran the whole processes and it still bricks me.
=[[
Thank you for providing us with the tool for making our devices "free" to play!
Highest regards from the UK
One thing people are missing it seems is that you must hold down option while hitting the restore button in itunes. Then select the ispw file created on your desktop, it takes a second then click open
If you see the cable and itunes logo you are in RESTORE mode NOT DFU
I would be happy to mirror it if the dev team ever needs more BW
ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhgggggggggghhhhhhh
fuckin shit im runnin leapard,,,, hope they fix this tomorro
any wait thank-u, so much for takin` care of this dev-team!!!!!
I threw it up on my server:
http://www.stormhaven.org/PwnageTool_2.0.zip
T-Zones Hack:
go to http://arashpayan.com/blog/index.php/2007/09/17...
make the standard proxy.pac file, but store it in /Library/Preferences/SystemConfiguration, and you'll find the preferences.plist file there too, just make sure to change the address of the proxy.pac file in your edit to point to the right location... It works :)
THANKs DEV TEAM, RESPECT to you all, with the deepest admeration.
First for all, a huge thanx!!!
I have a problem with the appstore on my iPodTouch (fw 5a347) : I am fench and the AppStore appears in English and don't let me download any app :-(
Any tip?
Thanx!
Installer.app would be nice though, but at the moment I don't care.
Thanks again.
1b) If so, how do I activate? Is it a different process?
2) If an AT&T customer can unlock, jailbreak, and activate a iPhone 2G will the phone freely roam to any GSM (T-Mobile, etc.) signal or will it stick to AT&T, because that is the SIM card that I have installed?
Thank you for providing us with the tool for making our devices "free" to play!
Highest regards from the UK
Thanks
http://www.mininova.org/tor/1612779
I will seed until it gets up and going. Also looking for a solution to TMobile Edge on 2.0 let me know if you come up with any thing.
when I try to click on it, it just says pwnage tool in the menu bar on top but there is no screen.
any ideas?
thanks!
Thank you,
just rerun the pwnage app, and then follow the instructions on how to follow through with the DSU stuff.
make sure you hit NO for "are you a legitimate iphone user" because if you need it unlocked, thats what you need to do.
Any ways, I have jailbroken my iPhone 3G but why can't I unlock and jailbreak my iPhone original, it says I have the wrong firmware bundle, I have downloaded it from multiple sites and I have made sure it was the official release but still nothing.
thanks a lot guys...
iPhone1,2... restore files are for the 2d version (iPhone 3G) phones.
iTunes downloads the 1,2 version for a 3G and the 1,1 for a original recipe iPhone. Just to clarify some of the questions. And of course, YMMV.
minor note - my iPhone now runs warmer than it did when unlocked 1.1.4 using iLibertyX, although not as uncomfortably warm as when unlocked 1.1.4 with ZiPhone.
Seems only Cydia installed for me (touch). Any way to get installer on there? Or get it from Cydia?
Awesome!
Can someone please tell me how to disable edge in cydia?
2008-07-19 20:19:53 -0700
EXC_BAD_ACCESS (0x0001)
KERN_PROTECTION_FAILURE (0x0002) at 0x00000038
Thread 3 Crashed:
0 flockfile + 18
1 fread + 63
2 0x1000 + 141517
3 0x1000 + 141182
4 0x1000 + 136322
5 0x1000 + 135023
6 0x1000 + 129851
7 0x1000 + 127560
8 0x1000 + 119519
9 0x1000 + 118954
All great THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I've tried both legit iPhone user and non-legit (I am legit btw). So I guess I'll just restore to the regular software until a patch comes out. Sucks to loose all that work into some of the dope-ass apps I've snagged up :(
Getting the "Failed to prepare x12220000_4_Recovery.ipsw" error. (did the mkdir attempt)
the PwnageTool is exceptional!! Great job all.
BUT now my Mail on my iPhone is NOT working. I touch the mail icon to load but it then crashes and doesn't load. Anybody know the problem?
Thanks :)
When I use the advanced-mode (don't change anything) I can't receive any signal. But if I use the n00b-mode I do receie signal!
BUT I DON'T WANT THE FREAKINGLY UGLY PINEAPPLE!
I was updating my first generation iPhone (on T-Mobile in USA) from 1.1.4 to 2.0 and I experienced the 1600 error, and the failure to prepare error and with your advice, I created the directory the problem was fixed.
For a while I didn't realize I wasn't actually successfully entering DFU. I didn't realize the screen would be blank when this was successful.
The software functioned perfectly, thank you very much for all your hard work!
I'm off to mess with my new 2.0 unlocked and jailbroken firmware.
does that mean that i have to create it?.... can you please explain it?
I've been through the program and the suggested fixes but I'm stuck guys and could use some help!!!
Thanks
Does anyone have any ideas on how I can correct this?
Thanks,
Joe
Any help would be appreciated!
Thanks
One suggestion is that the wording may not be quite as clear as it could be in the easy mode. I feel I'm a legitimate iPhone user and so selected yes. So BootNeuter wasn't installed and I couldn't activate my phone... got a bit freaked out for 30 secs.
Anyway... I just made a custom build in the end. :) :) :)
==================================================================================
==================================================================================
For people having Mail.app problems, you can simply install terminal via cydia, then type login, then root, then alpine and then after it logs in type in (without quotes) "rm -fR /private/var/mobile/Library/Mail" exactly as spelled there and simply sync again with iTunes and it will reload all your mail stuff.
==================================================================================
==================================================================================
I agree with one commenter on the irony of my desire unlock my iphone to use on t-mobile networks and the germans desire to use it on anything but t-mobile.
gotta love it. cheers
Gracias!! ^__^
Saludos
Carlos
Downloaded the .zip file, decompressed it.
Double clicking the Pwnage Tool app causes it to bounce in the dock for an abnormally long time.
The icon remains in the dock, with no Dock "On Light"
No program windows appear, although clicking the icon in the dock changes the menu bar to "Pwnage Tool," with no other menus, and itself unclickable...
That's it. Any suggestions, peeps? I've re-downloaded, restarted, launched from the terminal, cried, drank, nadda.
AND DRINKING DIDNT HELP ME EITHER.
I'm going at it again this morning....
Working from a back up iBook G4... what are you on?
PM me if you have further problems
1) open pwnage, let it scan for your iphone software ( the fact that you had to download it makes me think that you hadnt had it, or had been working with a beta of 2.0 .
2) run pwnage tool, it take a little bit, keep the lg window open if you are as unpatient as me.
3) once it is done it will go into a dfu mode tutorial, but you know how to do this on your own so put it in DFU mode and once itunes 7.7 pops up that it found an ipod hold down option and select the iphone custom firmware now on your desktop. itunes will try and load the software and you will see a pineapple on your screen. once your iphone turns on it will go to bootneuter, downgrade some stuff, then restart and you are good to go. Its 1:33 where I am and I will be asleep by 3, I'll check this post @ 2 to see if you got it working
it didnt work until i created the device support directory and ran it in simple mode with my touch disconnected. the only thing im wondering is why was cydia installed and not installer.app?
Now go into you itune program and it popup with a message. click okay. Now you will see a button reading "recover". Hold down "option (alt) button on mac and click on the "recover" button. It will popup a window and you will want to go to your desktop and select the file you created in pwnage tool. Let it do it's trick and you got yourself unlock phone! Good luck!! THANK YOU DEV TEAM!!!!!!
is it possible to use pwnage 2.0 using vmware running leopard in windows?
I have no folder in Itunes called Device Support, or a file named mkdir
Need help
Now we just need MobileScrobbler that works with 2.0
Thanks again!
LOL! Just kidding.
The problem I'm having is that once I launch the app it bounces a few times on the dock and then nothing happens.
Did anyone have this problem? I'm on an iMac Intel, btw.
You made the wait bearable!
thanks fellas! =D
theres no application on my computer
2008-07-19 23:06:49 - Preparing Baseband Update.
2008-07-19 23:06:53 - OK
2008-07-19 23:06:53 - Detaching root filesystem from '/Volumes/BigBear5A347.M68OS'.
2008-07-19 23:07:03 - FAIL
------------------------------
2008-07-19 23:07:03 - Failed to build custom .ipsw file.
I use dreamhost and I have a few TB worth of bandwidth per minth left unused.
email me if you are ok with it.
You are NOT a legit iPhone user.... :)
Does PwnageTool 2.0 do anything in the background whilst the restore is taking place, or is the DFU guide, just a guide?
If so, I could FTP my bro the custom .ipsw as he is on a PC and has no access to a Mac!
I am using a 1G from 1.1.4.
I have managed to downgrade from 2.0 to 1.1.4 so have had some luck with unlocking previously....
Phone is now locked.
Please help!?
Quite a few people are having a problem with the application not starting.. Can I direct you to a discussion at
http://forums.macrumors.com/showthread.php?t=52...
It seems to effect Macbook and Macbook Pros... might be a bug
Thanks
thank you, so so so so much.
Thank you. After all the shit the folks gave you this week, for you to STILL be working your way through these comments, and giving genuine help the those running into issues... well, that's just downright impressive.
One Full Golf Clap to you my friend.
Personally, I did not have any issues. Everything went as planned for me. Thanks for the tool, too!
Thank you!
I tried to put my phone into DUF and the screen went and stayed black. Pwnage Tool didn't recognise DUF and itunes says the phone needs restoring but gives a 1600 or 1601 error when I try to do it.
Am I screwed?
Itunes does nothing now when I plug my phone in.....It's like it doesn't exist.
I am starting to feel sick.
Anyone with ideas?
someone will be able to help, if you ask nicely :)
Good Work Dev team im trying...
Just wondering, this only supports Macs right?
Your OSX has to be UP TO DATE when doing the 3G pwnage. (I had no idea there was an update to OSX until I went to Software Update)
I made the "Device Support" in both my user Library and my system Library directories.
I'm currently watching the pineapple do it's thing on my phone so I assume things should move along nicely.
Nice one DevTeam!!!!
please add version for windows
The DFU mode isn't a pure black screen in 2.0, but the recovery globe and usb cord. I am running Leopard.
Anyone else see this?
Any ideas?
Thanks
Thanks from mexico...
the bootneutral didnt automatically do anything...
So i guess i'm screwed now?
maybe this jailbreak only works for US based phones ?
I'm in canada ..
I have just woken up in Hong Kong to find a nice little present waiting for me.
I was lucky enough to get the new iPhone 3G on Monday and so gave my wife my old jailbroken iphone (used ziphone) at 1.1.4 version.
When I saw that you could not get installer yet, I decided I did not need mine broken as all I wanted was the installer app to get some old apps that I used to have like SMB and lexitron (love that game )
So I downloaded the pawnage tool and the restore versions along with the bootloader versions. I unzipped the bootloader versions.
I then turned my wife's iPhone into DFU mode and docked it. I then ran the pawnage tool and selected the correct formware and found the 3.9 and 4.6 bootloaders. It then made the firmware no problem and then it said it failed to get into DFU mode and asked if I wanted to try again, I said yes and it allowed me to turn off the iPhone and then it fired up and gave instructions on screen to get it into DFU mode which I followed and then all worked OK. It takes about 10 - 15 minutes for the restore process to work and you get several message in itunes along the way telling you what is happening.
The iphone then fires up and bootneuter does it's work.
It then resets one more time and all is OK, one jailbroken 2g iPhone with ver 2.0 firmware.
It then also allowed me to put the apps I had purchased at the app store for my 3g iphone onto my wife's phone. Everything working OK, no problems with mail or safari wihch I read has been a problem for some people.
All in all, my wife is now very happy and is playing bejeweled as we speak. She misses lexitron alos but we can wait until someone upgrades this for 2.0 or it get onto the app store...
cheers dev team,
Paul
A hug from Portugal to all of you.
Basically I didnt realise you had to to hold Alt key and select the special firmware file.
Now the phone is just locked with version 2.0 firmware.
Anyone can advisde to how fix my stupid mistake?
anyone do this or know how to fix my mess up?
almost done and error
2008-07-20 06:56:21 - Converting root filesystem to UDRW image.
2008-07-20 06:56:25 - FAIL
Any assistance would be GREATLY appreciated!
version also.
i think i found a minor BUG
the rootpartition created will be MAX 520 even if you set 2049
grtz, mrklippel
Im running an iMac 20" 2.4ghz Intel core 2 duo with 3gb ram and 7.7 Itunes. I m struggling to believe that my system cannot handle this new app?
almost done and error
2008-07-20 06:56:21 - Converting root filesystem to UDRW image.
2008-07-20 06:56:25 - FAIL
http://www.iclarified.com/entry/comments.php?pa...
This tutorial was written for Pwnage 1.0. But most of the instructions still apply. I more or less followed these instructions and got my first-gen iPhone upgraded to 2.0.
I went through the process and jailbroke and activated the iphone(I have 1Gen Iphone which was already on v2.0)
I think I have unlocked it as well, according to what the tool should do, but not sure if the phone has been unlocked.
How do I verify this? I popped the ATT SIM out and tried another SIM, when I did it the iphone wet to the Emergency screen(showing USB cable and iTunes image)
Any thoughts on why this is happening and how I can verify that the unlock also successfully happened?
Thanks
You need to release instruction on how to use this tool. I have been messing around with it for five hours and it really messed up my phone. I have now to go the painful way to downgrade to 1.1.4
And thank you cimkeri for your experience with the pwn tool.
Thanks once again !!
unknown error (6); and
Error 1600
I atempted to restore on both a windows, and mac computer with no luck. I atemped in restore and DFU mode pre and post creating “~/Library/iTunes/Device Support,” with no luck. As of right now I am still reciving unknown error (6.)
I have the 3G.
Running OSX 10.5 and iTunes 7.7 (obviously since i have the 3G.)
I thought I had bricked my phone, but than god I was able to restore it!
Please feel free to contact me, dev team, or anyone else, and I'd be happy to work with someone to resolve the problem.
http://www.modmyifone.com/forums/t-mobile/38681...
Thanks Dev Team!
I think the two thing that have to be stressed to new jailbreakers are:
1) YOU HAVE TO GET THE IPHONE INTO DSU MODE
2) YOU HAVE TO CLICK THE ALT KEY, AND RESTORE BUTTON AT THE SAME TIME TO BROWSE FOR THE CUSTOM IPSW FILE. Not the Apple key, the ALT KEY.
Nice work Dev Team!!
Thanks for the tool...it works like a charm...Jailbroken(with Cydia app) and Activated on ATT
My only question is how do I verify that the iphone(1st Gen) is really unlocked?
When I popped out my ATT sim and used a diff one the phone seemed to go back to Emergency screen with USB Cable and Itunes image as if the phone was not activated and not unlocked.
Please help
I have a AT&T account with a 3G. I successfully made an image with both modes (smart and dumb) with activate enabled and disabled and with the option to not do the security wipe on and off.
I've tried everything and I have 7.7.43 iTunes plus Leopard with no available software updates for the OS.
anyone else know how to fix it??????
Cheers!!!
But it's not hard... or expensive.
Google wold be your friend right now. (hint hint)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DON'T INTERRUPT THE BOOTNEUTER OPERATION WITH ME IT LAST ALMOST 20 MINUTES
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Maybe I m not lucky because for me, when I launch the .app , the icone bounce into the docks and then...
NOTHING. Did I miss something?
I use a macbook Pro with 10.5.4
Somebody can help?
I installed your stuff and it works GREAT !!! You've done an excellent work !!!
Congrats from Paris, France !
a happy guy ...
After few trials....
I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes,
and 122220000_4...something on Pwntool.
I am using I touch. 8 gb, the very first one.
1. people who have errors, go to
http://www.iphonepassion.com/2008/03/19/safety-...
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device.
hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!)
Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
After few trials....
I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes,
and 122220000_4...something on Pwntool.
I am using I touch. 8 gb, the very first one.
1. people who have errors, go to
http://www.iphonepassion.com/2008/03/19/safety-...
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device.
hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!)
Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
Anyone else get this?!
After few trials....
I tried jailbreaking for 2 hours and I finally got it
I had errors....6,1600 on Itunes,
and 122220000_4...something on Pwntool.
I am using I touch. 8 gb, the very first one.
1. people who have errors, go to
http://www.iphonepassion.com/2008/03/19/safety-...
and put your device into DFU mode first, that is NOT the one with itunes icon showing, but NOTHING ON IPOD/IPHONE SCREEN
2. then launch the pwntool, and create custom firmware file, and 12220000 error should be gone.
3. just do anything to get to RECOVERY mode, with ITUNES ICON showing on device.
4. now, your pwntool will tell you to turn off the device.
hold HOME and POWER buttons together to turn off the device. Release BOTH bottons as soon as your device is turned off. (don't hold the home button, just release both!)
Now, your device is just off. NO DFU, NO recovery, but its just turned off.
5. from now, I think its straight forward....countdown to 5, and whatever, follow the steps that pwntool tells you.
Good Luck to all.
But.. there's a way to go back to the original boot logo?
THNKS
i dont even see where im posting :-(
http://www.hackthatphone.com/20/pwnagetool_2_1s...
After going through all the steps and restoring the phone to the new ISPW in DFU mode, I can now only make emergency calls. iTunes gives me the following error:
-----
The iPhone "iPhone" cannot be used with iTunes because the information required for activation could not be obtained from the iPhone.
Check that the sim card is inserted in your iPhone and that it is not PIN-locked.
------------
Yikes. Should I now try a different unlock?
Dev team we love you guys.
Brazilian Iphone now works 2.0
http://www.benm.at/?p=448
http://sleepers.net/news/2008/07/20/pwnage-opti...
http://sleepers.net/news/2008/07/20/pwnage-opti...
"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please inter the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card"
My iphone is version 1 and it worked ok with my cellphone provider, now I have a locked iPhone and I can't downgrade .... Help!
take you a couple of days off! then hopefully we can see a unlock for the 3G as well!
Thanks
Jens
Cancunino
2008-07-20 00:39:30 - Detaching root filesystem from '/Volumes/BigBear5A347.N45OS'.
2008-07-20 00:39:32 - OK
2008-07-20 00:39:32 - Converting root filesystem to UDZO image.
2008-07-20 00:42:43 - OK
2008-07-20 00:42:43 - Scanning root filesystem with ASR.
2008-07-20 00:42:43 - FAIL
------------------------------
2008-07-20 00:42:44 - Failed to build custom .ipsw file.
any idea of what went wrong???
pc man help us out
My experience: I got Error 1600, and followed the instructions above, deleting the file I found in the folder "Device Support" within User/Library/iTunes.
One piece of advice: To put iPhone in recovery mode, I followed the instructions found in Step 9 of the iClarified Tutorial for Pwnage1.0 (http://www.iclarified.com/entry/index.php?enid=893).
Step Nine
You will be asked to connect your iPhone and put it into recovery mode.
The easiest way to do this is to hold down your Sleep/Wake button for 3 seconds. The power slider will appear. Slide this to the right to power off your iPhone. Then hold down the Home button as you connect the iPhone to the dock. After a few seconds the recovery screen will appear. (iTunes logo and cable).
Step Ten
PwnageTool will then let you know your phone is being pwned and to please wait for a reboot.
I hope this helps.
Make sure you put your iphone into DFU mode.(Not the usb n itune icon but a black screen DFU)
Follow this http://www.iclarified.com/entry/index.php?enid=...
Then the DFU fail screen will no longer show but a step by step how to get into DFU will be shown in pwnagetool. Just follow that and you will able to complete the process.
Now I'm stuck in recovery mode, (the cable going to the iTunes icon on my 1st Gen iPhone) and can't get into DFU. The phone won't switch off. Just keeps rebooting. Can anyone suggest something? I'm at ctbritt@gmail.com. Thanks please!
If the phone is not in DFU mode before you use the Tool then you will continuously get the error message.
Thanks again for the incredible work.
JP
No mac (yet), so no Pwnage Tool for me :-(
..
PS I Might have done something wrong >/ I also have donated to you guy .
Thanks in Advance
in the meantime, i'll be waiting on that iphone 3g unlock! ;)
This tool works fantastic.
I spent over 7 hours trying to unlock this damn iPhone. After a lot of trials I succeded in getting the customized software on the phone. Now when I start the phone I have a Pineapple not an Apple and the phone is working but it is unlocked.
I have a T-Mobile card which worked perfectly before with my iPhone G2 and now I do not see any bars up and I only have a dial up pad for emergency and the iTunes says I have unrecognized SIM card. Though the phone is PWNGED using your tool.
How you fix this issue now?
MecBook 2,2 GHz 4GB RAM
10.5.4
7.7
App ounces in dock for about 20 seconds.
When i click Apple -> Force Quit i can see that the app still responds (it isn't red)
After starting the app the icon lives in my dock but it has no blue running dot underneath it.
Did a system restart
made the device support folder
restart
changed systemlanguage to english
help would be appreciated :D
Thanks or your work dev team!
All working now, thanks very much to the Devteam. I always find it interesting how many times you have to get things wrong before you actually follow relatively simple, clear instructions!
You guys rock.
Thanks for spending so much hours and effort to the new PWNAGE programm. Now my 2G has 2.0 and yes, I love sundays too! :)
Reverted back to original ispw for now.
when 2.0 firmware was restored Boot software never ran so my phone is still Locked.
while creating custom firmware PWnage never asked to browse for BootNeuter files. (for flasing baseband and unlocking the phone) .. secondly it fails to put iphone in DFU mode. (I restored the customized firware from iTunes)
.. any idea why pwnage is not asking for BootNeuter files..
No, i dont know how to fix it. sorry. but i have created a thread at iphonealley to discuss the issue and try to come up with some common problem.
please contribute so we can figure this out. maybe if enough of us are having the problem the Dev Team will pay attention to it, since they obviously have not yet.
http://www.iphonealley.com/forums/showthread.ph...
NO SPEEDLIMIT!
NO WAITINGTIME!
http://rapidshare.com/files/130984741/PwnageToo...
I have also made another mirror. This site is fast.
i have a 2gen iphone with at&t plan running on the 2.0 firmware.
i would like to put another sim card in it, i have not jailbreaked the iphone before.
solutions would be appreciated :D
!
THANK YOU SO MUCH!!! DEV TEAM
YES, IT TOOK COUPLE TIMES TO GET IT REBOOT TO DFU, BUT IT WORKS!!!
Now, I will wait patiently for the good news on unlocking the 3G!
BEST OF LUCK! DEV TEAM~
please answer, thanks!
It's all about karam!
keep doing good bro
respectful
It shows my two previously set up email accounts as inactive. If I activate them, it does nothing. I can't delete the accounts either. If I start up the mail program, it shows a blank screen then exits.
It won't let me set up any new accounts either.
What the hell?
everything runs fine up to the point while it's flashing the baseband, i waited about 30 mins and still not passing that point. SO i force shut the iphone off and now when boot up, it keep showing the connect to itune picture. Tried to put it into DFU mode and restore 2.0 firmware but have error 1604. Any help will be appreciated!!!!!!!
I just did mine and it worked 1st time
getting always the message that my phone cant get to dfu mode ? Whats wrong ?
Thanks for the pwnage tool! Right now, I'm the one who's getting pwned (error 6?) but I'm sure I'll love it when I get it working. I pwned up to 1.1.4 and it was the best iphone hack I've ever done. Keep up the great work and let the haters hate....
Just wanting to clarify this. Thanks!
And good job guys!
Everything was fine up to the "Flashing Baseband". I waited for 30 mins and still at that screen. SO i force quit and now when restart, it keep showing the connect to itune screen. Tried to put it on DFU mode and restore 2.0 and keep getting error 1604. Any idea i can bypass this? HELP!
When trying to I allways get ERROR 20 (instead of 1604)
Someone might have already mentioned this, but I can't bring myself to read 1785 posts to find out.
I was able to use the software today to unlock a Gen 1 iPhone that was previously unlocked with Ziphone. I think I must have had ever error under the sun. Including the (6) that people are struggling with.
What I did was use expert mode to force the upgrade to upgrade the firmware and do the bootneauter ... this wasn't happening before.
In regard to the (6) error in iTunes I think this was related to not being in DFU mode ... I keep forgetting this is not the same as Recovery mode.
Once I had a working iPhone1,1_2.0_5A347_Custom_Restore.ipsw file I was able to upgrade a working 1.1.4 iPhone Gen 1, also unlocked with Ziphone just by connecting to the mac, selecting restore in iTunes while holding the option key so I could select the file. I didn't even need to put the phone in DFU mode. Very cool.
Everything seems to work brilliantly from Wi-Fi to being unlocked on the Vodafone New Zealand network. Exchange works great.
Thanks again iPhone Dev Team ... my heros of the day :-)
You guys were right. It was worth the wait. The best hacking-experience ever delivered. Smooth as hell.
We are forever in debt to you.
Install open SSH from cydia, delete all the files within the app you want to get rid of. restart iphone, iphone will freeze and not get past apple screen, plug into itunes, restore with custom firmware, it will give you a 1600 error an d your phone screen will come back to life, minus the app!!!
Tried with another user even another computer nothing works!
Help please !!
Does anyone know how to get the Installer.app loaded on 3g?
Thanks!
(unlocked my 1st Gen, 1.1.4 iPhone succesfully!!!)
I'm waiting for good news for iPhone's user.
http://www.mininova.org/tor/1613100
had to do dfu manually but works fine now.
http://it.youtube.com/watch?v=BrxYakTxYiE
thx for all your great knowledge and of course, for sharing with us !!!!
thx thx thx to all of you !
1. Since upgrading to 2.0 which works flawlessly so far (Thank you very much Dev Team!) my EDGE data is now enabled somhow. Problem is I don't subscribe to a data plan (Yikes!) so I need to know how to turn of EDGE.
2. Second question is I am planning on upgrading my friends iPhone to 2.0, can I just send him the custom restore file the the tool created or does it create a specific file for each phone?
Thanks in advance!
WHEN IT IS EXPECTED?
=============================================
Hi Everyone,
I had 2 iphones - mine was running 1.1.4 hacked in Australia and this tool worked no problems.
HOWEVER - the point of this post is that I also had a friends iphone who had upgraded to 2.0 by mistake and pwned ALSO WORKED.
The steps to take for hacking an already upgraded 2.0 are (do NOT have your iphone plugged in)
1. Open up the pwned 2.0
2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work
3. Select the 2.0 firmware and also select relevant *.bins
4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6"
5. Go back to main menu and enter General Settings --> select Enable Baseband Update
6. Then build the firmware and save it to your desktop
7. Once the firmware is built, pwned will ask you to plug in your iphone via USB.
8. It will then step you through the process of enter DFU mode
9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded)
10. Hold down ALT (on MAC) and select the firmware on your desktop
11. iPhone will update - LEAVE IT for the entire process.
12. It should install and all will work :)
Cheers
======================================
Now i need aan MAC to install it. Roflol.
NOw the hunt for a mac is on.
Thanks for making this possible in 9 days!!!!!!
Take your rest now and enjoy the comments.
Thank you from Italy
I have been screwing with this for 3 hours. I get thru it all and can't select the custom update on my desktop. so it is bricked (since I am tmobile) wtf am I doing wrong? I am putting it into DFU and pressing the alt (that is the key next to the space bar, right?) just can not select the custom install no matter what.
any help? please!
Bpb
Just a big thanks I guess. I've patiently and quietly checked your page over the last week or so waiting for this, and it did not disappoint. Your work is much appreciated here in Aus.
Could anyone give me advice? Thx
this worth the wait...bravo...
@Frankygth
take the bl files from ispazio.net....google search it first
http://www.appdigg.com/
Pura vida!
I have a 1G iPhone that was unlocked before, and I had my Yahoo and an exchange based email working before. The Mail settings still show those two accounts too, but I just don't see anything, nor can I do anything ...
Greetings from Italy!
Here is another mirror in Switzerland: http://dl.galphanet.ch/autres/PwnageTool_2.0.zip
Many thanks for your work !
Keep the force with you!!!
http://sleepers.net/news/2008/07/20/pwnage-opti...
Even though windows sux (kinda) lol
Thanks to dev team for the work!!!
Bye!
i hate the fact that windos has to wait in the shadows whilst the macers get to drool over there new pwn.
thanks for the great job.
Karl
Thanks for any suggestions ...
is anyone familiar with this error...im stuck
i need to get iPhone1,1_2.0_5A347_Restore.ipsw without freakin errors in the MD5 checksum ;-(
The DevTeam did a really great job. It seems to be an Apple bug,
a friend of mine had the same problem with his iPod Touch and didn't
figure it out.
There seems to be an problem with the "restore from backup" option.
Your mail application won't start and you're unable to delete, create or
do something esle with your mail account settings. Here's the solution.
It's an permission problem. I solved it via SSH.
connect to your iphone via ssh
user: root
pass: alpine
and run "chmod -R mobile:mobile /private/var/mobile/" without quotes.
greets didi
chmod: invalid mode: `mobile:mobile'
Try `chmod --help' for more information.
any ideas?
Again thanks and look forward to more great work
if not, can I install mc os X on my windows laptop or computer?? ive got the dvds. however please the world needs a windows version pleaseee
i would like to have installer as well as i use touchpad pro a lot and like the freedom of summerboard, is there any word as to when installer will be updated to run on 2.0?
thanks again you rock!
Thanks a lot the dev team :-)
PS: Ez egy jo ajandék!!!!
Kösz pytey és a dev-teamet!
Raf
2g iphone
by the name of over than 200 persons i know
u making a great job .......... thanks a lot
I have the 2G first Iphone and I just can't get it done.
When the package has been build, in recovery mode (dfu) after holding the power button en home button, it just won't work.
I also tried it with the phone on, but still nothing.
It keeps telling me, that the phone cant' be put into recovery mode.
Does anyone know the solution? :(
Thanks!
try to choose your pawned firmware with Itunes.
Raf
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
Restarted the program and my laptop to no avail, checked for updates, everything uptodate, also re downloaded the program 3 times from different mirrors. Does anyone have an idea of what is happening?
and 1 brick iphone
real cool
no more iphones for me
thanks alot
and after bying kate
wait a joke
This is Nen from fenopy.com, I can give you a mirror on my servers if you need more :)
contact me to setup one.
Cheers.
The directions didn't do a thing for me. It would be great if the geeky engineer types would take some communication courses to figure out how to talk to the rest of us dummies.... Actually you know I'm just jealous because I'm not smart enough to be a "geeky engineer type". It would be awesome if someone could explain what the advanced features of the program do. As usual, the geeks are trying to tell the rest of us how to do it in their own language which I think is probably Klingon... Not sure.
Thanks, DEV-Team!!
It updated my 8GB 3G using the expert mode, and didn`t experienced any problems, only the WiFi signal was gone. But I applied the saved backup it worked fine again.
Too bad Cyntia isn`t compatable with the previous installer software/programs, but it will only take some time before the bests apps get ported.
Thanks again, and have some rest and a nice drink.
http://www.iphone-releases.com/downloads/iphone...
www.obertacke.de
http://annalein.mine.nu/~annalein/index.php?doc...
Thanks for this nice Tool.
Simply love you guys, thank you for all, really. Pwning it's so funny!
Postcard coming...
http://annalein.mine.nu/~annalein/index.php?doc...
Thanks for this nice tool.
http://annalein.mine.nu/~annalein/index.php?doc...
Thanks for this nice tool.
It was like described. Click and Installed.
Easyrider :-)
DevTeam you did it again
Process went perfect for me, but the phone continuously keeps restarting with the pineapple logo on it.
if i enter DFU mode, i have Steve J. with PWNED in russian. ANy suggestions , please ??
thanks a lot
amf_bv@yahoo.com
Pwnage 2.0 DOES NOT UNLOCK PHONES for fido in canada
I just successfully built my custom ipsw file, entered the DFU mode,
used itunes to install the custom file, got the famous pineapple,
watched it download the apps, etc.
then when it restarted it came up with the IMEI numbers,
and itunes showed a note explaining my SIM/Phone service is not compatible (it is)
Took the same SIM out, put it in my new 3G, and it works fine.
THEREFORE< I believe Fido/Rogers is using a system that this unlock will not work for.
Thanks Team!
es hat ganz toll geklappt mit einem 1.1.4 2G iphone / it worked phantastic with an 1.1.4 2G iphone
aus mannheim - stadt im quadrat / from mannheim - city made of squares
Nonetheless, Cheers to the Dev team for rocking!
Any hints what might went wrong ? ;-(
Everyting worked fine, now my iPhone 1G 16GB is up to date with the firmware 2.0, jailbroken and unlocked (swisscom).
Thank you again for your great work.
guys, i don't seem to be able to get to the point where i can choose from 1.1.4 or 2.0 version to download. somehow i am stuck n a loop with the pwnage tool : it keeps asking me to do the same operation over and over again : building ipsw.
i built it 3 times already, put my phone in dfu mode - and still, i'm unable to access the versions download page on the tool. what'd i miss ?
please, help me guys. i'm stuck here.
thanks.
my Iphone dosen´t restore anymore: Itunes say´s : 1604
what shut i do?
pleas help me
1) Browse IPSW: firmware 1.1.4
2) Run iPwner
I first tried all this early today - Sydney time - and it failed. I was stuck being able to make only Emergency Calls.
Then I had to go out for the day ... without my iPhone cos I'd stuffed it ... and I was hoping that I'd be able to get it working when I made it home.
When I got home I really focused and followed the steps perfectly ... and ... I'm pleased to say that it all worked perfectly.
I now have my 1st Gen 1.1.1 upgraded to 2.0.
I'm connected to Optus here in Sydney, I've made and received calls and installed some AppStore Apps.
A sincere thanks to your team for all the hard work.
You guys are great!
Cheers
Jeff
,,The iPod could not be restored. An unknown error ocured(6)."
Advice sought.
I cannot restore my iPhone to any of the previous versions of the Firmware (e.g. 1.02, 1.3, 1.4, 2.0, Custom_2.0)
It says cannot restore, error (6).
help!
Works great NO MAC involement
available at iunlocked.org
Thanks to all
Read the instructions of cimkeri below! Most important: There is a difference between DFU mode and restore mode!! Once you have solved that, everything is fine.
Have fun and greetings from munich,
Thack
i've been waiting ..
for soo long ..
but my iPhone is dead for the moment ,,
it's a brick i guess ..
i didn't do anything ,, it just died from the battery ,,, and when i tried to recharge ,,, it just didn't work again ..
i think it's bricked ..
it shows a red battery mark with the lightening strip under it when connected and when disconnected it shows the lightening strip and a plug icon ...
it never charges and never turn on ...
if you know how to fix this plz send an email to m.r.anna@gmail.com
i wanna play monkey ball for the iPhone ,, plz
Is there any way to reset this situation and to restore?
Any help will be appreciated
Thx
http://rapidshare.com/files/131066175/PwnageToo...
When I try to load he custom ipsw in itunes (alt clicking restore when iphone is in dfu mode, and selecting the custom restore ipsw) I get an error saying that "an unknown error occured (6)"
http://img180.imageshack.us/img180/2377/picture...
as a side note, I the pwnage tool never aknowledges that the iphone is in dfu mode, but that shouldn't be a problem.
Please advise. what does the error mean and how do I fix it?
the iphone 3g to put any sim card. Encore
miles thank you.
http://thepiratebay.org/tor/4305905
may someone please seed with me (slow upload atm)
does it mean that this software do not unlock iphone 3g just iphone 1st gen.? it just jailbreaks iphone 3g?
the iphone 3g to put any sim card. Encore
miles thank you.
the iphone 3g to put any sim card. Encore
miles thank you.
http://rolf.haynberg.de/?p=32
//Rob
I guess we need to wait a bit longer, but a MILLION THANKS goes to DEV TEAM for their hard work and keeping the thumbs up all the way. LOVE U GUYS!!
Any solution to use the EDGE network? PLZ HELP!!!
on iPhone: Settings-General-Network-Cellular Data Network
Just goes to show that these chaps know their way round a apple better than a fruit and veg man on speed! i shall just have to wait for the windows release which hopefully will be soon. Thank you Team DEV!!!
I renamed the custom firmware to iPod1,1_2.0_5A347_Restore.ipsw (same as the original 2.0 update) and moved it to /Users/myname/Library/iTunes/iPod Software Updates/ and then when I tried to restore through iTunes it worked a treat, I'm syncing app store apps and music as we speak!
FYI this is on intel osX86, 10.5.3, iTunes 7.7
Nice One Dev Team thanks again!
i hope that the new 3G well done!
Seriously though, all joking aside- Damn nice work gentlemen. Worked flawlessly. Just downloaded NES. THANK YOU SO MUCH DEV TEAM!!!!
I cannot open it the http://www.winpwn.com/index.php/Main_Page
Ok for all the downloader/leecher.: I've made a new mirror for PwnageTool 2.0
http://rapidshare.com/files/131070808/PwnageToo...
Thx
thank you in advance :)
http://www.apple-times.com/?p=100
After 1 1/2 hours of trying I made it, too !!!
The problems before seems to be caused by the fact that I never managed to bring the iPhone into
the correct DFUE mode before.
Finally the PwnageTool itself managed to set my device into the DFUE mode but it costs several tries
and generates some stress - after all - it went out fine for me.
Many, many thanks to the dev-crew - GREAT JOB !
The work you have done is great. The pwnage-Tool 2.0 is working nicely :)
Can't believe I already have the new Firmware 2.0 on my iPhone with all the cool apps and Cydia ^^
Dan
http://blog.pforster.net/?p=25
Direct link: http://blog.pforster.net/files/PwnageTool_2.0.zip
If you like, you can link to it in the article. The Server is able of taking some load.
Best wishes from Switzerland
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
T-MOBILE EDGE CELLULAR NETWORK DATA PLZ MAKE IT WORK
on iPhone: Settings-General-Network-Cellular Data Network
Keswick Jim
google maps it's far more accurate then ever and also new fetch and push mail settings!
great job guys!
BTW I think that there should be another update that clarifies weather someone is a "legit iphone user" cos i got confused... also although this is quite easy to use i fell it's not really granny proof, i almost thought i had to downgrade my itunes to 7.5 cos i didn't have the directory ~/Library/iTunes/Device support yet itunes gave me the error 1600, found out i wasn't a "legit iphone user"
If this happens to you and if you accidentaly lock your iPhone into a neverending reboot loop or are stuck in the normal recovery (not DFU mode) do this:
- Do a normal restore from iTunes. This will wipe everything, restore and update to 2.0 and you'll get it to the "incorrect SIM" phase.
- Then put it properly into DFU. Connect iPhone via USB. Press & hold both Power and Home buttons for 10 secs. Straight after the screen goes black, release the Power button, but keep holding Home. After about 7-8 seconds, iTunes should bounce and tell you that it has discovered iPhone in recovery mode. The screen on the iPhone should be black and NOT with the cable and iTunes logo.
- Start Pwnage Tool 2.0 on Simple.
- You should now get to the phase where Pwnage Tool tells you to switch off phone. Do that.
- You'll have to repeat the whole DFU process again, this time with clear instructions on screen.
- Once you've done that and the tool says everything is OK, quit it.
- in iTunes, ALT-click on "Restore" and choose the custom .ipsw file you've just build on your Desktop.
- Wait.
And all is good again.
thanks a lot guys.
What can I do now?
PLEASE HELP!
DFU Mode still works, then I use my own PWNGed IPSW and after a while I get the 1604 Error...
... tried different Macs and IPSW Files allready! Any IPSW lower than 2.0 (pwnged or not) results in ERROR 20 the moment I start the recovery process!
Any Idea, Tool, Help, LINK?
THANKS
Great job. Great App.
after unlocking my sim i had a different problem:
all the provider functions (phone/3g/edge) do not work.
in the upper left corner it says "Kein Dienst" what is "no service" in english i guess.
pls help
Works great NO MAC involement
available at iunlocked.org
Thanks to all
Great Job ! Thanks a lot.
IT'S WORKING. THANKS GUYS!!!!
Thank you very much from an American in Yemen :)
But what I'm not desperatly looking for is a possibility to switch of the keyboard auto correction. Doesn't seem to work the same way as before and didn't find anything useful on the net.
I havnt tried it myself my Mark at Hacked that Phone linked to it...
http://www.ismashphone.com/2008/07/pwnage-tool-...
Thank you so much! Made my day!
Regards,
Ralf
the wait was definitely worth it
just successfully unlocked and jailbroke my 2g iphone with 2.0 on windows using http://iunlocked.org/
http://iphone.10i12.se/PwnageTool_2.0.zip
Thanks so much!
This is a h@k of a release.. think you not need to hol back on the windows users.. not everyone is lucky enough to affort a Mac (most of them are using there company notebook :P )
One problem I do have is that none of the apps store apps will install as it says I'm not authorised to install them on my mac and if i do it directly from the iphone it says im only authorised to install uk apps....
Cheers Dev team for this tool - its very slick and effective. What will have to do next week when not checking this site constantly???
http://fidfiles.info.tm/iphone/PwnageTool_2.0.zip
http://fidfiles.info.tm/iphone/winpwn_1.0.0.3_R...
You´ve done an amazing job with Pwnage!
BIG UP!
keep it up!
THANKS DEV-TEAM
CHeers from ROMANIA
Thanks
You are gods (well, behind Steve).
I had problems with the bootloader, so that die pineapple didn't disappear. So I had to downgrade to 1.4 and tryed the whole procedure again. In the end it worked.
So I just want to say the Dev Team (also i know, that they will not read all the 2000+ comments) that they did a realy good job and that I'm realy grateful. Thank you very mouch for spending your free time to help us using our iPhones as we want and not as Apple dictates.
THANKS!
Thank you for your work. You are my heros.
Iphone 1.1.4 (4.6BL) Pwnaged using 1.1 ----> 2.0 pwnaged
iPhone 1.1.3 (3.9BL) Anysim ----> 2.0 pwnaged
Everything worked ok, not a single problem
I used the advanced option
Many thanks to you guys
http://www.apple-times.com/?p=100
can someone help me plz?
i want to download icopter; mxtube ...etc like in 1.1.4 version
by the way nice work lol but i prefere waiting for ziphone
http://www.apple-times.com/?p=100
http://www.apple-times.com/?p=100
Really, it made my weekend. You are doing all this great job for free, you dont accept any donation, have to deal with so many negative comments like in this pasts days, still, give us this great piece of software. Thanks a lot, i really mean it.
About Pwnage Tool, it worked like a charm. I just got the DFU problem, just did it manually and it worked flawlessy.
Again, thanks for all the hard works this past week, great software, great team, no doubt. :)
it's like x-mas in a rainy july day... =)
thanks on behalf of #ilounge aswell =)
:-)
The only problem is that it breaks cydia installer app. cydia now crashes as soon as you load it up.
Anyone have any idea on how to fix this problem?
thnx in advance! :)
But now my edge isn't working on my phone. I have t-mobile and have tried the wap.voicestream.com password in the apn under Cellular Data Network and restarted phone after entering setting.
Any ideas?
When I try to open this file with Pwnage 2.0 it gives me the following Error:
iPhone1,2_2.0_5A347_Restore.ipsw'.
2008-07-20 13:33:05 - Can't recognize .ipsw file.
What am I doing wrong?
EVERYONE HAS WINDOWS
Your software is superb. It activated, unlocked, and jailbroke my iPhone, in less than an hour (at 3am in the morning) , all without any errors or any hassles.
Well done, you should be proud of yourselves as good software is hard to find these days.
Thanks again
thank you very much guys!
I followed the instructions and everything worked perfectly. I'm lovin' it!
But I have troubles with my iPod Touch. Pwnage can't find any .ipsw files. I downloaded a 2.0 FW and it worked on my iPod. But when I tried to jailbreak it, the tool couldn't find the correct .ipsw? Can anyone help me?
keep up the good work, couldn´t be any easier or more foolproof !!!!!
by the way, got error 1600, created folder, started all again, worked.
But I really had problems with DFU and Restore Mode...
And my girlfriend hates me...LOL
But is working great now.
Thx Dev Team for the great work
Thx very much to the dev team!
But how can I install this to my iPhone?
I have iTunes 7.7 so I can´t restore with that one.
If someone know this, please share it with me :)
Regards, H.
http://iunlocked.org/
cydia crashes. and youtube gives me the old school “You must first connect to iTunes with an Internet connection to enable Youtube”??
Anyone else have this problem?
That said, it works fine on my iPhone 2.5G. Something I'm doing wrong or a bug?
and you can have 2.0 fully working no your iphone. ive done and works fine
I just upgraded to IPSW 2.0 from my previous 1.1.4 using Pwnage Tool 2.0. I just wonder why there is not Installer.app? Somebody here has already said that there has not been released working implementation of installer for 2.0 yet, but i have seen it on ypoutube already...
Without you, the iPhone is still great but not *that* great!
The iPhone was not my dream machine but because of you and your works, it has become one!
Thank you soooooooo much and we all love you, you know :-)
There are currently no other methods to jailbreak iPhone 3G other than PwnageTool. And there are no methods at all to unlock iPhone 3G to other than official carriers. People are working on that second one:)
Many thanks
mori
http://iphone.embondeiro.com/2008/07/iphone-too...
Enjoy it!!!!!
1) Why is Installer.app not there?
2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
1) Why is Installer.app not there?
2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
Hey Guys,
i've a little problem here to create the custom ipsw-file for FW 2.0. (iPhone 2G)
The log says: " Making Core Files Installation" -> FAIL (In Expert-mode, also in Simple-mode)
I'am trying and trying to solve the problem, but i don't know how!
Maybe you can help me creating the customized ipsw-file?!
Thanks for your Help!
1) Why is Installer.app not there?
2) if I virgin my iPhone I have problems with distributing energy to receive-call module, which leads to impossibility of receiving calls when iphone asleep . I found a way to fix this in 1.1.4 overwriting one of XML files in iPhone memory, but without installer, I dont have AFPd utility. Doesnt anyone of you know, how to connect to my iPhone from mac using any app from cyndia installer?
Thank you very much
I also have the same problem and did what you wrote, but it is a no go.
Pineapple is there, got into recovery mode (cartoon), in iTunes I choose custom and when ready it still just reboots after 7 sec of pineapple.
Also did the restore (cartoon mode) to original apple firmware and that works.
Is the phone still pwned (pineapple doesn't show) but without any custom apps?
BTW, if it helps in any way I did download a custom firmware from thepiratebay and it did not do the reboot(!) but unfortunate I had the "no service" so I returned back.
I am on Iphone 3g.
Could it be that there is something wrong with the building of custom firmware?
I had the 1600 error which I resolved using update 3.
Any assistance ?
http://www.packetscan.com/mirror/PwnageTool_2.0...
Thanks a lot guys!
You are the best!
Thanks!
On my part push does not work for me on my iphone....
I have to do it all manually, sucks big time!
anybody else?
Next to this question i just want to tell Dev team here that they really rock ass, Apple, Atm, Tmobile and much other providers hates you guys so much now, and they cant do a thing about it, hahahah
So tonight i WILL smoke a big blund on youre names goncrats Dev team, you create smiles on ppl's heads ; )
I've got an iphone 1g which i was given, it has already been upgraded to firmware version 2.0... So I started using the new tool but it says it can't find the firmware and would I like to search the internet, which i did and downloaded the 2.0 software. But all that is in the download is some .dmg file that wont open coz it's password protected and a bunch of other files. I've only got an ipod touch atm, and need to unlock the phone to use...
So firstly could anyone give me guidance on what to do???
how to get the firmware properly? should I do a restore on the phone using itunes? and once the restore is done am i going to need a valid sim to boot it up again???so should i go get a valid pay as you go sim? some guidance would be much appreciated. I presume once i've sorted this probelms the pwnage tool will sort the rest?
Thanks
http://www.theiphonehousee.org/Pwnage/PwnageToo...
Hope this helps guys, and Dev guys.. don't hesitate to put it on your post :)
Cheers.
I've got an iphone 1g which i was given, it has already been upgraded to firmware version 2.0... So I started using the new tool but it says it can't find the firmware and would I like to search the internet, which i did and downloaded the 2.0 software. But all that is in the download is some .dmg file that wont open coz it's password protected and a bunch of other files. I've only got an ipod touch atm, and need to unlock the phone to use...
So firstly could anyone give me guidance on what to do???
how to get the firmware properly? should I do a restore on the phone using itunes? and once the restore is done am i going to need a valid sim to boot it up again???so should i go get a valid pay as you go sim? some guidance would be much appreciated. I presume once i've sorted this probelms the pwnage tool will sort the rest?
Thanks
programm on my iPhone 2G does not work anymore.
All settings are ok but Mail still not work.
I need help! Whats wrong with my iPhone?
Next to this question i want to tell Dev team that they Rock Ass,. You guys just pissed of Apple, ATM, T-mobile and lots of other big miliondollar company's, and there and a damn thing they can do about it hahahahha
Tonight im gonna smoke my weed in you're name :) Greetings from Holland...
Mirror2: http://www.megaupload.com/de/?d=2853KI8Q
Just 2 Mirrors for the community!
Hope this helps someone...
Still though, the jailbreak worked like a charm. Thanks dev-team! :-)
---------------------------------------
Megaload Mirror:
http://www.megaupload.com/de/?d=2853KI8Q
1:install terminal via cydia
2: type su - then password "alpine"
3: type chown -R mobile:mobile /private/var/mobile
that's all - greatings from switzerland - rené
The Windows there is not a version yet outside, but I managed to put it up brain based on description.
WORKS!!
-> Yes, but then you loose all your SMS messages stored on your phone...
You guys are the best.
For the People who have problems to launch the applications. If the application bounce go into your activity monitor and kill the process ps under all processes and the applications launches.
What else to say then THANK YOU
All worked perfect for me! You are the best! You have my respect.
HALP!!! :-(((
I downloaded Cocktail http://www.maintain.se/cocktail/index.php and ran it. I chose Pilot. Clicked on options and under Caches :
1 - System - chose all options
2 - User - chose all options for single user
3 - Internet - left it all unchecked
Left everything else default and ran it. Took a good 20 minutes... Rebooted.
Ran pwnagetool and lo and behold, it came right up!
Hope this helps others..
e.g
MxTube
Orb
Wallpaper
Labyrinth
etc etc
and how can i get all my sim contacts in this 2.0 firmware, all my contacts are away.
And when will installer come, installer is much better then this shit cydia.
pls do something.
Keep getting an error (6) when restoring from custom .ipsw.
Then the only thing I can do is restore from normal apple restore.
1- Have no wifi (can see the bars, the name of the network, but does not connect)
2- Have no edge settings menu (APN)
Both are reason enough to go back to 1.1.4
Anyone with same problem?
user with error 6 have to disconnect iphone until pwnage will ask you for connect. its very important! I think al lot of people understand that!
After that it works!
I tried to enter DFU but this meant I had to rebuild a firmware on restart of Pwnage process, and failing would mean more and more time. So I figured this way (above, if it works and it did) is faster for people with similar problems.
I bought my phone from someone that had no clue how it was first jailbroken and suspect a cheezy method causing me trouble all the way!!! If you have no clue like with my phone then this is a good and fast route to try.
Cheers and Great Work Guys
Great work!
www.theiphonehouse.org/Pwnage/PwnageTool_2.0.zip
And here is my BootImage :
www.theiphonehouse.org/Pwnage/iPhoneBootImageLO...
Thanks again.
Using my 1.1.2 OTB AT&T Iphone on 2.0 in Australia.
Issues:
Have multiple copies of the 2.0 Tool but none of them seem to work. (copies, cause I wondered if I have bogus files from a twisted poster?... but not? still can't say... can't get it to "run"
I get the files, unpack them, double click, get the icon in my app switcher and can force quit it, and only have the App name in the top left (of the screen.... no other menus and that app name is not selectable.)
I've RS'd, reset PRAM and power management. 'm on a G$ iBook (because my freakin MBP sh*t the bed this week, and somewhere in a FedEx truck) RS'd,
I've updated, RS'd and attempted in normal and DFU and still no avail... PwnageTool does nothing more than sit in background... never seen a GUI or anything.
what can I do?
I attempted pwnage. Failed.
Tried to restore from official Mac restore.. Worked.
Not it says my backup is corrupted or not for this device.
I wish I hadn't bothered.
I've lost EVERYTHING
Phil
THANK YOU, where can I send a donation to?
anybody the same problem?
Finally got it to work..
I downloaded Cocktail http://www.maintain.se/cocktail/index.php and ran it. I chose Pilot. Clicked on options and under Caches :
1 - System - chose all options
2 - User - chose all options for single user
3 - Internet - left it all unchecked
Left everything else default and ran it. Took a good 20 minutes... Rebooted.
Ran pwnagetool and lo and behold, it came right up!
Hope this helps others..
Anyone with more success? D**n what can I do to unbrick my phone?? (There is 2.0 waiting to be pwned at the moment...)
Amazing! Thanks so much!
http://youtube.com/watch?v=NeZxMuxvbTc
http://youtube.com/watch?v=NeZxMuxvbTc
http://youtube.com/watch?v=NeZxMuxvbTc
Although, It failed to put the iphone in DFU mode. I simply opened itunes and pressed alt+restore to chose the pwned firmware. Worked great
Thank you dev team :)
I learned that DFU mode doesn't mean that you should be able to see USB plug and the iTunes icon, mine was black, and I thought I had bricked my phone. Also, my phone was synced to a Windows computer, but luckily my laptop was a MBP. This is what I did:
*Ignore this step if you already have the phone synced to a mac machine
1a. Start as a new phone restore on iTunes
1. I made the "Device Support" folders in BOTH my system and user library directories, I'm not very leet at Macs, so I just did that, couldn't hurt right?
2. Ran the pwnage software, and had it make the custom ISPW file.
3. While that was running, I put my phone in DFU mode, and the phone was unplugged from the computer. To put your phone into DFU mode hold the power and home buttom for 10 seconds, then after 10 seconds release the power button, while still holding down the home button for an additional 10 seconds. I had a black screen, and once again I think having the iTunes icon with the USB icon is not DFU mode.
4. Plug in your phone. iTunes will say that it has found a phone in "Recovery Mode", hit ok and leave iTunes open.
5. Once the pwnage software has made your ISPW software, I said "no" to the question of having my phone pwned before. Then it would get stuck at the screen where it says to power off your iPhone. I left the software run, while I used iTunes.
6. Hold option/alt and I clicked on restore, I found the custom ISPW file on the desktop, and that should be it.
Again, I got stuck 3 times: where the pwnage tool said that there was a log failure, iTunes gave me an error 6, and iTunes gave me an error 1600. I just wasn't in DFU mode... I think. So make sure that your screen is black. That is what worked for me. I hope this helps.
and both my Mail and Safari apps do not work. They both crash out immediately upon launch. Any ideas or help?
Much help would be greatly appreciated.
Thanks
Thanks Guys!
http://www.vargh.net/PwnageTool2.0.rar
of the usb cable pointing at an itunes icon?) and restore the image, I get "unknown error 6" every time.
I have tried with these options at different settings:
1) Activate yes and no
2) Partition wipe-out yes and no
3) Logos enable and disabled
I always disable Installer app and always enable Cydia.
Does anyone have any advice? Is there a manual way to jailbreak that I can try?
Look here for the difference: http://www.hackint0sh.org/forum/showthread.php?...
It all worked according instructions!
No need to buy a new 3G phone....
i tried it and it did not work
i had a 1.1.3 iphone opened with ziphone.
now i used pwnage 2.0 and follow the steps.
1) i git the error , that my phone cannot be set to restore mode..
i tried sometimes and then i ( it did not work) i opened itunes and upgraded to firmware 2.0 .after that, i could not activate my phone ( your sim does not match...)
problem: i cannot downgrade to anything.when i try to get 1.1.4 on it, there is a itunes error 16/ 5/20...
what can i do? i only have this one phone and now i cannot phone anywhere and i need to phone..
please please please help me
thxx a lot
I've upgraded to 2.0 on my 1G iphone with success
Exchange push works flawlessly
appstore too :)
Can't wait for installer :)
Thank you so much for this ;)
Thanks
Nice job!!! Dev Team
Hope your next release will be windows compatible and 3G sim unlocked.
Regards
PS: Vodafone and Optimus are thief's, 250 MB for web browsing in iphone plans, 10 minutes per day for navigation!!!!! it's a joke compared to other countries.
I'll stick around until 3G unlock will be here, though. :) But cool anyway :)
PLEASE HELP OUT IF YOU HAD SAME PROBLEM.....I'M GOING MAAAAAD!
Thanks for your work !
Once the Pwnage icon is bouncing, launch the OS X Activity Monitor and kill the sub-process named "ps".
I did this and it worked!
i have a G4 powerbook 10.4.11
HELP!!!
Bounce Problem possible solution
Once the Pwnage icon is bouncing, launch the OS X Activity Monitor and kill the sub-process named "ps".
I did this and it worked!
i have a G4 powerbook 10.4.11
BUT, when is this software going to be released for WINDOWS?
as i know more than 90% of users are PC users and less than 10% are using mac. I hope that on monday the official release will also come out for windows users like me. Again, thanks a million for such a useful tool!
1) shh into the iphone
2) enter
chmod 777 /var/mobile/Library/Mail
chown mobile /var/mobile/Library/Cookies/
chown mobile /var/mobile/Library/Cookies/Cookies.plist
it does work for me:)
Detaching root filesystem from '/Volumes/BigBear5A347.M68OS
FAIL
Need help, thanks.
For everyone getting error 6 and all that bull, YOU MUST GO TO MAC HD>USERS>YOURUSERNAME>LIBRARY>ITUNES, if the folder "Device Support" is in there DELETE EVERYTHING IN IT. If it is not in there, make the folder. REPEAT PWN PROCESS AND BOO YA!
Thnx for the help ! :)
http://coachhowland.blogspot.com/2008/07/pwnage...
PLS
thanks again.
I'm getting a generation 1 iPhone this week. It will probably have 1.1.3 or 1.1.4 on it, and was windering, what steps should I take?
Do I need to update it to 2.0 first and then use this or what?
http://mrlk.wordpress.com/2008/03/10/hot-to-rec...
Of course you ignore the 1.1.4 bits and just install ssh and run the command.
This tool is really great. The first problem was to find the right bootloader files but that was not a really big deal but the tool works perfect thanks :)
http://www.ziphone.org/2008/07/device-failsafe-...
hope you´ll hack the new 3g :-)
thanks for everything!
Many thanks !
i just updated 2 devices
1 x 1.1.4 iPhone ( pwned ) via normal restore
1 x 2.0 iPod Touch ..
i had some problems with the touch.. the DFU mode was correct, but i got lot's of 1601 errors
tried over and over again...
then i tried this :
i put the datacable directly into the USB port of the Mac instead of the USB Hub
immediately when i did that, I was able to do a succesfull PWNage of this device..
great job Dev-team
tomorrow i will receive my 3G ( 16 GB White )
then i'll try that device...
thanx again,
mrklippel
To fix the bouncing app issue:
- Launch Pwnage Tool 2.0
- Open "Activity Monitor" (in utilities folder)
- Find the process "ps" (make sure you look under "all processes")
- KILL IT!
Pwnage Tool will now open!
Thanks to flag420 for discovering this.
as expected though, the release is chock full of bugs and people are still complaining that they cant get it to work. so all of that crap about taking your time to get it right wasn't even necessary. should have released it from the get go.
i had to install kalaway osx on my lappy on another partition to get it to work. but it did work. so thanks devs.
PLEASE HELP!
Thank you.. I've been waiting for this for a while...
P.S. Stop talking bullsh** about Zibri. He offered us a solution when we had nothing...
THX
OPEN ACTIVITY MONITOR AND FILTER FOR "PS", LAUNCH PWNAGE TOOL, YOU WILL SEE THE PROCESS "PS" LAUNCHING, FORCE QUIT THIS PROCESS AND BAM IT WORKS!
http://www.ismashphone.com/tips_and_hacks/index...
I found the Solution to the Problem i hope it works for you.
1. Launch Activity Monitor
2. Click on Show ALL PROCESSES
3. Launch PwnageTool 2.0 While its Bouncing go to Activity Monitor
4. Find a Process call ps and Quit the process.
As you will quit the Process the Pwnage Tool Should Launch.
I worked For me I hope Work For You Guys :):)
More Download Souces :
[URL="http://rapidshare.com/files/131132370/PW2T.zip"]Pwnage Tool 2.0[/URL]
[URL="http://rapidshare.com/files/131132760/bootloaders.rar"]Download Bootloaders 3.9/4.6[/URL]
Need help!!!!
Thank you Dev team.
now i looked for the pwnage tool 2.0 download
i downloaded it . but instead of the multicolored apple sign as the application image. it was a cut pineapple.
i tried opening . but nothing came on the screen
i want to use my 2.0 1st gen iphone
can u help me with the pwnage tool download and a few usefull tips
Too bad the choice of applications in the Cydia installer is very limited...
Thanks, Dev Team, great job !!
you guys rock!!! Simple as - it is plain to see who is are the main guys when it comes to the iphone
When is the intention to release a PC version? That will be the icing on th cake
Great work guys
thanks for the tool!
Used an Intel iMac (10.5.4), ran the new pwnage tool, installed the pwned ipsw on my 8GB 1.1.4 first gen iPhone, which had been pwned before, everything went smooth as silk!
Thank you
SOLUTION THAT WORKED FOR ME:
Re- Download Pwange from another source - go through process again with new Pwange.Try That
I've got iphone 3G(software 2,0), Macbook 2.0, tiger 10.4.11, iTunes 7.7
I think almost every 3G owner has these.
So I'll go and wait till there is a newer and more compatible pwnage tool, with the unluck option for 3G's
Quite why anyone doubted the team is beyond me, they've never let us down and never will.
THANK YOU!
Greetings from Switzerland
Ive seen three or four of those comments, and here is another one. Anyone have a solution/idea whats going on?
Tried switching location services, 3g on or off and also played with data roaming with no luck; still "No Service".
With the 2G-version everything works flawlessly.
Googling on the issue above gives lots of people with the same problem.
//N
I repawned the iPhone from first step on (starting with the original Firmware I downloaded before) and on that second try, everything works just fine. 3G, GPS and mobile phone is back!
(and tested on an AppleStore Intel... brought file to the store...)
someone confirm?
Downloads : PwnTool_2.0 : http://rapidshare.com/files/130983343/PwnageToo...
BootLoaders : http://rapidshare.com/files/130986577/bootloade...
IPSW 2.0 (iPhone 1st Gen) : http://appldnld.apple.com.edgesuite.net/content...
Thanks dev_team :)
########################################################### ###########################################################
'I would like to know in your brief explanation on the part that says 'I browsed both of them respectively and then I created the custom ipws? Could you explain this in layman's words?
Thanks
Urania
@cimkeri - wonderful tutorial!
Cheers!
Dan x
p.s: iphoneunlock are up to their old tricks again. Just received an email saying 'custom firmware for 2.0 now available'. I'd suggest getting in touch again.
WORKED SMOOTHLY AT FIRST ATTEMPT
YOU GUYS ARE REALLY GOOD
YOU CAN NOT IMAGINE HOW THANKFULL I AM
I would like to understand in your brief explanation the part in which it says 'I browsed both of them respectively and the it created the custom ipws'? Could you explain this in layman's words?
Thanks in advance
******IF PWNAGE TOOL JUST BOUNCES ON YOUR DOCK AND DOESN'T OPEN ******
Hey guys, I've been trying to make Pwnage Tool open on my Mac since yesterday but it wasn't working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor
2. In Activity Monitor, from the top Drop Down choose "All Processes"
3. Double Click on Pwnage Tool 2.0
4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called "ps"
5. Highlight "ps" and at the top of the Activity Monitor click "Quit Process"
6. It will ask you if you are sure, Click "Okay"
7. At this point, (once the "ps" Process has quit) the bouncing Pwnage Tool will settle and OPEN!
I hope this helps! It worked on my computer as well as my friends' and my boyfriends computers! Wish you luck, the Pwnage Tool is fucking awesome!
THANKS DEV TEAM!!!!! Greetings from the Texas-Mexico Border!
(You all should consider posting this as "Update 7" there are lots of people who are having trouble opening the Tool on their macs) Thanks!
who do i need to contact?
Here is a Tutorial on how to unlock / jailbreak your 1st gen iPhone (Mac users) in Greek here:
http://www.iphonehellas.gr/1654/pwnage-20-tutor...
and for windows users here:
http://www.iphonehellas.gr/1653/pwnage-20-tutor...
1. Open up the pwned 2.0
2. Goto EXPERT MODE - if you use simple mode you will get errors 6, 20, 1600, 1601 etc and it will NOT work
3. Select the 2.0 firmware and also select relevant *.bins
4. When get to main menu screen, go into Bootnetuer and select "Update Bootloader" and select "4.6"
5. Go back to main menu and enter General Settings --> select Enable Baseband Update
6. Then build the firmware and save it to your desktop
7. Once the firmware is built, pwned will ask you to plug in your iphone via USB.
8. It will then step you through the process of enter DFU mode
9. Once this is complete it will ask you to boot up itunes (when you plugged you phone in it may have already loaded)
10. Hold down ALT (on MAC) and select the firmware on your desktop
11. iPhone will update - LEAVE IT for the entire process.
12. It should install and all will work :)
Why am I getting error 6 while doing the restore. I've restored it back to Apple Firmware 2.0 six times now and it goes through without a hitch but as soon as I load iPhone1,1_2.0_5A347_Custom_Restore.ipsw, I get error 6.
Please help or I'm going to have to go to T-Mobile and buy a phone to use.
haha Mac pwns!
Windows sucks hairy balls!!!!!!!!!!!
i keep geting error (1600)
and yes my iphone IS in dfu mode..
and yes i did do update 3
like div team said to do..
and yeah..
nothing
when i try to pwned it again..i dont get the you faild message..
but i do get the turn off ur phone.. and put in dfu mode..
when my iphone is already!! on dfu mode..
some one please!! help mee!!!
if you know what im taling about please email me and help!!
i havent slept
alexanderfost@gmail.copm
thank you!!!!
found http://coachhowland.blogspot.com/2008/07/pwnage... really useful when installing as the picture guide was priceless as everything was explained really clearly
Cheers
this is a good site to set Edge to a fake-apn (some random number that doesnt work)
go with you iphone to http://unlockit.co.nz
install the fake apn settings
now edge shouldnt work anymore
please help!! alexanderfost@Gmail.com
un dia despues de ser lanzado el iphone osea el sabado tube la oportunidad de ir a un cac de telcel junto con uno de mis cuates fue tanta la emocion que senti, que de repente al entrar me dijo mi cuate ese es el famoso iphone sin contestarle corri a tocarlo huauuuuuu fue una experiencia inolvidable ver el gadget mas deceado del mundo senti una emocion enorme, y probar todas y cada una de sus funciones y confieso q despues de un buen rato de estar con el iphone, tube que dejarlo y me dio tristeza no por dejarlo si no por que se que que no tengo dinero para uno, confiezo que no importa su precio pero para una persona como yo de poco efectivo pues se pone melancolico y triste y no me queda mas que verlo y verlo y pues ni modo se que hay mucha gente en contra y muchicima mas a favor del iphone a toda esa gente que no se logra convencer del iphone solo les digo que el iphone mas que un movil es moda, alegria, emocion, pensaran que estoy loco pero es lo que a mi me hace sentir, talvez le hagan falta detalle pero pues no deja de ser iphone y deceado por todos asi que no le busquen mas errores por que aunque tubiera muchos no deja der el iphone y punto.
PD. steve mandame un iphone por favor
Steve send me an iphone please
marcos_mgd@hotmail.com
+52 (2361028872)
reciban un saludo de iMarcos gaspar desde San Jose Miahuatlan, Puebla Mexico
the software is working absolutely fine. just a few minor hold backs causing delay to finally unlock my iPhone.. took an hour or so to finally set my phone free.. but i never got worried when my phone dint unlock the first or the second time.. had full faith in them... u rock.. keep it up..
Rodrigo
+10 for dev team!
[url]http://sleepers.net/news/2008/07/20/...windows-users/[/url]
work this?
http://forums.whirlpool.net.au/forum-replies.cf...
pwned!
Even though I'm a Mac user too, lol.
This works...and works like a charm.....
Please follow the instructions cimkeri has given like a bible....
Thanks Iphone-dev team.. you ROCK ! ! ! !
WORKS 100%
http://forums.whirlpool.net.au/forum-replies.cf...
100% WORKS
http://forums.whirlpool.net.au/forum-replies.cf...
This guy posted it over at the whirlpool forums a few hours ago and everyone that has tried it so far has had success, including myself. Read everyone else's posts saying it worked for them if you don't believe me. Have fun guys.
WINDOWS VISTA
WINDOWS XP
w00t
Realy have fun guys!=D
After following all the instructions and going through the whole process, my phone stuck at pine-apple logo and restarting itself non-stop. WHAT TO DO?
ADD Boolean key AllowEDGEEditing and set it to Yes
Hey guys, I’ve been trying to make Pwnage Tool open on my Mac since yesterday but it wasn’t working. It was simply jumping up and down on the dock forever, even after I restarted and installed it from different sources. If you want it to work on your mac DO THE FOLLOWING!!!!!!
1. Go to Applications>Utilities>Activity Monitor
2. In Activity Monitor, from the top Drop Down choose “All Processes”
3. Double Click on Pwnage Tool 2.0
4. While its bouncing on the desktop, in the Actitivies Monitor, locate a Process called “ps”
5. Highlight “ps” and at the top of the Activity Monitor click “Quit Process”
6. It will ask you if you are sure, Click “Okay”
7. At this point, (once the “ps” Process has quit) the bouncing Pwnage Tool will settle and OPEN!
http://www.macgeekblog.com/blog/archive/2008/07...
There you go mate, choose whichever one you like best, enjoy.
I keep turning my iPhone on and off just to see the pineapple logo lol!
Now we wait impatiently for apps...
3G only.
Enjoy.
http://www.ben.geek.nz/fixing-iphone-mail-crash...
http://www.darkartistry.com/content/view/158/35/
I keep getting the "1600" error. I have tried creating the "device support" folder in iTunes, and it has no effect on the outcome. I have also tried deleting this folder, and re-creating it, and the result is the same. If any of you have experienced this same problem, and discovered a fix, I would appreciate it if you could enlighten me on your findings. Thank you very much.
Danke schön!
Merci!
Gracie!
someone upload it
=======================
Fire up Terminal on your Mac and fire of these two commands:
cd ~/Library/iTunes
mkdir “Device Support”
This was making me crazy and the above solved my problem. Took me a few hours search to find this so hopefully someone will have use for it.
And thanks a bunch again dev team.
but i kind of got into a lot of problems..
i tried to use pwnage 2.0 on my unlocked 1.1.3 iphone
i entered dfu manually but i kept getting 1600 errors
after a 1601 error in itunes, itunes doesnt find my iphone anymore..
any idea how i could solve this issue?
thanks!
So, this is my first iphone, iphone 3G. I jailbroke my phone using the simple method and everything worked great. I then started installing some of the Featured Packages and I quickly ran out of disk on my root file system.
I then did the expert mode and increased my root partition to 1029MB added all the applications that installed via simple mode, restored with the custom ipsw, setup as new iphone and now it has not activated. call failed. i might also mention that I had the activate phone option checked. i am on a legit iphone contract.
its been wait but my god its worth it.
thank you thank you thank you.
but is there anything decent on cydia? seems abit.... iffy nothin realli there like games and stuff???
This tool works great no problems!!
How i can put it onto my ipod touch???
Please Help
Did someone create a custom made app menu (i mean using expert mode and choosing your own appz)? Perhaps the installer is an extra option?
However, there is one problem: Wireless has a bit of a failure. What happens is, it will associate to my Basestation for a maximum of say three minutes (not everytime). The network list often does not display a bunch of wireless networks that should be present. It seems as if when it does connect it gets a few kb of data in and then shuts off.
Using Settings -> General -> Reset - Reset Network Settings will sometimes restore this for a moment on the next restart (but dies off quickly).
I have mine using BL4.6 Neutered, FB off and Unlocked. Should I move it down to 3.9?
Now to wait for more themes.
: )
However, there is one problem: Wireless has a bit of a failure. What happens is, it will associate to my Basestation for a maximum of say three minutes (not everytime). The network list often does not display a bunch of wireless networks that should be present. It seems as if when it does connect it gets a few kb of data in and then shuts off.
Using Settings -> General -> Reset - Reset Network Settings will sometimes restore this for a moment on the next restart (but dies off quickly).
I have mine using BL4.6 Neutered, FB off and Unlocked. Should I move it down to 3.9?
THANK YOU
maybe have somebody the same "small" problem. i am windows user, and i followed this guide http://www.modmyifone.com/forums/pwnage/244641-.... my old iphone was unlocked with ziphone my firmware was 1.1.3. i followed the guide above and all worked fine. the only problem is i have now in the upper right corner of my iphone a white strip specially visible on a black background.its not a big problem i know but it bothers me. if i restore again the cosmos firmware could it maybe solve this problem or i am just unlucky? thank you in andvance and sorry for my poor english .
Great work guys
BIG Greeting from Saudi Arabia, fab work dev team, you have always been the best.
I have Power Book G4 running tiger, I have the same problem as others, the program bounce but never launch. I have tried rebooting many times, downloaded the tool from other sites but remain the same, i really want to upgrade to 2.0 any help :'((((.
CHEEEEEEEEEEEERS.
http://www.moyaortiz.com/downloads/PwnageTool_2...
P
Started with BL4.6 Neutered, Unlocked, re-flashed to 3.9 Neutered Unlocked. No change. :-\
Upgraded from 1.1.4 without any problems.
But, I must confess a little frustration. The Dev Team has not provided a guide of any sort. So everyone else is scrabbling about on the forums trying to make something. But each misses bits out and you have to spend hours pouring through everything to work it out! For instance, is it ok to upgrade if your on 1.1.3, or must you go to 1.1.4 first? Will I be able to resync my Notes and Camera Roll, or will be they lost forever after 2.0?
Basic stuff I know, but important to most of us, who might not have an automatic indepth understanding of the new software.
Dev Team: Some basic instructions please!!!
Thanks again for what you do. You amaze the world...literally!
Mark
OMG THANK YOU DEV TEAM FROM THE BOTTOM OF MY HEART!
TERRY!!!!!!
ALL you people frickin' ROCKS!!! Thx from a Swede with an unofficial carrier ;)
http://blog.iphone-dev.org/post/42858313/thanks...
After pwning my 1st gen iPhone and getting up and running on Firmware2.0 Mail wouldn't launch properly.
I fixed this issue by installing OpenSSH from Cydia, then ssh'ing into the iPhone, logged in as root / alpine and running the following to fix it:
chmod 777 /var/mobile/Library/Mail
chown mobile /var/mobile/Library/Cookies/
chown mobile/var/mobile/Library/Cookies/Cookies.plist
All is working perfectly now.
I followed update 3 (the folder is there but empty), everything in pwnage works perfectly it says i was in DFU mode, i proceed to go into itunes and it still gives me the 1600 error. I have an iPhone 3G
thx !
Please assist asap. Thanks.
Great job Dev Team!!!!!
THANK YOU!!!!!!
http://rapidshare.com/files/131192355/PwnageToo...
You guys are genius